Had the same problem every thing was fixed new sparks plugs and replaced my coil pack never check my wires I should tell my mechanic thankyou man💯
@s33therfan3 жыл бұрын
Yes , I believe this is a common problem. I have had 2 with harness issues . Thank you for watching.
@saeljhonnes76883 жыл бұрын
Mines reads Cylinder 2 misfire. I have a 2016 chevy cruze. It only recently started to do this. I checked the spark plugs coils are clean. Now this video is very informative my mechanic wanted to get off changing the entire plug system for 950$
@s33therfan3 жыл бұрын
Hope you get it solved quickly , thank you for watching.
@joycemoore86582 жыл бұрын
Did it fix the problem
@Sebastian167533 жыл бұрын
I'm really glad I came across your video, I was having the exact same problem with my 2016 Cruze 1.8. Thank you very much for sharing this with us.
@s33therfan3 жыл бұрын
Glad the video could be of help. Thank you for the great feedback.
@ledzeppelin12123 жыл бұрын
This could be the problem on my 2015 Chevy Trax. Thanks for the video!
@s33therfan3 жыл бұрын
Thank you for watching.
@ledzeppelin12123 жыл бұрын
@@s33therfan It ended up being the coil pack, but great video nonetheless!
@cfalletta7220 Жыл бұрын
Great video I have the same car and this same thing is happening to me expect the harness tab is broken on my the car is firing fine but the check engine light is still on I’m going to check the wires asap thanks for the tip
@s33therfan Жыл бұрын
Best of luck , thank you for the feedback.
@expatinbrazil Жыл бұрын
Thanks man, means a lot your experience shared with us ! Respect!
@s33therfan Жыл бұрын
I really appreciate you taking the time to leave terrific feedback , thank you.
@TheThirdWheel6182 жыл бұрын
another satisfied viewer here I have a 1.4 L Sonic RS and tonight after work first start up it was running like crap first P0171 then P0303 flashing . I have some performance mods on the car and I noticed on spirited driving it would feel like it was cutting out but I couldn't tell for sure now I no I have a ultra gauge hooked up so I can check ✔️ certain things but I will for sure look at that harness thanks
@s33therfan2 жыл бұрын
Thank you for sharing your experience and the great feedback.
@TheThirdWheel6182 жыл бұрын
@@s33therfan believe it or not it was the coil I had a zz performance coil on the car and I thought no way it could be that? Turns out it was the coil I put my stock coil back in and I'm sending the ZZ one back under 2-year warranty so the sucker went out in less than 2 years and with only about maybe 25,000 miles
@kristinapehrson48442 ай бұрын
I have replaced my fuel injectors, throttle body, air filter, spark plugs, coil pack, air purge valve, pcv valve. Afte ri changed the coil pack, it drove like butter, just oerfect, and within a week, back to the same stuff. I'm going to look at this next. I had a 302 was all. Was recommended ro change the fuel injectors so i did that and just snowballing replacing things. I deliver for a job and work every single day so i dont have time to mess around. This has sucked so much.
@s33therfan2 ай бұрын
It can be a real pain when you have to keep replacing parts. Hopefully, this video is a step in the right direction.
