Saab 9 3 V6 2 8 Turbo Rear Spark plugs and coil removal

[@mav3ric100]

Thanks so much for this video. I am becoming more of a DIYer because of my 9-3 2.8 and this was my first big job on the car (coils) and I successfully did it without breaking anything because of you.

[@tripsquared_greenworks]

your awesome, I've been needing to do this job on my car for the past 10000 miles and it has made me very apprehensive but after your video I Know I Can Do It thank you very much

[@AdrianVargas71637]

Thank you so much! your video was a great help in replacing all ignition coils and spark plugs on my 06 Aero. I followed it step by step and I did it took a little over an hour. Thanks again!

[@onekcali]

Lifesaver. Thank you for the in-depth review. Have to do this next. Changed out my purge valve earlier today. Wish I had seen this first. Greatly appreciated!

[@govind20231]

Thanks for the video, it helped me navigate through the maze of vacuum hoses with confidence on my 2009 93 Aero

[@ChrysALearnNSave]

Yr welcome! I'm glad I could help.. Good luck!

[@roddymoscoso8565]

Thanks for the great video! It helped me a ton to get this job done by myself. Thanks again!

[@EdwardA-yr6gm]

Thanks for this Video very helpful- The vedio was able to how step by step, unlike other videos that I have found.

[@ChrysALearnNSave]

Hello, I appreciate your feedback! yes they are in difficult location to get to these spark spark plugs.

[@2004sl]

What a Lifesaver! THANKS!!!!!

[@alext2184]

That MAP sensor that he talks about at 5:10, does the lower part plug anywhere or just sits through the bracket opening?It has that little green o ring but it looks like it just sits screwed to the bracket? Is that true or does it needs to be pluged into something under the bracket?

[@stiggyness1976]

Alex T That sensor is the atmospheric air pressure sensor, it measures air pressure outside, i.e. the air we breath and hence the air the engine sucks in, its used by the turbo system to have a base pressure reading before any boost is added.

[@mohanadal-rezally5736]

Thank you , good jop

[@losteden]

is good idea to upgrade for the silicon ones?

[@Altepeter]

In process of very same job. Now up to point of “you figure out”. lol.

[@WakkoYakkoDot123]

I'm stuck there right now! It looks like there's a small snap on the top and a piece that has to be lifted facing the rear of the car, but it won't budge. Is there something I'm missing?

[@JR-os1dg]

So I just changed my alternator my check engine light came on shortly afterand then shortly after that I crank my car up and it started jerking kept running in the jerking slowly went away what could that be spark plugs

[@PapaWilk]

3:44 - he points at coil #1

[@PapaWilk]

8:20 - he points at extremely fragile hard plastic vacuum hose

[@PapaWilk]

10:28 he points at coil #5

[@PapaWilk]

12:42 - recap

[@dannyroddis303]

I did this on my car today and all was well but then i started the car and now im getting a clicking sound from that are and my turbos getting way hotter than usual. Can anyone help

[@deanmcclaughlin914]

Easier and quicker to just remove the inlet manifold

[@JS-ri2rx]

Good video but you need to do better camera work. Like watching a modern Hollywood movie