SAB Goblin RAW 700 Piuma 6s Build

In this video we finish up the build on Jason Piuma 700 6s build. What a incredible heli and SAB quality is always outstanding! Thank you again Jason for letting me finish up this incredible model!
Want me to build you a heli?! Need help with your build? Want to send something to the channel? Send me a email!
[e-mail]

[@kronchyrodriguez]

Your videos are awesome very insightful I love the way you wired the helicopters makes me wanna go buy one!! Do you feel like building another one

[@westhobbiesrc8051]

@@kronchyrodriguez I’m glad you enjoy the videos! I can build you anything you like! Send me a email.

[@johnbooth8376]

Your videos are awesome. I’ve learned a ton from them. Where can I find the tail boom mount for the sell antennas?

[@westhobbiesrc8051]

Thank you! I appreciate that. I’m glad the videos are helpful. You can send me a email [e-mail] and I can get you a antenna mount.

[@wm6639]

Hello The canopy of the Piuma fits the Raw 580? Greetings Michi

[@westhobbiesrc8051]

Hello, unfortunately no. The Piuma canopy is bigger then the 580.

[@wm6639]

Ok, thank you. Greetings

[@westhobbiesrc8051]

@@wm6639 you’re welcome!

[@MichaelWilliams-ng4kc]

Hey Jeff, what size mains were used on this build?

[@usausa5922]

? Want to know more about the two recievers your using and binding

[@R.B_B]

My question too why this setup for the receiver's? Thank's

[@westhobbiesrc8051]

One is a SRXL2 and the other is a DSMX satellite. The SRXL2 is the newest full telemetry RX that’s full range from spektrum. So you get telemetry capabilities to your transmitter as well as very fast RX which rate and extremely long range and the DSMX satellite is there for back up and a second RX if need be. You bind as SRXL2 in the iKon software.

[@anjolasboy]

Jeff, question: Raw 580 or Piuma, for 6s setup? whats your opinion

[@westhobbiesrc8051]

@@anjolasboy RAW 580 hands down! Piuma is really nice but can be a PITA with low head speed wobble and the RAW 580 does amazing at all head speeds!

[@jasonmitchell9926]

Do you run 2 satelites with the SRLX2? seen you have run the srlx2 up on servo as well. Im using a tx16s radio which has been very intense. Last heli I owned goblin 700 and align 700 was about 8-9 years ago. was running FASST futaba and this is all new to me. thanks your videos are awesome great help

[@westhobbiesrc8051]

I do both, two satellites and SRXL2 OR just one satellite and SRXL2. You don’t need two satellites but it can’t hurt. Redundancy, more receiver satellites the better. I don’t like having any signal problems. The TX16S can be very difficult to learn, I hardly ever use mine anymore. I use to have a futaba FASST as well! You’re welcome! I, glad the videos are helpful!

[@DetoursRC]

Ive got a question. Can you use srxl2 and dsmx satellites together? Like srxl2 in the servo port and dsmx in a sat port for redundancy? Or does it have to be one or the other? My fbl setup requires me to choose one or the other in the software.

[@westhobbiesrc8051]

Yes that is how you wire it. SRXL2 into the servo port DSMX satellite into the side port. Depending on the FBL you are using or you were just select SRXL2 and binded together. Some FBL units don’t support the actual telemetry of the SRXL but it will still bind and work together.

[@juanfeliperinconcolmenares6730]

Those Sunnysky motors are still available? I can't find them on internet....

[@westhobbiesrc8051]

This motor is a prototype, it’s not available for sale yet but will be soon.

[@rickdawg73]

I enjoy your vids but do you only do SAB builds?

[@westhobbiesrc8051]

Thanks! No I do everything! Lately I’ve done a lot of SAB but I have built and have videos on almost every heli. The next build series is a Gaui and the one after is a XL. But yes I build a lot of SAB models. I build what ever customers want. And SAB is the biggest and most sold model.

[@tombruck3026]

Hi......how can i get one of those 3d printed antenna holder for the puima , Thanks

[@westhobbiesrc8051]

Hey Tom, send me a email at [e-mail]

[@katpis9121]

Awesome video as usual! Quick question about the fabric paint you used for securing the servo leads. Does it come off easy? I might want to order some of that :)

[@westhobbiesrc8051]

Thank you yes it does come off easily X-Acto knife. You kind of just cut it and then peel. It is false and stuff and I use it on every connection! www.amazon.com/Tulip-41401-Dimensional-Fabric-Paint/dp/B004BQ01CQ/ref=sr_1_2_mod_primary_new?crid=1KSCPWG2UONA0&keywords=black+fabric+paint&qid=1668290651&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=Black+fabric+paint%2Caps%2C132&sr=8-2

[@katpis9121]

@@westhobbiesrc8051 sweet!! Thanks buddy, I just ordered some. I was using goop and it just always made a mess

[@westhobbiesrc8051]

@katpis you’re welcome! Yeah goop makes a mess! I have used E600 as well (same thing) and it’s messy!

