FORD TRANSIT COMMON RAIL REPLACEMENT INJECTOR LEARN PROGRAMMING

[@25Wineman]

As Rob & Chris would say "Every day's a school day!"

[@Cool-iceberg]

What a great and simple explanation. Thanks a lot, mate

[@NikolasTravel]

Thanks for amazing videos iwant to ask wich scantoole u use ? Thanks

[@sprograt]

You have got to love a Sunday bonus video. 👍

[@sruk]

It’s a very short how to 👍

[@sprograt]

@@sruk It doesn't matter if it's short or long any content from you and Chris is good content, it's appreciated. 👍

[@bencosturbz7755]

I have the autel mk808bt pro and.need to code some transit injectors hopefully it will do the job , is yours the same model as mine ? Mk808 bt pro , thanks

[@philtucker1224]

Rob & Chris, thank you so much. I’ve always wondered how that was done. These instruction videos are brilliant.

[@stekwack]

Aslong as you know which cylinder is classed as cylinder 1 and which is classed as cylinder 4 then its all very straight forward, its when they count cylinder 1 as the flywheel side that it can catch you out.

[@craigrice1960]

Have you a link for the diagnostic machine your using please rob

[@johnL-ej1gd]

Compensation codes. Engineering tolerances. No 2 injectors are exactly the same. For fuel efficiency and smoother running, the ECU has to be adjusted fractionally to inject on point. By evening out and regulating the injectors. This would be measured at the factory where the injectors were made, and stamped on the injector.

[@jackiemay9471]

hi Rob i did a transit custom poor running checked injector codes in ecu to codes on the injector all different reset the ecu to match injectors it run like a bucket of crap let it do auto pilot learn the codes went back to what they was. ended up having the injectors rebuilt had all four done for the cost of the price of a new ONEi .then done a auto pilot learn for the van to set its self to the best code. what a difference that made to the performance

[@trainmanbob]

Great explanatory video Rob. These videos are of huge help to the average DIY mechanic. Well done. And in my case...who knew lol. Cheers, Bob

[@danielmason4640]

What autel scanner where you using ?

[@organiccold]

Thank you for the video Rob. I bet most of the ones asking if you programed them don't know what the programming is for 😅.

[@johnchincotta1qwdb15]

Good informative video Rob,that new engine run as sweet as a nut.That van will go out the door very soon.

[@roypowell3450]

Blimey Rob keeping me awake on a Sunday evening....good stuff mate! Have a good week.👍

[@Matt_Beale]

Hi Rob and Chris. I have a question if you can answer it? Why are the injectors coded in the first place? Is it so " Joe Public" wont be able to do the job themselves so the garage make money, or is it somthing to do with the immobiliser system on the vehicle? Have a great week 👍

[@jaytc2003]

In simple terms injectors vary from injector to injector (assume good here, faulty is totally different). This difference could be micro amounts of fuel delivered for a given injection duration. The purpose of programming the injectors is so that the ecu can compensate if necessary for the injector fitted. So if an injector sprayed more than optimal for a given duration, the ecu would adjust the duration the injector sprayed for to make it optimal. Even if not programmed though the engine should still run and you wouldn't notice any different.

[@dughuff8825]

It's actually for calibration. Each injector has to precisely deliver the right amount of fuel that the ECU expects it to or otherwise the engine running could be affected. (Most likely the emissions would be out, it'll still mostly run ok, but hey). The code tells the ECU what actual value the injector delivered when tested at manufacture.

[@tudor-dannicolae4316]

Does it not need to carry out a pilot learn after programing ?

[@eddieMurphy11111]

Nice phonetics it does get people confused if to program or not thanks for the video

[@teamemusrcreviews3225]

As usual, a pro every time!! All my jobs go wrong several times and then finally it works out👍👍

[@steve5772]

That autel is such a nice looking piece of kit. What model is it? Do you have and links where you can make a bit back if i buy one? Not bothered about a discount, but it would be great if you lads could get something out of it.

[@sruk]

I’ll have to get back to you bud as I honestly can’t remember

[@bigfella6629]

Looks like a Autel MK808BT, there is also a non Bluetooth version MK808.

[@englishbuilds]

Swiss watch. Bosh bash bosh :) love it

[@andyspencer1010]

I honestly didn't know that nice one Rob mate 👌👌👌

[@deano7382]

Well done Rob good content cheers 👍👍👍👍👍👍👍👍👍👍

[@barrywood5357]

It's so much more fun watching you doing things like this😂

[@richarddinning6901]

a big thank you to rob for my lottery numbers for Saturday if i win i will look after you and Chris.

