S&W SD9 VE Tabletop Review

www.ammoland.c...
The SD9 VE is an affordable option from Smith & Wesson.
www.smith-wess...
See our full shows on CarbonTV! mbsy.co/hGzf2?u...
Support this channel with some swag at www.cafepress.com/GBGunsMerch

[@Tully3674]

4+ years later and this is about the best review I've seen of ANY firearm (I don't own an SD9VE but I see its now worth consideration for additional home defense). Methodical, concise, objective and his verbiage makes both an experienced and beginner better informed. I'm now a subscriber.

[@GBGuns]

Thank you and welcome to GBGuns. You can expect all tabletop videos to roughly follow the format of this one. Our Shooting Impressions videos have evolved over the years, but are also formatted.

[@ExplicitBoricua101]

You will not go wrong with!

[@bxcongero1]

I have this gun, and believe it or not, it's my everyday carry, I have a Sig P320, Glock 19, just got a Ruger American in 9mm. I haven't changed the trigger on it, it's well broken in and after 1500 rounds it shoots like a champ, I have no accuracy issues, always center mass, groupings could be better of course but the gun works. I have a Blackhawk Serpa Holster for it, outside the waistband, winter, spring summer fall, and I open carry. I'm not trying to advertise, I'm just comfortable carrying it that way. I like this gun, it just works. I wanted to put the apex trigger in it but I've become accustomed to the trigger, i don't mind the heavy pull. At this point it only feels like its about 7 and a half pounds, I could be wrong but it doesn't bother me one bit. Mags can be expensive for it, but if you search, some places have deals on the sometimes, I got 6 recently for 70 bucks. All in all a great value.

[@bobbyjames1714]

Torin Rodriguez The Apex trigger brings it to a whole new level. I didn't realize how crappy the hinged trigger was until I tried a Apex. If you have a m&p or SD, get a Apex trigger, it's the best upgrade for the Smith's. I have two m&p's and a sd9ve, all of them have thier triggers.

[@MrsJackie2011]

I just bought one mag for 40.00. Where did you find such a great deal?

[@shadowwolf7622]

My local Rural King here in Indiana sells 16 round factory mags for $28. I'm impressed with this gun also. U got the SD9 with black slide and FDE frame on sale for $279. I carry mine in the SERPPA holster too. Just picked up a Uncle Mike hip holster with the mag pouch on the front to use when I want to carry an extra mag. I also like the factory trigger. I believe it is way over bitched about.

[@littlebittathisnthatfirear8048]

I carry mine too.

[@BS-mg8mh]

So stupid

[@Eman1900O]

this is my first pistol. even my 5'2" gf and her sister who have zero gun experience both shot this gun impressively accurately from the start. it runs flawlessly

[@damiion666]

Yipyo1986 Are they hot?

[@ra-on6gn]

@@damiion666 yessum

[@wiccanconservative]

I am so late to this party but also very excited my homework paid off. I just bought this gun today and can't wait to see it live up to it's reputation. Thank you for the video!

[@wantedfelons]

Wiccan Conservative MAKE A VIDEO!

[@wiccanconservative]

@@wantedfelons kzbin.info/www/bejne/sJqcYaVrYrace8U It was my first time. 😊

[@acesotatted8367]

Wiccan Conservative same I put 4 rounds out of it so far works great

[@wiccanconservative]

@@acesotatted8367 I really didnt want to stop, but in my head "must conserve ammo, must conserve ammo" 😂👍

[@6footpenguin209]

Just got one yesterday. Satisfied. Sexy too

[@nanroses2137]

These are excellent value guns. You really get more that what you pay for with these. Slightly lighter than a full size M&P they are a great EDC. I bought mine in 2012 and still carry it.

[@gunslinger2172]

I got mine aprox 2 yrs ago when our local Gander Mt store went out of bussiness I got mine for 175 as a professional gunsmith I can and did some tricks thanks shakes hands with you

[@tabking3775]

Nan Roses that makes me happy as I just purchased this today first time as my first gun. Can’t wait to try it out in the range

[@thepistolguy859]

I dunno I think all guns no matter brand should not cost anymore than 450 dollars

[@hmiranda71]

2000 rounds so far in my SD9 no issues even with the polymer guide rod ,still strong and reliable.