@Myqueshaful3 жыл бұрын
Hey I’m having issues I have a 2016 Chevy Cruze limited 1.4 . I got an oil change and tire rotation last Tuesday , the same day , my traction control and stabilitrak lights came on and check engine light started blinking , my fuel level is depriving. before all this I would fill up and get almost 400 Miles now my tank says full at 280 miles , I changed ignition coil pack bc cylinder one keeps coming back misfiring even after coil pack was changed it’s running very rough
@s33therfan3 жыл бұрын
The traction control warning is definitely related to the tire rotation if it was fine before. The other more immediate issue with the missfire., needs to be addressed. I have seen 2 of these cars recent with either coil pack 7 pin plug issue or harness issue. I would start with the 7 pin coil plug replacement they are notorious to cause this. Replacement requires soldering in a new one which is not hard but tedious and time consuming. Here is link to the 7 pin plug. amzn.to/3F2bzif
@Myqueshaful3 жыл бұрын
@@s33therfan hey ok so I check all of this: the wheel speed sensors was ok , I changed the battery(from a friend car) to see if that was the problem : I checked fuel pressure , I have no coil pack , no damage to either of plugs , I had my throttle body cleaned , I just the lil spray air machine to check for vaccum leak ,(NONE) but I do hear a hissing noise (like a air machine for tires) , my fuel injectors are good , I change my coolant tank cause it did have a small whole at the bottom . I also checked my fuel tank , no hole , no oil leaks under the car or in any parts my oil is good , all the wires are plugged in , I have a new mass air flow sensor . All the fuses are good I checked the wires on pcm it’s good , my valve cover is good (it doesn’t suck in air& there’s no sign of oil or leaks around it , I even tried to find a way to reset , I drove with out it coming on but when you switch the car off and back on the stabili and traction light both come on with flashing engine light , i don’t know what to do atp , the codes I’m getting p0301 P2301 & occasionally P0599 , it keeps saying misfire it 1 & thermostat pressure , idk what to do atp
@stephenkhampeth55713 жыл бұрын
@@Myqueshaful having the same issue did you get that problem fixed?
@timduncan96962 жыл бұрын
Did u notice that your car started vibrating noticeably more when driving? Happening in my 2016 1.4 cruze LT. Mechanic said it's piston 1 misfire and it'll cost 8k to fix it
@CarlosGarcia-ls4hn2 жыл бұрын
Would you please give us the sequence of the cylinder numbers? Is number 1 the far left cylinder as you face the engine? What cylinder follows after that?
@errorlessdeer5155 Жыл бұрын
1-2-3-4, left to right. identification for inline in always "front" to "rear" (Transmission is always connected at "rear" Firing order is something like 1-3-4-2.
@PutPup9 ай бұрын
1-3-4-2
@crlaw75 Жыл бұрын
Good to know. Start small and work your way up.
@s33therfan Жыл бұрын
Absolutely , thank you for the feedback.
@WillArmes802 жыл бұрын
So I just picked up an aftermarket connector/pigtail with all white wires. What would be the easiest method in this situation? Cut at a certain point and match up each wire?
@s33therfan2 жыл бұрын
Yes , do one at a time starting from left to right or other etc. If it is an aftermarket make absolute sure the connector locks on to the coil pack properly before soldering it on. Thanks for the feedback.
@WillArmes802 жыл бұрын
@@s33therfan excellent advice! I did just the way you said and it was a breeze. Only difference is I used but connectors and used a small torch to melt them down after crimping them then wrapped the entire bundle in loom and electrical tape.
@drivenowdrivingschool16712 жыл бұрын
Amazing help, thank you
@s33therfan2 жыл бұрын
Thank you very much for watching.
@rob74392 жыл бұрын
Im hoping this is my problem. I've just replaced the turbo, the oil and coolant lines on the turbo, the thermostat, the valve cover, the v3.4 pcv fix, new spark plugs, new battery, and new coil pack. I had no check engine light finally then after some light aggressive driving noticed it would sputter at 3500-4000 rpm and the check engine light would flash but go away, now its on and stays on with code P0300 random multiple misfires. So sad after putting $1300 worth of parts into it. There are still plenty of issues that can cause a misfire I don't know what else to do.
@s33therfan2 жыл бұрын
Yes , replacing this 7 pin connector may be your issue as well. I have another video where I replaced the entire harness to fix my issue. Thanks for watching. here's the video kzbin.info/www/bejne/hpPEmamcoJWtb5o
@ItsDexx3 жыл бұрын
What was the issues you were receiving? Shaking? Accerlation issue?
