Saeco Philips solenoid valve hot water steam defect

The video shows the location of the solenoid valve position and other details

[@lucatrombin1846]

Hi Milen, thanks a lot for this video, you saved my life since the solenoid of my machine was stuck as closed because I didn't used it for 2 years. I dismounted it, just moved and added water and it works perfectly now!!! PS: I added a note to my video to explain what I did to fix my problem with this video: kzbin.info/www/bejne/aqCbkIuIfK2nbKc&ab_channel=LucaTrombin Thanks a lot again, I was not thinking that the valve can be dismounted 😀!!!

[@julienbarrouillet7408]

Hi Milen, quite bit disappointed today. Steam Milk is not working well anymore from my machine. Seem that the pressure is not enough. We clean the main head everything is ok. Although regular coffee / hot water is working properly. The milk clean is really long and the milk not froafy. Any idea??

[@Blameberg]

Bro i got problem with Latte go 5400. I push it on and it starts immediate preheating, it stops around 50% and displays error 15 - heating problem. The heater in the boiler works fine, so as the NTC thermistor and both security thermostats. I realised there is no water going to the boiler thru the Ulca vibrating pump so it starts preheating without any water and later it cut off one of the sec. Thermostats because the heater is heating the case and not water. But i checked and completely repassed the Ulca valve and it works fine if I put it directly to 230V. So.. I though there could be problem with the AC switching thyristor that is switching the pump. Or the machine things that the boiler system is full of water so on the startup it starts immediate preheating but.. The capacitivw water level sensor, if it fails, would it even register the water tank in the input? Because its registering the insterted tank dude im fcn tired of this crap.. I need to solve it somehow

[@Blameberg]

By the way, Im Milan from czech rep.

[@Denis-vk4vg]

Dear Milen, thanks a lot for the different videos you made for Saeco coffee machine. I would appreciate your help. I own a Saeco Talea Giro plus. No water or steam is coming at all, either from the coffee dispenser or the water/steam pipe. I have a fixed red exclamation dot when I try to get coffee or water/steam. I checked the flowmeter and the water pump acts with a regular sound. Where should I look ? Thanks a lot and take care.

[@paulsummers6467]

your vidios are very good but my problem with my saeco poemia is THE WATER COMES OUT ALRIGHT EVERY TIME, BUT ONLY WARM, NOT HOT, can you help with this problem, thank you.

[@jipi]

Hi! First thank you for your video! Can you help with a issue i have on my philips series 2200 please? The machine is making coffee ok, but not frothing the milk like usual, it just bubbling in the milk but slower than usual. Do you think it can be the pump or something else? I took the pump apart but all orings look ok, also the little ball.

[@__LIN___]

Здравейте. Нормално ли е xsmall да почуква докато прави пара? Нашата я взехме 2ра употреба, но почуква на равни интервали през около 2 секунди, докато прави пара. Протеснявам се, че това може да я повреди. Трябва да ае декалцира или проблемът е друг? Благодаря в аванс!

[@seandineen1134]

Maybe a stupid question, but how did you get the cover off? I have a Saeco (Philips) Xelsis and big lack of eternal torx screws. Maybe I'm missing a trick to access at same brand. I DEFINITELY have this same solenoid problem.

[@zoltancsury9536]

Hi Milen, Thanks for the video! I have a very similar problem with my Saeco PicoBarista espresso machine. It suddenly stopped producing steam/hot water on the milk carafe/hot water attachment. Actually there is a small amount of hot water/steam coming out, but definitely not enough to produce milk foam. The water pump also has a strange, more silent noise during steam/hot water. I've also noticed that the drip tray is filling up faster with water, like a part of steam/hot water is ending up there. The coffee brewing seems to work properly (also the water pump has normal sound), although in the same moment when the steam problem appeared, the brew unit mechanism has blocked during coffee brewing. I was able to unblock it by turning the machine off/on. But the problem with steam/hot water is still present. Do you think it is the solenoid valve you showed in you video? Is it somehow blocked in almost closed position? Thanks! Zoltan

[@avibm948]

Was it the selenoid valve? I have the same problem. Intermittent steam

[@dereckh]

Curious too - similar problem.