[@stevo4649]

thankyou Rob,,,have a good week,👍👍

[@sheldonpearce2365]

Nice 1 Rob thank u 4 takin the time 2 show us what u done top lads 👍👍👍👍

[@kittinsconkers]

wow how times have changed thanks Rob

[@itsmephil2255]

Love the quick vids Rob👍

[@paulbeecham8313]

Cheers Rob perfect timing just done a mondeo injector change helped me out nicely 👌

[@mattsbeamer]

That was a nice Brucey Bonus. Thank you for this video. Very interesting. Cheers

[@raymondpearce5245]

Well done Rob and Chris a great video guys

[@duncanmcewan1049]

Very informative video Rob...Deffo be useful for a few folk.

[@gtrealm]

So my brothers van had a injector go down and we replaced it. But the van just seems to have a lack of go. We didnt programme it in. Is this why? Its a 2007 ford transit. Great vid by the way.

[@michaelmcsorley3254]

Thanks mate yet another great video the machine is very good 👍👍

[@chrispalmer2312]

Do you have to programme a 15 plate transit custom fuel injector,fuel pump and fuel pressure sensor?😊

[@georgedaville4662]

Great instructional video Rob, I am sure it will help many people out with there vehicles 👍🇬🇧😎

[@leedstown]

Rob and Chris do you remember 20 years ago the snap on scan tool diagnostic they were bigger than the one your using they were around £6000 to buy new

[@damo336]

Thanks for that video Rob, very interesting,well explained, another bit of knowledge!👍🇮🇪

[@stephenricketts7764]

Very informative thank you Rob.

[@agabanicetunemusa331]

Again ✊I love this Job with all my heart

[@johnchad292]

Hi Rod & Chris . Silly question do I have to reprogram my injectors if Iv put a new engine in ? Just it won’t start? Thanks John

[@Alexander_l322]

Nice look in to it, I’ve had to do it on a Volvo and a few other diesel cars myself, it doesn’t make alot of sense to me why the ecu needs to know the codes for them since they are for the engine they are installed in but hey ho it’s just how it’s done these days.

[@alan2804]

To ensure optimum fuel metering, the ECM must be informed of a change of injector through the input of a 16-digit identification number. Inside the hydraulic servo system there are various restrictions with extremely small diameters, which have specific manufacturing tolerances. These manufacturing tolerances are given as part of the identification number, which is located on the housing of the fuel injector.

[@stevenjones19-m8i]

Hello Rob, interesting video, always handy to know with the reader.

[@georgepaterson4825]

really good video great info well done Rob👋👍

[@DaveGreeneramblingcarpenter]

Brilliant video for me, thanks Got 2 to do on my 2.2 relay

[@deanwood2332]

nice one lads .. sunday treat

[@marcb5328]

Nice one Rob great video

[@stevencoyne4971]

Nice one Rob !👍👍👏👏

[@MohdjesriOthman-oi1id]

Nice work mate you and Chris this ford transit feul incotor

[@robertsavage9886]

Hi What AUTEL system are you using

[@hammy5012]

Can I ask what model autel diagnostic you use please rob ?

[@General_Confusion]

I missed that Rob, can you do it again?

[@kerbsiderecycling2694]

Great video guys wednesday needs to hurry up for the next one 👍👍👍

[@johnrowell942]

Thank you guys 👍💯

[@patrickcorrigan6141]

Thanks guys,was wondering!

[@jakefisher8788]

Nice sunday bonus 👍

[@Hassan123H]

Great video, thank you. Love this stuff

[@tam19711]

So easy, thanks for that one 😊

[@MrJamesSalter]

"Into the diagnostic machine; that just turns it'self off randomly" Funny you should say that. I work with Autel (Sevadis) fitting and fixing their EV Chargers, they also have a habit of turning them self off with no good reason

[@mattgregory2669]

What model Autel is that bud ?

[@acorndogs904]

Evening all

[@danielscitt4486]

good video rob

[@markgarrod4436]

Thanks Rob. 👍👍👍🇬🇧👍

[@michaelstopp8267]

Thanks Rob

[@michaelfk2548]

Top thumbs up !

[@Dave-Huston-Dublin]

Great video, do you have a link and model for your Autel, Thanks.

[@sruk]

I’ll put it in one of next week’s videos

[@michaelthompson9491]

What autel is that please ??

[@ernestpeacock5671]

Thanks rob 😊

[@robertmorris5214]

Nice one Rob

[@stephenwalsh8184]

Rob Chris We have a transit and injectors at the moment, no codes on the injectors, is that possible.

[@sruk]

If it’s a older transit

[@elliottpeters2996]

Hi Rob. Would you please message me the details of the guy who builds the Transit engines for you?