@s33therfan3 жыл бұрын
It basically ran so rough it could not be driven. Thanks for watching.
@laurakibben41473 жыл бұрын
For mine, all of the above. Then stopped for a week, then restarted and croaked completely. 2014 chevy cruze 1.4l turbo codes p0300, p2076, p0171 and p0324 Changed coil pack as per AutoZone and head gasket with PCV attached to no avail.
@ryanchristensen17993 жыл бұрын
I'm getting this on my 2018 1.8l chevy sonic with only 21000 miles. I had filled up with 2.2 gal of bad gas 12 days ago. I purged the system of this gas but ever since then I'm getting this pending code p0301 sporadically. I pulled the plug and it looked fine to me so now I'm now thinking the bad gas messed up that one injector?
@s33therfan3 жыл бұрын
I wouldn't think so , it may just need to have some injector cleaner ran through. Worse case it may need to be taken out and cleaned. I really haven't came across this problem from bad gas . It could also be the bad gas issue caused another problem to rear its head. I would check everything from plugs to coils while you're at it. Hope you get it solved . Thanks for watching.
@dancurrier6421 Жыл бұрын
i have a 2015 Chevy Cruze Lt 1.4 tubro i have replaced spark plugs and coil pack no luck on my dashboard it says service stabilizer and traction control took out new spark plugs to check them soaked in gas not sure why that is
@s33therfan Жыл бұрын
Try replacing this next . Sounds like no spark. If this doesn't work , you may have to replace the harness. The service stabilizer does not affect the engines missfire , entirely seperate issue. Hope this helps. amzn.to/47ltLkM
@s33therfan Жыл бұрын
Here is another video I made , I actually replaced the entire harness due to a short it had. kzbin.info/www/bejne/hpPEmamcoJWtb5o
@Alvinyokatori Жыл бұрын
How to test the wires
@cynthiahoward61534 жыл бұрын
Where can I find that same connector on my 2012 malibu..I have a po301. Engine running rough. Plugs and coils were change, fixed p0013 and p0014. Im stuck, please help! Thanks
@s33therfan4 жыл бұрын
Heres a link to the plug . Look at this on eBay www.ebay.com/itm/362924493533 Thank you for watching.
@cynthiahoward61534 жыл бұрын
@@s33therfan thanks for your response, I will look it up and try it. Thank you so much, you are appreciated! Cyndi
@N_Andrews3 жыл бұрын
Pick up a cheap 40w pencil iron, much easier to work with for small wires. I use a Hakko 888 but I do a lot of electrical work so the $100 investment paid for itself.
@s33therfan3 жыл бұрын
Thanks for the information , I appreciate it.
@jordanstory43422 жыл бұрын
i had this problem last year on my 2016 malibu. service stabilitrak light comes on flashing engine light follows. changed spark plugs and all 4 coil packs. flash forward a year and the same problem shows up again
@s33therfan2 жыл бұрын
Thank you for sharing , hope you get the issue resolved.
@joycemoore86582 жыл бұрын
Did it fix the problem
@s33therfan2 жыл бұрын
100 % . Thanks for watching.
@gellishustle5002 жыл бұрын
👌
@ahmedalnaimiy32952 жыл бұрын
Hello .i have the same car can you please send the wiring diagram 7pin to me ..thanks
@s33therfan2 жыл бұрын
Ignition coil wiring schematics | Chevrolet Cruze Forums www.cruzetalk.com/threads/ignition-coil-wiring-schematics.229730/ Thanks for watching.
@rubengarcia69204 жыл бұрын
I have seen a couple with the same problem
@s33therfan4 жыл бұрын
Thank you for the feedback and thanks for watching.
@justtisha2 жыл бұрын
Nice video
@s33therfan2 жыл бұрын
Thank you for watching.
@Ayato6664 жыл бұрын
Just had this but in mine the piston broke off inside the engine thankfully it was under warranty or I would have paid 8000 dollars