[@vaixohdanilonovaix]

Olá aconteceu comigo aqui no Brasil, devido excesso de uso do vaporizador aquecimento não placa mãe o eprom deu problema vou ter que reprogramar

[@CoffeeMachine12343]

Error 21 what’s that pls?

[@user-bg1zj8kc4f]

Hello Making cappuccino milk steam is not hot, what is the problem?

[@disusereuse_ApplianceHealer]

I would like to see you make a video sometime on the Saeco Intelia/(Philips) ones that the Green Light for the display goes out and will not stay on. I've heard that it could be the rib-cable but I find this difficult to believe as they say it comes on but don't stay on. Lot's of forums about it but no real answers yet. Let's get some and tear them apart to find the faulty components? I had one but let it slip threw my hands as the customer wanted it back without fixing that problem, I thought at first the wires the power the unit so I soldered the directly on the board but this didn't solve it. Then I had to give it back:( I'm waiting on the next one to play with the circuit some more and trace the root cause:) It's becoming a common problem here in Canada from what I can tell maybe has to do with our voltage spikes or the cold climate?

[@zsolthovi9809]

Subtitling?

[@jovanjancic8319]

Pozdrav Milene! I have problem with saeco syntia and I can't solve it. Grinder is grinding and sometimes dispense coffee regular, but sometimes it grinds, and then waste coffee and signs that there is no coffee beans, but there is. Do you know what is problem?

[@michaelb70]

Question, when I make a coffee, it take beans, and so in... When it needs to pour the coffee it makes a sound that looks like something is stuck. Its building up pressure but no coffee, come out the nozzle. After a while it stops and shows a signal on the display with a START option. When I select start, it dumps hot water throughout the milk discpencer. Not mut, but a small amount. I think it is to releave pressure. I've checked a. Your videos, but can't find a problem like mine. Can you tell me what could be the problem. Is it the solenoid valve maybe? Thanks in advance. Michael

[@petrankanenov385]

Hi Milen, I am having problems with my LatteGo 3200. Steam seems to be leaking out at the connection with the milk container and not fully going through the milk container. So I can’t get milk frothed well. Cleaned everything and tried every possible tip…Can you please help?

[@catrinaludemann6415]

Do you have the part number for the solenoid valve for the water frother unit? Our EP3241series is bypassing and dumping straight into the wastewater tray!

[@yavoryordanov7045]

Здравейте Милен, първо да благадаря за видеото което е добро и явно помага на много хора. Моя проблем вероятно е свързан с този соленоид, но в моя случай аз нямам теч, но машината не прави (steam) и съответно не прави пияна на млякото за капучино. Дали отново проблема е същия? Saeco Royal semiprofessional old.

[@lubominev6518]

Здравейте, бихте ли споделили има ли как да видя колко кафета е направила машината? Philips EP5363.

[@bmossnyc]

Hi. Can you work on the Saeco Xelsis Evo? Mine is leaking out of the bottom back left side. I can’t figure out how to open the side.

[@Syncopia]

I have both a newer xelsis and an older Brera. The Brera has the manual valve and has been working for 13 years. The xelsis is barely 3 years old and is already leaking tons of water from a solenoid that can't close fully.

[@husamfathy470]

Thanks so much for the video I have Phillips picobaristo fully automatic machine 6 month ago. Recently I have a problem. Immediately after giving the order to make coffee and the grinder starts, the brew group comes out from its place pushing the door out and make it opened. At this moment, brew group can't be back to its place ang Ihave to restart the machine again to be abel to push the brew group back into place. Highly appreciate your help 🙏🙏

[@johndep5543]

John DeP 5 hours ago Your shows are very good im impressed I need your help with my delonghi esam 6600 its 10 years old all good but temp is low do you think i should replace generator thermoblock

[@frankfrank4534]

I have a newer xelsis and the valves do not show any voltage. During startup when it start rinsing the pressure seems to build up and leak water as the valves don't open. What would cause lack of voltage to solenoids? They all test at 83ohms

[@reinoutgrepdon7403]

Hi, i’ve openend up my Saeco Minuto and have noticed that the boiler oxidates a lot. Is this normal? Thanks

[@gulberkuckardes39]

Hi Milen, I am very impressed that you repair the apparat, I have Philips HD8829, about 1 year, now it doesn’t work properly, water leaks from the bottom and the lights for the water and warning are always on, I have no idea what I have to do, I open the apparat, but couldn’t find any problem. Maybe you can tell what should I do. What to repair??? Thank you in advance.

