RYOBI ONE+ What Do Pros Think?...6 Tool Combo Kit Unboxing/Review

LIKE...SHARE...SUBSCRIBE...COMMENT
www.tmntg.com
Contractor with 40 years of construction experience building houses and remodeling gives his opinion on Ryobi One+ tools. In this video we unbox the 6 tool combo kit you can get from Home Depot. Link is below.
www.homedepot.com/p/RYOBI-18-...
Link to Pegasus WORX table. Check this video out below.
• Best Work Table For Th...

[@danielentaltsev6680]

I’m a finish carpenter and recently had to start buying my own tools. While the other guys are tangling around with air hoses I’m running around fully cordless sanding with a cordless vacuum and all. RYOBI gets you the tools that do what the expensive ones do for half the price. A bright green tool is also hard to loose.

[@avelezusmc7929]

I'm a plumber and I have been using ryobi for over ten years absolutely the best bang for my dollar

[@makinlifework9345]

We’ve heard that from other plumbers as well. Thank you for watching and leaving a comment. Always enjoy hearing from those working in the trades.

[@hugoflores5806]

@@RONSDONKEYS When broke every rouble counts

[@matteagle8206]

@@RONSDONKEYS hell yea, especially when they may sayers try out my Ryobi HP gear and they hang their heads and say it's good stuff hahaha

[@willia3r]

Which Ryobi drill(s) would you recommend for home maintenance, DIY, and occasional paid handyman jobs? And which driver to buy, drill or impact?

[@daniellawless92]

Same

[@pigeonforgetnnet]

I think a lot of tool snobs hate on ryobi I own 20 different Ryobi tools. I enjoy the low price, I am just a dad with tools.I can buy a Ryobi tool do a small project and not break the bank. I may use a saw 3 times a year. I own a bicycle I enjoy riding some, It wont win tour de France. why does everyone throw Ryobi under the bus in the likes of Milwaukee. its a great tools for Guys who just play on weekends. my son in law always sneers and hates to use my ryobi tools. The point I make is I got 20 vs his 3 dewalt tools. low entry price solid dependability for Dads with Dreams!

[@johnnycampbell3422]

Roger that

[@bells1739]

You have so many tools he doesn't you could do an infinite amount of jobs on your own that he would have to borrow or rent just to complete.

[@bread-gz3rl]

Milwaukee is the real garbage to me, they're overpriced and have been basically the same tools for like 7 years. The new HP ryobi tools have basically replaced ridgid and if you need more power buy dewalt flexvolt.

[@Yata69]

Oh, electricians use Ryobi all the time. I just got the Ryobi SDS + and it runs like a champ!

[@BrandonSmith-jz3zt]

Admittedly I only owned the Ryobi brushed stuff for a short period of time before I bought all the new HP stuff. I can say I have had good luck with most of it. One of the things that keeps me buying into the Ryobi stuff is all they’re gadgets and gizmos. The fan is awesome.

[@Antattack22]

Just past Saturday i did a whole new door jamb and the tools gave me no issues really first time ever doing a project that size just regular guy doing a job and used the airstrike nail gun too for brick molding n interior frames and very amazed with it

[@connieoxley]

Loved the video, I know it’s been out awhile but I just started using power tools. It was great to see the perspective of the 40 year professional.

[@emiliohidalgo7678]

I’m an hvac contractor I use Dewalt and Milwaukee every day my opinion ryobi tools are made for homeowners but I’ve seen them in a construction side (window installation) working like any other brand I even ask the guy his opinion about it he told me that he bought it because of the price but he is happy and planning to upgrade to the hp + line ,recently I bought a ryobi 18g nailer work fantastic I believe if you are a contractor planning to use them every day buy the hp+ line brushless A friendly reminder treat your tool well clean them at least once a month all it takes is a little bit of wd40

[@Tammacazi10]

I've had my Ryobi tools for about a year now and I love all of them. They each serve their purpose well and they are surprisingly powerful. I also take great care of my stuff so I expect them to last for years on end. Thanks for the video!

[@makinlifework9345]

Thanks for sharing

[@elites_1701]

So the cordless saws work good?

[@Tammacazi10]

@@elites_1701 I have the 6 1/2" circular saw and it works great! I had a small drop with it bending the deck but I bent it right back and works great still!