[@arlenleffmann4966]

I've had this gun for a year or so and I like it completely stock. It's super reliable. Great gun for 300 bucks.

[@Reloadingfromthehotpot]

I have this pistol, I put the Apex trigger and spring kit in it and WOW what a nice reliable gun it is. I put a light on it and I keep it buy my bedside. Good review

[@catlubber9464]

You just described my situation. It's my bedside gun. with the Apex set-up, it's been an accurate, dependable, and very shootable gun. No complaints.

[@elbob17]

I've got the M&P and love it but who doesn't want more? I woke up this morning super early and started surfing the web on my phone and 30 minutes later I had purchased the SD9 VE. Affordable and I've always been comfortable with S&W.

[@barcelona2170]

This is a great gun. I have nothing but good things to say. Going to get a Glock but have no plans of getting rid of my SD9

[@IBTJn]

I have one, too. I dropped in an Apex trigger, Galloway trigger spring set, extended take down lever, 21 lb SS recoil spring & rod, grip tape, and TruGlo sights. It's now one of my favorite shooters out of my small collection. For folks on a tight budget it's a very good option as they can do simple & affordable upgrades a little at a time while still enjoying it if they want. OEM trigger bites but sort of good for new shooters which is why S&W went that route (or so they claim). Mags go on sale sometimes too for as little as $12-$15 ea (I have 6 for mine)...and good quality mags. A very affordable and fun pistol to learn working on & shooting.

[@Deviate09]

I just picked one of these up as my first handgun and I was looking into the spring kits. I can't find one that's made by Galloway though I'm going to keep trying, but S&W apparently says replacing the polymer guide rod with a steel one tends to blow out the frame. Have you noticed any wear on yours? I would love to start doing upgrades on mine but I don't even know where to begin!

[@GBGuns]

If this is your first handgun don't worry about buying accessories people talk about. Learn the gun as it comes first and decide if you even want to change anything, that way you know if it made a difference or not

[@dldixon8781]

I'm really shocked this gun doesn't have better recognition than it does. This is a great gun over all. The gun is a beast, eats ammo, spits it out, and hungry for more.

[@nightstaber2010]

I’ve had one for 3 years now, my first gun was a 380 high point, definitely an upgrade and yes for the cost you can’t go wrong with the VE. No accuracy issues with the VE, love the way it slides, I bought my wife a Taurus, we went to the range when she heard the slide of the VE she was immediately jealous. Good gun for the price.

[@funkyfreddurst]

It's September 2020 Hard to find even harder for ammo, close to $380 but still worth it! Great gun!

[@omzizo715]

Got mine today for 399

[@PHALANX5]

2021 the ammo is still more expensive than it usually is and the boxes are scarce in stores.

[@boss94ways51]

@@PHALANX5 iv been going to academy sports on their load days and getting ammo every week and they selling it at regular price 2 box limit but hey its in stock in store only

[@boss94ways51]

I got lucky i got my sv9ve in February 2020 a week b4 the covid scare for $262 with shipping

[@justinv3080]

Tons of gun for the money!

[@OfficialMarkieB]

My buddy has had one for years and it made me make my S&W move.

[@hmiranda71]

I was unable to get a Glock because the price so i got that one for $299 and it been extremely reliable and it disassembled just like a Glock.

[@tabking3775]

Just bought this gun, first gun ever owned. After hearing about the sigma I felt upset at the purchase but then I realized that I had purchase a SD9 and watching a lot of video for the price I paid ($299) it is the best thing for your buck. I didn’t wanna spend $500 on my first gun, but I got this today and so far all reviews are good for what it does which is having it for self defense. Can’t wait to try it at the range

[@GBGuns]

Welcome to ownership!