[@sheffielduk3428]

Who does the gorgeous little camper van belong to rob pal

[@Sasis-Ukvintags]

What machine is that ?

[@thegingerhustle3173]

Hopefully my connect is as easy thanks for the insight. Ps save the lse ❤️

[@a11csc]

nice one rob

[@mikejackson6511]

Great video, when is this due to go on sale?

[@sruk]

Very soon 👍

[@mikejackson6511]

@@sruk what are you asking for it?

[@michaelminers2612]

What make is the diagnostic tool and how much ? Mike

[@sruk]

Autel

[@michaelminers2612]

Thanks

[@namesanmanname297]

Good video

[@jaytc2003]

Nice info. You don't actually have to program them to work, however for optimal running it is best to do so. For people who don't have expensive diagnostic machines, there is software called fsuper which can be had for little money (get the obd adapter with it) that allows you to do Ford coding 👍

[@harrysmith5353]

Same with battery's but if you don't wanna ruin your motor 😂

[@Manchesterblu__19]

👍

[@gjek6355]

Well done xxx

[@j4zzx297]

If you don't have the computer, how many times do you need to turn the vehicle on and off 😂

[@craigrice1960]

Stella time 😅

[@peterforrest5181]

Didn't really understand the point of this video. When the new injectors were first fitted presumably there is an enter coding screen, an alpha-numeric keypad, and a "write to ECU" option. This is what I expected to see but didn't.

[@royeady800]

I was in IT for 40 years, glad to get out, seems like mechanics need a degree in IT, problem is you have two types of mechanic's now; Chris, old school and Rob, a bit more progressive!

[@duncanmcewan1049]

Did you see the video with the Hybrid that Rob and Chris had to get someone to diagnose / fix? That was more IT and electronics than mechanical stuff for sure ! Amazing video to watch to show the differences between "normal" and electric (or Hybrid) cars.

[@charlesallanstewart-kl2op]

Blimey, this is a first for me I feel so old, so what you're saying is , this is a computer in a computer,in a computer old guys like me are totally Baffled / Lost / Confused Just how the car makers Wanted.....l think l need a Sit-down & a Whiskey or two to recover, bring back the minis , escort , Cortina ☹️☹️☹️☹️😮😮😮😮🙄🙄

[@UberAlphaSirus]

Noice. But bloomin ridiculous.

[@risky8]

👏👏👏

[@jlau4083]

I don’t understand the point of this. I changed my injector awhile back and it was plug and play

[@alan2804]

To ensure optimum fuel metering, the ECM must be informed of a change of injector through the input of a 16-digit identification number. Inside the hydraulic servo system there are various restrictions with extremely small diameters, which have specific manufacturing tolerances. These manufacturing tolerances are given as part of the identification number, which is located on the housing of the fuel injector.

[@jlau4083]

Can’t they have one way to manufacture them all?

[@alan2804]

@@jlau4083Its not the method of manufacture, it’s the tolerances when they are made. Nothing is exact anywhere, ever…To understand engineering tolerances i suggest you Google it and you’ll find a whole new world to explore.

[@rachaelwyatt754]

Blinding :)

[@rogerford30]

👍👍👍

[@seangrant808]

👍🏻

[@420somewhereG]

👍🏼👍🏼👍🏼

[@darthgardner]

Cant believe the faff you have to do to a modern engine, and does it add up to more reliability/fuel economy. injectors are not always reliable and costly to replace i often wonder how we drove a car or van without all this, because we did. mind you we were not as tight on emissions as we are now but i do wonder what an engine bay full of electronics does to a wallet.

[@stephenwalsh8184]

🚘👍

[@oblioi]

:o)❤

[@freeitstafford]

Would you be interested in donating the revenue from just one of your uploads to a UK non-profit I.T. refurbisher (us)? We use all donations to turn e-waste into life changing internet ready gadgets which we then gift back to the community. We'd send our audience your way in return of course, embryonic as it is. A punt I know, but if you can help us out you'll find all our details and social links on our about page.

[@bountyhuntermk2520]

Boom

[@Ja58eer]

Forklift and lorry drivers are so heavy handed.the amount of times I have brought a car from copart and there’s more damage than what was there when I brought the car 😡

[@itsmephil2255]

And??

[@philrogers2406]

Wish you go back to the old format. . Just seems like you're rushing videos out for content

[@sruk]

This video is not in our usual schedule and is clearly a short how to. Nothing in our format has changed and it’s impossible to rush any videos as some take days to record

[@bingbong7316]

Malcontent now.

[@jbillingham68]

another cracking little video there mate will help someone out who needs to reprogram their injectors 👍👍👍💯💯💯