[@AlexanderRodriguez-vs3xk]

Do they ever spark? Mine spark almost all of them but work just fine ?

[@breeze787]

What's great about using Ryobi tools professionally is that you don't worry about them being stolen. And if they are stolen they are cheaper to replace. My Ryobi tools are the vintage blue. My Ryobi tools are old and still kicking doing what they are meant to do. I do own an 18V Dewalt circular saw and it barely cuts 1/2" ply on its way to bogging down. Ryobi is the Most Innovative tool manufacturer in the world. Don't let their prices fool you cuz Ryobi tools can handle the work.

[@kimchee94112]

I modified my old blue Ryobi 14.4V circular saw to accept the new Milwaukee 18V batteries. What a difference in performance! Don't recommend it tho eventually the poor little motor couldn't handle all that extra power after repeated use. Both of my old 18V DeWalt and old 18V Milwaukee circular saws could barely rip 2x4 studs. About 24 inches of ripping was all she went, it wasn't the saws its was the old style nicad batteries. Once replaced with lithium-iron batteries those saws went on a tear.

[@jjw5165]

I used to be a cut man on carpentry team. For hevy or regular use then get corded toold. Ryobi makes good stuff

[@nunchaku4607]

I began a handyman service in 2003 and a friend bought me a Ryobi kit and it was ok, all the tools were blue back then. The drills were the best and the rest wore out just over two years. The batteries didn't last very long between use but I kept with them until they came out with the green and lithium 18 volt batteries and it was a game changer for me. I have used DeWalt drills in the past but I like the Ryobi drills more because they are lighter and they feel better in my hand. Currently I have 3 Ryobi drills and one of them, the oldest, is around 9 years old and still going(it makes a high pitch 'ruuuuu' noise though) but it still does what it needs to do. Ryobi drills are hard to kill. I have a 6 pack charger now because 2 of the chargers gave out and one I left in the rain and it was done...it was not plugged in either.If a single charger gets wet, you can dry it out, doesn't matter, it's toast.

[@makinlifework9345]

@Nunchaku thank you for telling us about your experience. We will be doing a video in a couple months to let everyone know how these tools have held up on the job site.

[@user-qc7me2hs5c]

There not bad tools actually it’s my first power tool kit a few years ago and my dad jacked them from me and uses them for around his house he’s very impressed and he loves his Milwaukees

[@thebuff7271]

You can't beat this!l..All those tools for $200!!! This combo will do anything the DIY needs to do... anything!

[@baileylewis6543]

What helped me make my decision to purchase this kit was that I already had several tools in the series, three batteries, and two chargers. It will be perfect for what I need it to do.

[@zachwithastache7898]

Picked that kit up for $200 about too remodel my bathroom and get my porch built and after this I think it was well spent with me luck

[@6mmtactics385]

My multi tool and circular saw have died, and the drill chuck fell out mid job, it still works you just have to put it back in, looking to step up to the brushless line next

[@deathcometh61]

Hvac rough-in. Started with ryobi. They did a lot of work.

[@daverussell8278]

I'm a Kitchen and Bath contractor, I use Ryobi tools on the job and Makita at the home shop. I have used Ryobi since the blue and yellow days, still have a couple of tools that are useable. If and when the tools die I will replace with brushless but that hasn't happened yet. The 4 Amp hour batteries are great, some of mine are 8-10 years old and doing the job. I even bought my wife a Ryobi battery op lawnmower for use around her gardens- she loves it and thinks the exercise she gets pushing it around is a good thing.(I do too) I originally bought Ryobi for the price but now I see some of my co workers with the more expensive stuff having to replace tools that die and I don't see why I should spend the extra $$$ for unreliable performance. One thing I don't do is beat on tools or leave them in the wet or use dull blades or bits. Keep them clean and dry and they will last, doesn't matter what brand.

[@rippinlips1133]

I use them with my concrete crew for form setting. Work great. They won’t break.

[@makinlifework9345]

That’s awesome!

[@henryserrano6510]

Excellent review, thank u

[@michaelgrimes5588]

I use them for roofing related jobs...most of the time it is small cuts, screws for gutters etc etc...no complaints

[@kimchee94112]

I have this set, its OK for weekends around the house, somehow doesn't feel right in my hands. I much prefer the Milwaukee 12V stuff, very compact and enough power for most jobs and it feels quality. Plus I could use it all day long without being tired and fatigued like using 18V heavy tools. If I need more power on occasions I bring out the 18V Milwaukee or DeWalt but usually my go to are those compact 12V tools.