[@ra-on6gn]

Literally same exact scenario here bro. Just bought it 2 days ago! Congrats man

[@tabking3775]

ra I just took it to the range last week. It’s nice deff with the money. I would deff like to get another 2 magazines

[@arsenioharris827]

Lol i paid 400 for mines about week ago

[@ded1645]

My dad has always been an old school revolver guy. He started speaking about getting a 9mm after shooting various ones I own. So found them in my usual gun shop and bought it for him. Shot well from the get go with all types of ammo. Various weights, steel and brass functioned well. A couple light primer hits but nothing to freak out about. This one shot slightly low. Filed down front sight to just about the top of the white dot and shot point of aim after that. The only significant issue was after about 500 +/- rounds taking it apart for cleaning the plastic head of the guide rod snapped off. Found a cheap steel one online and the gun has functioned extremely well since especially for the cost.

[@shadowwolf7622]

Which end snapped off? Mine seem to show wear fast. Smith told me not to use a metal rod. They said it would damage the frame. They did send me 2 New rods to replace the ones I sent them to examine. They said they all wear and not to worry about it.

[@ravioli2389]

We need a SD45VE, double stack 15rd......that would be lovely and S&W should keep it in the same price range $250 - $300.....i emailed S&W asking them to make it.....they replied back with a " we'll look into it Sir, thank you "......i also mentioned a SD380VE double stack 10rd or 12rd...... these two firearms would be a nice addition to the SDVE lineup !!!

[@mickbowling4412]

I used to own one but sold it. Not a bad gun by any means, but you can definitely tell it’s a budget gun. The trigger, the shiny cheap plastic frame, the flashing around the seams, the thinly stamped sheet metal slide release, etc. Nothing that effects the function of the gun, just some things I didn’t care for quality wise. I will say that for someone on a budget that just wants some self protection at a good price, it’s a good choice. However, if you look around hard enough, you can find better at around the same price. I bought an M&P 2.0 Compact for $299 from Sportsman’s Outdoor Superstore.

[@keithreh9338]

August 2020...new ones are $400 (honest pricing) to $500 (ripoff pricing); snagged a clean used one (2015 vintage) for $250 w/ original mags & 1 extra mag (sigma floorplate); added another mag for $33 (honest pricing); this will be my 4th one (traded or sold my prior ones); my accuracy with it is average with the stock trigger pull; it will fill a role as a home defense firearm with limited open carry during rallies/gatherings...

[@dariuswatkins1651]

So you saying this gun is 400$ Now.?

[@dariuswatkins1651]

Damn I'm Glad I Live In Texas 😂 but that's alot so a Glock like 600 Sum.?

[@thomasb1722]

Buying one as my first gun at 25 years of age. Been a few years since I was shooting but I've wanted a handgun for about 5 years now, just had to wait for the right time. I looked at everything in the store and was just drawn to the SD9VE. I picked it and it picked me. It's gonna be about 475 total with tax but I put down 100 and put it on layaway for myself. Don't think I'll be disappointed in any way. Beautiful handgun

[@denniswilson4889]

Put Apex trigger and spring kit in mine. Also extended takedown latch, stainless guide rod. Also put a Galloway sear spring in it. It's a different gun. And I bought it with these mods in mind, as I wanted to start working on my guns, after 20+ years in Law Enforcement.

[@MrWayneploof]

I have had my SD-9 for a few years now and have put a couple thousand rounds though it and never once did i have any kind of problem just runs 100% great gun for the money

[@richki.24]

I love me my SD9VE, have well over 1,000+ rounds, have never had any fails, 0 Fails to date, just dumped another 50 shots thru it last week, 9/5/2018 ... they run about $269 New in my area, Phila., PA ...

[@hmiranda71]

This gun it's excellent for a budget people like myself, Its extremely reliable i had no failures whatsoever i will never sell it I recommended 100%.

[@hartsickdisciple]

Of all the guns on the market, this is probably the most Glock-like. These are very solid guns, especially for the price. The stock trigger kind of sucks, but the Apex kit is affordable and fairly easy to install.

[@smorfnimda]

They raised the price. They are over 350.00 now!