[@tlrcamp8009]

What’s the difference between the thicker icon 2 versus the thinner icon 2 that you use on the 580 raw?

[@westhobbiesrc8051]

The iKon 2 HD has a designated power rail for your servos. It’s better for running high power servos as it splits the power to it’s on designated rail. Also it has a switch to be turned off and on mainly for Nitro models. The regular iKon 2 works great for every electric heli and this one got a iKon 2 HD because that’s all that was in stock.

[@toadiscoil]

Come on! Now another one is trying to be the first

[@deersbrook4485]

Would you be the same Javier as the one on the podcast that I listen to? I guess there are thousands of Javiers but thought I'd ask!

[@toadiscoil]

@@deersbrook4485 Well I AM the Javier of Skids Up podcast, hope that is the one you listen to :)

[@deersbrook4485]

@@toadiscoil I sure do! I only have a couple of cheap Blade helicopters so don't always know what you're talking about but I enjoy any RC heli chat so keep up the good work!

[@toadiscoil]

@@deersbrook4485 Thanks! I am actually flying a Blade Nano S2 during winter re-learning my orientations trying to get them fully in muscle memory. I have a video for that on my channel

[@deersbrook4485]

@@toadiscoil I didn't know you had a channel. I'll look it up and subscribe!

[@garymurphy5133]

Sorry if i have missed it but why fabric paint? is it removable?

[@westhobbiesrc8051]

Yes it’s removable and clean looking and runs nicely into the connectors and holds them all together and stops anything from pulling out.

[@skrub6969]

I like that motor but I can’t find it on the interweb, anyone have a web link for it?

[@westhobbiesrc8051]

As of now it’s just a prototype but should be available soon!

[@larrychamel]

Well Done Jeff, Another Spectacular Build! 😍👍

[@westhobbiesrc8051]

Thanks Larry! Hope is well with you and your family!

[@700sizehelisaretoosmall]

Hi mates is the 8s a good alternative or better go 6?

[@westhobbiesrc8051]

It really all depends on what you kind of flying style and heli you want. I would say 8s or 12s just because 6s pulls a lot of amps under hard flying.

[@700sizehelisaretoosmall]

@@westhobbiesrc8051and for modest flying with a healthy power reserve? Is this the area of 8s? Like a v8 Hemi having it doesn’t mean you gotta abuse it the power 🥳?

[@westhobbiesrc8051]

@@700sizehelisaretoosmall I’ve never flown a Piuma on 8s. Only 6s and 12s but I’m sure it will have good power. Nothing crazy but better than 6s. What motor?

[@700sizehelisaretoosmall]

@@westhobbiesrc8051 kontronik pyro 650-83L on a hw150 platinum v5 6-8s Esc

[@700sizehelisaretoosmall]

@@westhobbiesrc8051 piuma 8s setup Kontronik pyro 650-83 Hobbywing 150 Esc Kst x20 Combo Brain 2 And Spektrum Build The Heli will fly on 8s 5000 mah Looks docile doesn’t? ^^^^^ the words from me to Kyle Stacy Himself

[@robstanton9215]

Awesome work as always Jeff!! Off the subject of the RAW 700, have you checked out the new Spektrum IX-14? The IX-12 has been discontinued and I think the 14 is taking it’s place. I was thinking of upgrading to it. Do you have any feed back on it?

[@westhobbiesrc8051]

Thank you Rob! Always appreciate it! Yes I have! I really like it, might have to upgrade! It’s very fast and smooth. Everything I’ve heard and see so far it’s a incredible radio! Really hoping I can get one seen!

[@robstanton9215]

@@westhobbiesrc8051Thanks Bro! I may have to order one!

[@westhobbiesrc8051]

@Rob Stanton I might have to get one too! I will get one just don’t know when lol

[@28EduardoSierra]

Can that motor handle 12 s

[@westhobbiesrc8051]

No, KV is way to high. 12s KV is around 500. This motor is 1200KV.

[@gjpyzf]

Love you're videos and I am interested in that antenna holder i run the same receivers

[@westhobbiesrc8051]

Thank you! I appreciate it! Send me a email at [e-mail] I can send you one.

[@gjpyzf]

@@westhobbiesrc8051 thanks!!

[@donyportillo790]

How was the ESC attached?

[@westhobbiesrc8051]

Double sided tape and a zip tied to hold the wires up out of the way underneath.

[@hugopedrazarc427]

😎👍👌😎

[@jeffmayo8848]

First!

[@westhobbiesrc8051]

Heck yeah! Notifications on!

[@bentonn]

Great video as always. What glue are you using please?

[@raptor1961]

Same question mentioned as fabric paint ?