[@christophermyers4965]

I just got this tool set and there not the best but for the price and the amout of tools u get. The power is perfect for homeowners diy guys u just cant beat this lil tool set imo. I love mine. They work great for my purposes

[@NGMonocrom]

Yup, Home-owner, DIYer, Handyman. Great for those individuals. Hate to say it, good choice for a Pro who needs good quality tools but shops the budget brands because he's either new to the Trade. Or, work is hard to come by for him. Unfortunate fact of reality for some. Can't blame those individuals for not investing in better built or more powerful offerings from DeWalt, Milwaukee, or Makita. Will say that everyone I know who has decided to go with Ryobi as their one brand option for power tools.... all of them swear by Ryobi. You just don't see that level of satisfaction from the other budget brands like Bauer, or Hart. With those, price seems to be their #1 selling point. Honestly, I'm seriously considering standardizing on Ryobi myself.

[@historyhawk3621]

I don't understand some comments that disparage Ryobi. They were never considered to be a heavy construction grade tool. They are DYI, project specific tools that should not be compared to DeWalt, Makita, or Milwaukee, all of which are construction grade. If you're a full-time, professional carpenter, you should know that.

[@jakeferreirafamily]

This is going to be a shocker but it’s literally the Milwaukee bag but a different color Milwaukee and Ryobi are intertwined lol

[@rogertyler3237]

I Picked Up One Of The New HP Battery With The Very Bright Yellow green Fuel Gage & I Can't Wait To Try It Out On One Of My Power tools To See How It Works & I Might Try It In My New Ryobi Bluetooth Speaker To See How Long It Last's

[@johnnycampbell3422]

Had ryobi for near 20 years for home use (only battery tools I use for personal/ family use). I think they are the best bang for the buck for a homeowner/ handy person. Figure on buying batteries every 3to4 years and tools every 10to15 years. Used many top brands on diffrent jobsites (they are better), seen a few break but not many, had to use my ryobi s a few times on jobsites (often just had them in my car), got laughed at, but got the job done.

[@willia3r]

What type of ryobi drill(s) would you recommend for a person doing home maintenance, DIY, and occasionally paid handyman work? Which driver is best, drill or impact?

[@johnnycampbell3422]

@@willia3r I would recommend the kit/ pack that has both + batteries and charger. The driver is great for driving deck/ fence screws (especially larger lag bolts). I mostly just use a drill (even for decks/ fences) due to habit. A drill is WAY more versatile and does things like "drill" the impact really doesn't. Generally buy the best tools you can. Ryobi costs 1/3 the cost of the premium brands, so, I have 10+ tools for the cost of 3, as a cost analyst it makes since for my application. Hope this helps.

[@kimchee94112]

First corner they cut on cheap tools are the batteries, Ryobi is no exception. Need new batteries every couple or so years on old cordless Ryobi tools plus I haven't had the old blue stuff lasted more than 5 years. That's not money saved. The new Ryobi stuff including batteries are pretty good for the money though.

[@johnnycampbell3422]

@@kimchee94112 sounds like my experience. I do not regret ryobi and have about 20 tools and down to 8 good batteries.

[@videoghostreviews5326]

I have a Ryobi pesticide/ herbicide fogger. I love that

[@makinlifework9345]

Cool

[@funentertainment4730]

Is really good kit better then other expensive tools I will buy soon 🥰🥰🥰

[@ronaldioia4749]

i've used their products for years.one never died on me yet.and yes i do have a hilti gun and my saws all is an old beast milwauke.

[@CookiePepper]

Maybe not the best but good performance, reliability and price. The brushless models are really good.

[@austinshoemaker1553]

I don't even know how I got to this video but its not bad.

[@DanielGomez-cf6vk]

I started with the 6 Piece and Moved on to better things now

[@lordrichard8184]

You should have the plumber friend come on and use the tools and talk about his experience with using ryobi tools professionally. I use my ryobi tools professionally and I have another ryobi set I keep at home. They’re a great value brand.