[@DD-zp3qe]

Yea man, i just picked one up for $415. With everything going on nowadays, inventory is low and prices have been marked way up. I felt lucky, since shops around me are selling this for upwards of $699, and glock 17 and 19 for $1000! 😣

[@mfmayes]

i have the older one the sw9ve, and it is still going strong. very happy with it

[@mayorofthecity3148]

Smith and Wesson don't make bad guns period in my eye they in the line up with the top of the top gun makers Smith and Wesson is a very known reliable firearm arm people speak on the sd9ve sometimes as if it's a hi point a something, this gun the shit, flat out

[@zombiekrazybabesissyprice2358]

how much

[@rubykaufman5361]

Although it's just cosmetic I see this one has a warped dust cover at the end around the slide and the frame. I have noticed that a bunch of these are that way! They should let the frame cool more before taking them out of the mold, i think that's what causes this warping and makes it sit to one side like that, it doesn't hurt anything but it looks cheap and crappy!

[@brolife420]

Sd9 be was my first hand gun and I love it. Took a a few rounds to figure it but once I did I felt great.

[@RafaelGarcia-jk4bz]

I love mine!!! Accurate and 100% reliable.

[@DannyCasino]

I just picked one up at my local gun shop used for $185 I go and pick it up Monday look forward to testing it out

[@baksa6171]

Region 1 Resistance read!!!!!

[@DrummerJake-cm5ir]

I bought one the other day from academy for 299, it was around 327 after tax, i really like the gun, amazing gun especially for the price,great accuracy, no feeding or jamming problems what so ever, light and good quality, and nice looking as well

[@garbageman1983]

What state do you live in?

[@GB-zi6qr]

Sorry to necromance a 6 year old video, but it is relevant to the subject at hand and recently I've found these back down under $400. Nice review GB.

[@GBGuns]

Haha, no worries. Over 1,300 videos in our library so it was bound to happen. Yes, S&W nearly doubled the price during the panick buys, but seems to slowly be returning this to the 250 range where it was.

[@GB-zi6qr]

@@GBGuns I was in a pawn shop and a SD40VE was priced @ $400 used. The clerk asked me if I wanted it, to which I replied "Not at that price."

[@jennylozoya6053]

Just bought one today while on at lunch from work..add to my collection

[@rizi3pheezi]

Thanks for the Vid. Just bought one today!

[@tabking3775]

RICH ARAIZ I just bought one today! First time, how do you like it now 8 months later?

[@meltoncul]

Did the military consider this pistol when choosing the Sig? It appears to be a great gun, American made and may have fewer problems then those being experienced by the Sig... Just curious. I mostly go with Walthers, but this gun seems to have it all and field strips easily like the Walthers and Glocks.

[@dannyrobbins5096]

I did a cerakote job on one of these this week. It was brand new out of the box. Not sure if it was just that particular gun but I was able to remove and replace the rear sights with my thumb and not a lot of pressure. Just something to consider when thinking about upgrades or how you store it.

[@SuperEvilC]

Excellent underrated handgun... My EDC love it more than my G19. Btw I have the SD9 black slide w/dark grey lower.

[@96stealth]

We own one of these and it’s a great gun for the money. At one time it was probably the best gun for the money, but I think the Creed and Canik tp9v2 are both better guns. Although they cost about $50 more on average. I agree with you on the trigger pull. Just needs a shorter reset. Surprisingly the softest shooting gun I’ve ever shot with the exception of the Steyr M9. Looking forward to the range review!

[@stevesnvegas9040]

I agree. He did emphasize American gun, but I would pick the Creed over this all day, especially when they are going for $269-$279 all the time.

[@outlawgt3045]

That pistol looks amazing.. Wished I bought one over my Ruger.. Ive always been a S&W guy...

[@jennylozoya6053]

I have a RUGER 9mm- 9E....and just bought this today...SW. 9MM..I WILL COMPARE

[@Thundarr995]

No,the Ruger is better. You're Ruger probably has a rear adjustable sight.a heavier barrel so you can use +p or +p+ ammunition. And its probably a better quality gun. I have a SR9 & one of these SD9VE's. And the Ruger has a better trigger. After I bought the Ruger I hardly ever use this one. This is the gun I let my friends who don't have guns use.