[@mohamedamineeelgueddari6564]

pls how can i repair tactile problem in philips saeco picobaristo deluxe thank you for helping

[@chrisvdwerf7653]

Hi milen, I had the same kind of problem. in my case it did not gave any water going to the brew group. so it did not give any coffee only milk troth when making a cappuchino. after doing what you are showing on the video and in my case taking the solenoid valve apart and cleaning it it does give coffee again (so hot water is going to the brew group but now the milk froth is very watery. do you have a suggestion were to look for or can you give me a qlue on what i did wrong. hope you can help me out

[@drory1]

Thanks for the explantion , I had the same issue with my Philips lettego 3200

[@ronizor4506]

Hi Milan, I have been following your videos, helping me to repair my Saeco Talea. Now I am facing an undocumented error. in turning the machine I get a message " dispenser failed..." turning the power off and on doesnt change. what could be the problem?

[@kef103]

That is a magnetic solenoid not a ceramic valve

[@rand-san2095]

Hot water comes out but I cannot get the steam to work. Please help. Thank you.

[@skoru2]

Hello Milen! Thank you very much for your help 👍

[@tdcrom]

Do sell the machines that you refurbish, and if so, where can I buy one?

[@basmasaji3808]

And for the blinder please ? I give out a cable in the motor, can you help me

[@ivankaradjov5036]

Почистил съм е по този начин , нали цедката която се намира от дясната страна, за тази цедка ли става въпрос? И благодаря за бързия отговор!

[@evienraymondvangerwen2482]

Hi Milen, do you know what is wrong with the machine HD8827 of the machine is setting a coffee. The pomp starts to pump, but a low vibraton sound tells is There is an obstruction. The outlet of the machine is dripping, but the pressure Builts up (the sound) Do you know what it can be?

[@evienraymondvangerwen2482]

We get an error code of ‘no water’

[@ivankaradjov5036]

Може ли някакъв телефон за връзка или да ми кажеш къде ти се намира сервиза , да е докарам машината да е видиш?

[@TonyPuryer]

Thanks Milen, great video. It enabled me to repair a stuck closed solenoid on an old Saeco Magic.

[@ivanhomer6950]

👍

[@arjanvandehaar5049]

i have also a problem with this. when i want to make hot water/steam, there comes no water. all the hot water is than in the botom tray. it looks like the water does not go into to the hot water tube but goes down into the bottom tray??

[@ThisGuuuy]

My 3200 Latte Go has this same exact issue. Time to dissect it!

[@Alloonney]

Zelfde probleem hier, ventiel vernieuwd, ontkalkt ( na hoop opnieuw opstarten kon dat weer ) maar ga binnenkort een nieuwe kopen want weet niet waar het probleem is.

[@alibabawelkom6302]

Grazie 👍👍

[@ivankaradjov5036]

Здравейте Милен, бих искал да ви попитам каква би била причината, когато пускам кафе от този модел кафе машина , да не иска да тече , при положение , че е отворих и почистих ?

[@milenstoitsev6676]

Почистете кафе групата и по основно металната цедка. Може да ползвате обезмаслител "meglio" и четка за зъби зада може да почистите трудните места.

[@saronico1223]

@@milenstoitsev6676 i have a saeco coffee machine that has this problem what can it be? kzbin.info/www/bejne/mnS7k52ZhJdjkLs

[@cbsberkay]

@@milenstoitsev6676 Имам подобен проблем с HD8927, не пуска вода. Възможно ли е да е проблем с помпата?

[@billelliott5576]

My problem is somewhat similar. Lattego 3200 makes coffee americano or expresso just fine. However, it will not produce hot water or milk froth. Does this indicate the other solenoid valve needs to be replaced?

[@sicklecell9999]

same problem here. did you find the problem and the solution??

[@user-bg1zj8kc4f]

I only have a problem making milk foam that is warm. But other hot drinks