[@AlexO7O4]

Thanks this helped alot

[@makinlifework9345]

Glad it helped

[@CP-pb3pj]

I can’t speak for these tools they used for demo but I do like their pressure washers and inverter generators.

[@CAwolfguy]

I like to call Ryobi the Yamaha of tool brands....as good as a Honda, half the price.

[@CAwolfguy]

@alexander-yd3hz The motorcycles. Don't know musical instruments.

[@davidperry4013]

My dad’s Ryobi drill from 2009 still works but, one of the batteries has died permanently due to age in 2022. Very good tool for the price. I bought Milwaukee tools and the fuel is definitely worth the splurge if you want great tools instead of good tools.

[@properdukes9091]

Let’s see how those Milwaukee tools work 13 years from now.

[@bread-gz3rl]

Buy dewalt

[@ADLNC73]

Best thing is the new batteries work with the old tools as well. Go buy a new battery and keep using the drill.

[@thrash208]

You could have just bought a new battery and it would stilk be compatable with your old ryobi models. Part of the charm

[@Yata69]

This kit is an old kit that they are basicly trying to get rid of. I have 40 plus Ryobi tools that I use in commercial construction, they work great and oddly, others have asked to use my Ryobi because it does preform.

[@ofrecentvintage]

Thanks for sharing! Just got this kit as a gift last night. Would really appreciate hearing what the expert with 40 years of experience thinks about the set after taking it to the job site! I'm not sure if I should keep it or return. I've been reading/watching reviews and I'm concerned about performance & longevity.

[@makinlifework9345]

An update on these tools will be released within the next week so hopefully you subscribed and hit that notification bell.

[@johnnycampbell3422]

Hope you used them and do an update.

[@SuperSushiRoll]

These are all the brushed version of the tool. You should give their brushless variants a try. They're much better.

[@sierra659]

Perfect for diy guys or light contractors

[@scottfabre239]

I have probably about 75 percent of the tools Ryobi sells, so far so good, my biggest complaint is the batteries. If you only occasionally use the tools, you have to stay on top of the batteries. For example if you have a battery sit too long with a low charge is can very easily fail when you do try to charge it. I have had a handful of my batteries fail and needless to say they can get expensive I have a few dewalt tools some over ten years old, and I still have the original batteries. Ryobi should do the same thing Dewalt does, of course batteries are the money maker for ryobi. I also have a bunch of the Ryobi 40V tools. But even with the frustration with the batteries, and still like my Ryobi products!

[@bobbystewart2605]

Question, Wht is the proper use for the oscillating tool?

[@deegenovese3558]

This ryobi kit was my starting kit. They get the job done but give out after 5 months...I was able to save enough money to upgrade to the Milwaukee set and it's all I buy now.

[@pjaxy]

Ryobi has a three year warranty

[@Scotty_in_Ohio]

Probably the most common complaint I've seen out here on the 'ole interwebs about Ryobi tools is for their circular saw or their older table saw - accuracy out of the box and even with some adjustment is not good. I have an old blue color Ryobi circ saw and it's good for what it does (cross cut 2x4's and occasionally rip some plywood / OSB) - would I trust it to build furniture? Nope but with a decent blade and a fresh battery you can get some projects done. Like so many homeowners you're somewhat "trapped" by the Ryobi system because they do offer a lot of tool and gadget choices and if there's something you are looking to buy if they don't offer it they likely will shortly so if you've bought a few batteries and a mess of tools you're pretty much "locked in" - for a pro they might change brands after a couple of years because they wear out the tools and really have to depend on them for a living. The garage door opener (I have two) was great until they were sued by another manufacturer over their battery backup and modular design - after that the app really didn't work and the model that came out afterwards was wireless for the inside remote and had issues (though mine seems to work fine). I don't even think they still sell the garage door openers anymore.

[@sonictech1000]

I'm surprised you liked the circular saw. I bought the brushless version a while back and disliked it enough to return it. Power wasn't a problem but everything else about it felt really cheap. I have a bunch of older Ryobi stuff that I like so I was surprised. I ended up getting a Makita on sale for about the same price (accounting for the batteries) and it's soo much better.