[@Thundarr995]

Not to mention that this gun has a loose rattle to it. I don't think it's a peice of crap. I think for about the same amount of money,you can get quite a bit better gun. It is reliable I've never had any problems with it. Mine seems to shoot low & to the left. My Buddy has the same gun,he bought it at the same time I bought mine. His seems to shoot high,higher tha mine does.It is what it is. It does the job. Would I buy it again...?probably not. It's got a lifetime warranty. If you start throwing aftermarket parts on it trying to make it better,it voids the warranty. Might as well just buy a more expensive gun to begin with if you're gonna do that.

[@jamesschneider2091]

Picking mine up at the FFL later today. Effective review video for orientation. Look forward to handloading the cartridge and having some fun. Hope I never need the SD part - but that's why I bought it.

[@lcombs1702]

Just picked this one up today! Been looking for this model for a few months and this was the last one they had so I’m pretty excited

[@GBGuns]

Congrats!

[@jessiejane6259]

$250? Now in 2021, $400 is considered fair price for SD9VE

[@GBGuns]

Yup, looks like S&W got greedy.

[@TUKByV]

That's what I paid last year. Prices have dropped a little since then, but not much.

[@markio2010]

Good freaking job man. You really have superior use of the English language than most.

[@GBGuns]

Thank you. I write for a living

[@ricmeyers1340]

I love mine, but it's an SD9, not the SD9VE. I polished the feed ramp and she runs great! I'm waiting for a trigger from Apex. We'll see how that improves it. For the money, great gun!

[@Ubermentsh]

My personal choice for open carry is a Smith & Wesson M&P compact 2.0 40 caliber. And a M&P Shield 9 for concealed carry. Smith & Wesson SD40. And the Taurus g2c. Both are great budget alternatives. To my M&Ps. 👍

[@TheTexan99]

Honestly blazer brass is the most reliable & consistent

[@ihatefords1000]

Lol

[@jamesbroughton7870]

Trigger pull is important for us older folks that have bad arthritis in our hands. It’s critical for me. I will not buy a gun that I cannot do a trigger job on if the pull is over 6 pounds.

[@andymullarx6365]

Best budget 9mm that I'm aware of.

[@dhl9789]

I owned this for a time great gun If you don't like the trigger pull you can add a Apex trigger makes a big difference

[@jeramywegner1649]

My name is j I live in Springfield Oregon I recently purchased one of these nine it is an excellent gun for the value very very reliable has never jammed on me yet

[@jdsimz8147]

I own the previous model that got sued by glock. Great gun

[@JoshuaDMaley]

Great review. Just picked one of these up today. Seems like it was a pretty solid choice.

[@ditch7471]

Nice review! I just did a review as well, feel free to check it out! Not as nice as yours, but what can I say. I just bought the SD9 last week and am in it 220 rounds so far. It looks good, feels good, and shoots good. I learned the trigger real quick and in a strange sort of way kind of like it with no plans on changing the trigger or springs. Very reliable, trustworthy self defense gun in my opinion.

[@Jimbo-702]

The clip actually sits firm in the mag well when the clip is loaded

[@mikebachert8171]

I love this gun for the money,i will get a second one , brake it in ,then do the apex trigger kit, more guns ,less money.

[@Badass_Rooster]

I have one. I have to say for the price point it a hell of a gun. I purchased it as a truck gun. I have about 800 rounds through it. I have never had a malfunction with nor have I found ammo it won’t shot. No the trigger ain’t great but if that gun out my days fixing to get real Shitty . At that point trigger don’t matter

[@shadowwolf7622]

I got a SD 9 FDE frame model for $279 a month ago at my local rural king. I put 50 rounds of mixed bullet styles and weights though it a couple weeks ago. It shot great and I was hitting dead on with it. I did notice when I cleaned it afterwards that the guide rod end that goes against the barrel lug already has a decent ding in it. You guys think this is normal wear? I'm not sure what I think about it. I put a New factory rod and spring in it. I ordered two extra for it from smith right after I bought it. I had heard they wore kinda fast sometimes. But damn, it should last more than 50 rounds. I have not had a chance to shoot it yet with the New one to see how it does. Its not a horrible spot but is noticeable. I might call a Smith and see what they have to say.