[@Scotty_in_Ohio]

I'm no "pro" here either but I've been using the "One Plus" stuff for well over a decade (most of my tools are brushed) - as each of these tools either die or I just get a wild hair I'm replacing them with Brushless HP - I'd gladly pay the full $300 for brushless version but I think there would be a higher price even above the full retail money. The batteries for both the 18v and 40v are fairly inexpensive and seem to last if you take care of them - they carry a 3 year warranty so if you have one that's not taking a charge or doesn't last that long - get it replaced while it's still covered. I probably have about 8 4Ah batteries (18v) and about 10 or 12 1.5 or 2.0Ah - I've had only two of my original smaller batteries die and they were purchased about 8 years ago so I can't complain too much. The 40v stuff is pretty good though I've had the 5Ah 40v that came with my mower bought in 2017 just die but it was very heavily used in everything from blowers to trimers to hedge trimmers. As others have said the fans (battery and hybrid) are great - the work/trouble lights are good too.

[@MrYoungj2009]

Old man: 40 years construction experience Son: tech/computer guy that knows nothing about tools lol

[@makinlifework9345]

Thanks for telling us about you and your dad 😂

[@Macatho]

Pretty sure a tech/computer guy don't know about the hammer function on a driver. Maybe Ryobi should tense up the spring holding the hammer or change the slope on it.

[@Yata69]

I own at least 40 Ryobi tools, toss the bits out of the box!!!!! Great tools, trash bits!

[@Antattack22]

Found that out hard way they sucked big time

[@josecortes9799]

In my experience in life, when someone says not bad it usually means not good. I use some of these tools, so I know what I'm talking about. Thanks guys.

[@thrash208]

Usually means not great but not god awful. Ryobi is good for little home projects maybe at most a deck but i wouldnt use it to build a house Or a constuction site.

[@firstlast7090]

Its not a bad video.

[@chingonmalo6291]

Ryobi also makes these tools for the japanese maket which ryobiis originally from in japan under ryobi Ltd. The tools are expensive and high end just like the Panasonic tools makita japan also different. High end tools too expensive for the us market

[@cahg3871]

I started last year with Ryobi when I renovated my house.The oscillating and reciprocating saws both only lasted less then a few months/uses before literally burning up in my hands.The circular saw was only good for short durations or half inch plywood but drained the battery quickly.Maybe this years versions are better,but the tools I bought were cheap,but not effective.Remember the old adage,you get what you pay for.

[@pjaxy]

Ryobi has a three year warranty

[@greylynnjr]

Use 4v battery

[@arnellwyatt114]

Ryobi is not what you would do a full house renovation I would think

[@johnbonson2658]

The circular saw that I have is more than enough for DYI projects. Cuts 2x4 with no problem, believe it can cross cut even 4 x 4 with no much impact on HP 4ah batteries. Built a couple of garage shelvings with it and it barely used 1/4 of the battery. The batteries are relatively cheap and recharge quickly. So, I don't have any issues with it. I one thing that I did after buying it, replaced the stock blade by Diablo.

[@bread-gz3rl]

@working_country ___ just call ryobi themselves and they send you a new one

[@thebuff7271]

I have the 5 1/2" circular saw..i use the heck out of it..

[@willia3r]

I heard the Ryobi Circular saws don’t really last long and are not rugged. Do you agree, or no?

[@bread-gz3rl]

@@willia3r the cheap ones belong in the bin but the HP tools are pretty good

[@kevinohara8671]

Iv got the complete kit just about there brilliant but dont ask them to do industrial work have respect and they will last and last to a good standard

[@SolarizeYourLife]

The only problem with any battery operated products is how old and how long since it was charged in the box, how long was it sitting on the shelves... I rather see the tools and batteries sold separately...

[@davedaniels8211]

My work colleague has Ryobi, I use Dewalt. He wants value for money, as do I, but Ryobi just feels 'cheaper'. He wonders why I'd spend £200 on a drill. He spends £60 but replaces it every year. I like Ryobi garden tools though.

[@makinlifework9345]

Longevity of the tool is definitely something to consider. Appreciate your comment.

[@lrac_1]

Surprised that one user hasn’t added “they have 3 year warranty “

[@bread-gz3rl]

@@lrac_1 in the UK if it's used professionally it's like a 3 week warranty or some dumb shit

[@rickadrian2675]

I have quite a few Ryobi tools for the garage and garden and have never bought a combo pack as they always put the crappiest models in them. Dewalt do the same.

[@acecaldwell4701]

I wonder if they realize the lack of power is because it's only a 5 an a half in circ ? Normal are 7 an a quarter

[@spudm4000]

Any HP models in the kit

[@makinlifework9345]

Not this one.

[@XellosMetallium]

sees ryobi tool "its not too bad" tti makes both ryobi and milwaukee tools

[@Tundra_Guy]

How have these held up?

[@makinlifework9345]

No issues as of yet but they have not seen a ton of use either. Still need more time to make a judgement on durability. We may do a 1 year later review. @tundra guy would you be using these tools for homeowner DIY use?

[@Tundra_Guy]

@@makinlifework9345 Yes, DIY use.

[@armyfazer1410]

@@makinlifework9345 Some of my Ryobi's go back to the blue tools. The rubber surfaces have worn off, but the tools are still chugging along. It was mostly light DYI and now I am rehabbing houses.

[@sealtechblades]

Ryobi makes good tools. But when you finally break down and drop the $$$ to get into their brushless line of tools, you WILL be pleasantly surprised at how well they perform!!!

[@AlexanderRodriguez-vs3xk]

Do the brushed tools spark ?

[@sealtechblades]

@@AlexanderRodriguez-vs3xk no more than any other tool does.

[@glenarseneau1231]

I’m a plumber I would in my opinion never use those tools on my job sites, will they work sure but my Milwaukee will do the job faster and more efficient any day of the week

[@makinlifework9345]

@glen arseneau Milwaukee is superior to Ryobi no doubt.

[@bread-gz3rl]

Brushless ryobi will do it and Milwaukee needs to stop thinking they sell gold. Kill 2 brushless ryobis and slowly move to dewalt.

[@94SexyStang]

Good DYI, or light contractor work, but no one is running Ryobi for SERIOUS work, let's cut the bullshit, LOL.

[@mehst4129]

Aren’t all the one plus tools brushless?

[@makinlifework9345]

Only the HP line. These are not those. Thanks for watching and commenting.

[@mikearmbruster2171]

1+ just means they all will work with same battery Different brands just phrase it different

[@charlesjackson1588]

All the tools in that combo set are pretty weak tools. Doubt they'll last long on the jobsite. The hp and brushless ryobi tools are much better value although they are getting fairly expensive too

[@levro7367]

Love it when people talk about a subject they have no idea about I've seen an old beaten blue Ryobi drill still be used as an apprentice chuck away tool still going strong

[@michaelschroder6071]

Those are actually worse. Plethora of videos here on KZbin on them. Literal dumpster fire.

[@bread-gz3rl]

@@michaelschroder6071 my stepdads brushed drill shit the gears out, sawzall died (we did absolutely kick the shit outta it tho) the impact is fine but kinda weak sometimes. Meanwhile my HP tools have put up with litteraly being incased in mud (one of the 2.0s didn't) and the drill will probably last 10 years.

[@keithlaub2178]

I wish the experienced gentleman would have done the review.

[@videoghostreviews5326]

Are they brushless? If not then no deal

[@makinlifework9345]

These particular tools are not brushless

[@willia3r]

What is the difference between a brushless drill versus impact and drill drivers?🤔

[@bread-gz3rl]

@@willia3r what

[@u-shanks4915]

It depresses me that people steal tools instead of just buying ryobi Their cheap and the color is anti thief in itself.

[@DarndestHustlers]

“Not bad not bad not bad not bad”. I mean I agree but come on gimme some depth haha

[@slim1260]

Comparing Ryobi to craftsman or porter cable is just disrespectful. You should be comparing it to FESTool Bosch Dewalt Hilti Makita Metabo Milwaukee Ridgid Ronix Etc.

[@willia3r]

What is so unique about craftsman and porter cable?🤔

[@armyfazer1410]

I hated my Ryobi multi tool until I bought better blades. The factory blade is a waste of metal.

[@makinlifework9345]

Good blades definitely help. Thanks for watching and commenting.

[@mikearmbruster2171]

Most blades that come with some tools are.