[@advancedsurvivaltactix]

I like my SD9 so much I bought another one so I can duel wield lol

[@danielkofman4592]

I cant figure out how to field strip mine. The slide just doesn't want to come off.

[@GBGuns]

Have you followed the steps we show in the video?

[@danielkofman4592]

@@GBGuns Yeah its a horrible design.

[@ExplicitBoricua101]

NDZ Performace sells an “extended slide lock lever” makes it a whole lot easier.

[@danielkofman4592]

@@ExplicitBoricua101 Thank you! Ill go ahead and buy one, had no idea those existed haha

[@JWbabyshark]

I like how the barrel locks up on the locking block with that little divot. Why is barrel locked up better on the cheaper guns than the M&P?

[@saleemanwar3964]

very nice gun

[@tysonschrepel]

This is a great gun to shoot. It always seems to go to the range while all my other guns get rotated.

[@TheJay1976]

Just picked up mine it's nice

[@jayman1338]

This gun is seriously reliable

[@mehrangerami187]

Nice Demo. Thank you. Happy Holidays.

[@J3ball11]

2:50 come on man dont point at me !

[@maxsharpe2194]

I've seen this gun on The First 48 at least three times.

[@acesotatted8367]

Austin Wilkins 😂

[@princeperril000]

😆😆😆

[@MrCed318]

I paid $390 for the 1 I have the 1st of the month my apex trigger kit has arrived but I want to shoot a couple 100 rds before I change it out. But yes I'm in love with it

[@truthtone58]

that's the old sigma, I have one and would use it for everyday carry if I had to. It will work on a glock as well.

[@GBGuns]

This is an old video. What's changed with the newer guns?

[@paulsorden]

To me it was a must for a upgrade trigger and spring. I hated the trigger pull stock

[@frankvandornis4373]

I have the 40 cal. and I really like it. It fits my hand just right. The only draw back is not with the pistol its self, but the lack of night sights for it. They have them for the SD but not the SD/VE !? It's a very pleasant straight shooting pistol.

[@tysonschrepel]

I believe they are the same as M&Ps. I know the rear fits an M&P sight.

[@frankvandornis4373]

they aren't the same, I've already tried the m/p sights, they don't shoot to point of aim. Too bad because this is an excellent pistol and deserves more attention.

[@todddurst8895]

The m&p sights work on the sd9ve i put tru glo sights on mine

[@todddurst53]

M&P night sights fit the sd9ve

[@RooSerena]

I actually regret selling my SD9VE should have kept that pistol it was just a nice pistol for the price

[@mywifehatesguns]

CDNN $269.00

[@mikehartung1627]

@@mywifehatesguns $399.00 @ Cabela's!

[@mywifehatesguns]

@@mikehartung1627 $269.99 at CDNN

[@FDFANATIC541]

bought used for 240 over a new Ruger security 9 for 300 I was looking at. The rear sight is tweaked on the left side ,maybe the factory will fix it for free or I'll just upgrade...other than that, I love it

[@JanYi2023]

My daily carry, while the more expensive stay home.

[@bhardwaajmohabir9147]

Very nice thank you for showing it on you tube have a good night 🙂

[@mozzberg590]

If your in a gunfight and there is a lull, the last thing I'm going is looking at witness holes in the magazine.

[@GBGuns]

Yes, but fortunately they put witness windows on the mags in the right spot.

[@dirtyhorse5090]

You must mean lull-la-by 💀💤

[@TheTexan99]

Blazer brass is the best 💯

[@ihatefords1000]

Lol

[@BigFishLittleLake]

Polish the gun and she actually looks really good

[@CursedSamurai6624]

Is there a way to swap that 8lbs trigger pull to a more standard 5lb or less ?

[@rickyramirez3483]

Cheap nice gun! I own a SD40VE and I have no problems...kindda’ light due to cheap polymer but for the money?

[@mic187x2]

+GrahamBaates What rank did Freya achieve at Frontsight?

[@williamvan909]

do they make them in a left hand too or not ???

[@TheRealCatoSicarius]

Good review man, I sometimes have trouble finding reviews that are detailed passed "it shoots good"

[@GBGuns]

Thank you. My reviews are split between tabletops like this and shooting impressions which are in a separate video. Articles, if related, are either linked in the video description or a pinned comment.

[@danylerma73]

@@GBGuns where can I get it for $250.00

[@mywifehatesguns]

CDNN $299.99

[@rochelle123ist]

I live in California and I paid $469 for my SD9!

[@juanagosto6671]

Guns are more expensive right now thats why this gun a year ago would have cost way less

[@GBGuns]

Yup, and another reason why I try not to quote prices in videos. Prices change, the video does not

[@luigiquintarelli]

Best comment from 09:00 on: great, thanks! 👍🏻

[@Thundarr995]

It's not a peice of junk. But if you buy it, in a month you'll probably wish you just saved up a little more money and bought a better gun. My friend bought one,that was his first gun. After he bought it he watched a bunch of KZbin videos. He thought that the plastic guide rod was a bad thing,so he put a stainless steel guide rod in it. Then he decided to get the Apex trigger. We went shooting up in the foot hills ,about a year ago. The frame on his gun cracked. I own one too. Mine has probably 3k rounds through it. I never modded mine. My opinion. If you're gonna use it for home defense just leave it as it is. If you want a range toy or you want to shoot hot loads.....buy a better gun.

[@TUKByV]

SW issues polymer guide rods for a reason.

[@kipperwhite2976]

TY good intel gotta source 4 sigma mag's R they interchangable w/the SD model TY? actually wanna sigma but hard 2 find Nmy area so far

[@ratagris21]

Great video and presentation and is a builder pistol being that you have to upgrade it over time i.e. better trigger, sights, etc if you want to make it a better pistol. Its impressive, but if you go to some stores they tell you to carry it on an empty chamber since there's not safety.

[@Procraseighter]

Anyone telling you to carry on an empty chamber is a fool. Most defensive guns do not have safeties on them, and are intended to be carried with a round chambered. You wouldn't put on a seatbelt right when you're having a wreck would you? Would you wait to put on an oven mitt until after you have grabbed a hot pan? If your answer to those is no, then why would you wait until you need to use your gun to try to chamber a round? It's too late by then!

[@whyyoutrippindeebo3514]

Good review 👍🏾

[@gomitoz35town]

I have the first model sd9 BNB unfired I'm planning to upgrading it with apex trigger shoe and SS guide rode spring but idk if I should go with 18 lb or 20 lb

[@ihatefords1000]

Warning the ss guide rod is trouble in the sd9ve

[@tonya6105]

I am looking at this glock 19 and bersa 380. I got small hands but I see this gun might be a good fit. Any suggestions

[@GBGuns]

With smaller hands any of those options will do. This or the Bersa will be the least expensive.

[@tonya6105]

@@GBGuns thanks

[@frigofflayhey5976]

Dont point that gun at me. Im just playin

[@shirleystratton6076]

I need help finding a 30 rd mag for this

[@kaidangundam5848]

Me to but i think Pro magazine got them 30$ or 25$

[@shirleystratton6076]

But it is the right one

[@shirleystratton6076]

As far as I know they dont make one for this gun

[@kaidangundam5848]

Yes this the right gun but they make one for the 40 smith &Wesson

[@TUKByV]

Pro Mag and one other company make them.

[@mozzberg590]

They are still making these things?

[@Eman1900O]

mozzberg they are in every Academy Sports it seems. Sometimes on sale.

[@rubykaufman5361]

$299.99 everyday at Academy 9 or 40!