[@mikearmbruster2171]

Some of the blades are just stamped pieces of metal and suck Never had problem with any of my or the girlfriends ryobi Had the same 18 volt battery platform for around 20 year

[@ddeg2356]

Can you please consider buying a microphone. I bet you'll get more subscribers

[@makinlifework9345]

👍

[@robertlee4172]

Billable hours on a set of discount DIY tools? Gotta look for the value for the dollar. The market is flooded with competitively priced power tools. Ryobi at 2/3 the price, but quite capable on the job site. Or, look at it this way...$199.00 for that many tools? You won't find that price on Makitas or DeWalts. The invoice is in the mail, why would your customer care what tools you used to complete the job?

[@mikeleduc683]

real world test

[@Macatho]

I don't get how these tools are so freaking cheap on Homedepot but here in Sweden they're all about twice as expensive if not three times... #annoyedSwede

[@willia3r]

Maybe it has something to do with the price of importing them(tariffs/taxes) and/or if they are manufactured inside 🇸🇪Sweden or not🤔

[@ThePete2432]

If I saw a guy with a ryobi tool on my job site, I’d send his ass home

[@arnolddavies6734]

Tool snob

[@bread-gz3rl]

If it gets It done what's the problem. Sure if they show up with the 1.5AH bullshit and the cheap drill but the brushless stuff has basically replaced ridgid

[@ProToolsApproved]

.....not bad. ....yeah, it's not bad, not too bad.....not bad. Yeah not bad. It's light, feels good in my hand. It's not bad. Yeah not too bad.....that came with it isn't too good....it ain't no good. Not too bad. Not too bad. Yeah not bad. It's not bad, not too bad. Too bad too bad bad bad bad bad bad badbadbafbadbababababababba ba bah bah bah ha ha HA BAH HAHAHAHAHAHAAHA... Not bad

[@arnellwyatt114]

Alot of video and no straight forward answer to the question. SMH

[@riversider681]

First thing the old man said is that the truth will come out when he takes them to the jobsite. But this vid never showed that and never heard from the old man on how they performed at the jobsite. Only saw a little bit of dinkin' around the back yard with a VERY light workout. So this vid fails

[@BSDOWNZ]

Can’t believe you guys destroyed about 6 billion dollars worth of wood for a review video

[@makinlifework9345]

This was filmed prior to the lumber price surges and these were scraps.

[@jeffleake1960]

I hate it when they put cheap crappy flash lights in the kit to bump the number of included items up on the box

[@greylynnjr]

The drills now suck. I had an older impact that was more powerful. Now, the trigger has a delayed response, and the power is down

[@NoName-zz8nl]

You call tools, pieces 🤣 I call my kids things

[@thee_undertaker]

I love the old man give him his own channel. Just listen to him he's smarter than you

[@alfhoa7199]

GET TO THE POINT!

[@hydroaegis6658]

I wonder if Ryobi's lime green is a defense mechanism against theft? Too ugly to steal and no real resell value.

[@charlesross6112]

Regretting Your Obsolete Bad Investment

[@GaryNewsom1]

Worthless crap. Buy cheap...buy twice.

[@willia3r]

What is better and/or the best in your opinion?

[@trebest52]

@@willia3r im in the market for a tool platform atm. Its weird,and like anything else in this world EVERYONE has a different opinion! The Dewalt user”dont buy that its crap get dewalt “ the Milwaukee user “dont buy that its crap get Milwaukee “ same with phones!! You havr iphone fans and android fans… I’ve narrowed my search down to ryobi and or rigid with makita in the far 3rd. I want a platform that many battery powered tools readily accessible for a decent price.

[@willia3r]

@@trebest52 ok im confused your first comment seem to suggest that Ryobi is cheap crap, but then your second comment says that you are considering Ryobi along with 2 other brands. Is Ryobi still a brand that you prefer?🤔

[@trebest52]

@@willia3r sorry about that man I was insinuating that depending on the brand that folks typically go with that’s the one that they are loyal to and everything else as far as brands sucks. me personally I’m just looking for the best bang for my buck and it seems to be Ryobi. I still have not pulled the trigger yet! Seems like a great time ,considering right now is Ryobi days

[@johnmerica7203]

Hi, which one do you think is better the Milwaukee 12v 5 piece Combo kit which is also $199 or this Ryobi Kit would really appreciate your help

[@bread-gz3rl]

I'd buy the brushless ryobi stuff or dewalt 12v

[@ncexnyc4466]

As a homeowner who is only going to use a specific tool 2-3 times a year it's hard to beat the Ryobi kits.