Supercharged C10 6.2 LS Motor Build! - 1962 LS3 Bagged Stepside Chevy C10 Ep. 4

If you want to help support the media production of this channel to keep us bringing you the process of these builds, check out our merch store at www.salvagetosavage.com
--------------------------------------------------------------------
Last week you saw us do all the fabrication to get the Airlift Performance Builder's Series shocks mounted and functioning in our 1962 C10 Stepside. Well this week we're finishing out all the fab work to start putting this c-notched and slammed truck back together. We're kicking it off by building out our LS3. Putting all the performance parts in so once it's finally mounted in place we can stick a nice, big Whipple supercharger on it! After our 6.2 LS is built, we're doing our final welds on our chassis. Our porterbuilt kit is getting a final check, then the whole chassis is getting brought out to paint! We're also doing some body work on the cab and fenders to get rid of any remaining rust on this classic chevy truck! Make sure to subscribe because next week this entire C10 is getting pulled off the chassis table, reassembled and one step closer to doing some burnouts in the parking lot!
-----------------------------------------------------------------------------------------
Want to See More S2S Madness???
LS Swapped 350z First Shakedown
• LS Swapped 350z Shaked...
1963 Travelall Transmission Debacle
• 1963 LS Swapped Travel...
Breaking the Tesla Swapped C10
• We Broke the Tesla Swa...
Turbo Chevelle + GTR Doorhandles
• GTR Door Handles on th...
Tesla C10's first burnouts!
• Burnouts in the Tesla ...

[@oldblueshhrchannel1847]

Tim has left the building! Moved on. Great build Mike! Andrew, Thanks man! David good work!

[@SalvagetoSavage]

It happens! All we can do is adjust and adapt! Thanks for all the support

[@stuey7777]

@@SalvagetoSavage wait when did Tim leave??

[@trentdawg2832]

My father had a ‘66 short bed fleetside back in the 80’s it was a show truck with the wild scallops paint scheme and all, I miss that truck, even more I miss my father….r.i.p Dad

[@SalvagetoSavage]

That sucks! It's hard to think about all the stuff you wish you kept around when you start missing someone :(

[@johnbehneman1546]

THANK YOU SO MUCH!!! I LOVE YOUR CHANNEL!!!!! GREAT VIDEO AND THANKS FOR SHARING!!!!

[@SalvagetoSavage]

Thanks for watching!

[@777Timberwolf]

Don't forget the transmission/driveshaft under the cab truck that needs to be fabricated.

[@stuey7777]

Hey guys, loving it but I do have one little thing i would have done differently on that engine. I noticed when you did the timing gear that you used the crappy chain tensioner. There's a much better "Batwing" shaped one that bolts in the middle of the upper and lower gear. Its the one from an LS2. These aren't prone to failure like the type you used (your type fails and ends up in the sump) Anyway, something to keep in your mind for the next LS. Its not an expensive mod, and its cheap insurance.

[@SalvagetoSavage]

Thanks for the tip! We'll definitely make sure to add it to the shopping list for our next LS build!

[@chrisr4815]

The music during the frame cleanup set a nice tone. These videos are very pleasant to watch. Keep up the great work.

[@SalvagetoSavage]

Thanks so much for the feedback! We like knowing what y'all like so we can make sure to keep being better!

[@chrisr4815]

@@SalvagetoSavage You're very welcome!

[@Paulster2]

Mikey ... dude ... got way too much respect for you and the crew. Always knocking it out the park and getting the job done.

[@SalvagetoSavage]

Thanks so much!

[@richardharvey8939]

Glad to see your work.,

[@SalvagetoSavage]

Thank you! Cheers!

[@jorgellamas1473]

That ceiling fan is huuuuuuuge😂😂

[@SalvagetoSavage]

If you ever had a fear of a ceiling fan falling from the ceiling when it's on high speed, this shop is not the shop for you! lol

[@absolutezero300]

Looking killer man

[@SalvagetoSavage]

Thank you!

[@joseluisnba1]

Lova how you attack the rust section, delete it and make it look 👀 easy. Súper nice job 👍

[@SalvagetoSavage]

It only looked easy cause the footage was sped up. It's just a lot of time and patience to work that metal! Thanks for the support!

[@TastingTheHeat]

Thank you for showing the LS build. So much difference from the 70’s SBC I used to build

[@SalvagetoSavage]

We're glad you enjoyed it!

[@bazilwreckerloughead]

Man, Mikey really got to flex his fabrication muscles in this one, it's like he knows what he's doing. For matching the patina on the fenders & stuff, I saw an awesome video, I think it was done by...never mind!

[@SalvagetoSavage]

LOL! Thanks for always supporting Wrecker! We really appreciate you!

[@v8sten94]

My OCD is pleased with the shock brackets. Great work.

[@SalvagetoSavage]

Thank you!

[@MrTimdtoolman1]

The truck build takes me back. I did a frame off restoration on a 66 Chevy PU back in the day and followed a lot of the same steps you guys are doing like applying mud to the frame before I primed and painted it. I loved that truck. I lowered it but we didn't slam our vehicles like they do now or use air bags but it had a nice static stance. Lovin the content guys

[@SalvagetoSavage]

We can appreciate a nice clean lowered truck! They don't always have to be slammed. It just seems like that's what we're addicted to lol Glad to give you dose of nostalgia with this one!

[@bobbyg313]

I love this channel and I love that yall spend a little extra time to clean that frame up b4 paint. Great video!!!

[@SalvagetoSavage]

Thanks so much!

[@troydority265]

I've always understood a grown man don't need no progress report but damn men your Killin it

[@SalvagetoSavage]

Thanks so much!

[@SubToTripleThreatRC]

Excellent!

[@SalvagetoSavage]

Thank you! Cheers!

[@tommyrazor11]

Always nice to see Mikey Rolls getting his hands dirty! Not just a pretty face in the office hahaha

[@George-zq2sk]

epic content. killer build.

[@LuisRamirez-ts3rp]

Next week can’t wait 💪🏽🔥🔥🔥

[@SalvagetoSavage]

So close to getting her ripping!

[@666thsense]

i got my brand new silverado ltz, but i’m thinking my next one might just be a built classic. it’d be a hell of a lot more reliable than my 64 c10 project that’s for sure!

[@SalvagetoSavage]

Reliable isn't as fun though! lol

[@andywilcox7019]

Comment for the rhythms. You guys deserve well more views, amazing all round work from production to product👌🏻

[@SalvagetoSavage]

Thank you so much! We just really appreciate all the viewers we do have! Especially when they're as awesome as y'all

[@tonylayne5726]

Awesome build fram would've looked cool in beige like the truck but you can't go wrong with satin black.

[@SalvagetoSavage]

With how low the truck sits, you're rarely ever going to get a peek at that frame! But true! A color matched frame would look sick

[@GlassWerx]

Awesome build. Can't wait for next week episode

[@SalvagetoSavage]

Thanks so much!!

[@americanpatriot4941]

GREAT works guys, you make this all look doable.

[@SalvagetoSavage]

Thanks so much! That's what we're trying to show. It's definitely all doable if you have the time and patience. It doesn't hurt to never be afraid to ask for help either!

[@SomeBoredGuy69]

Fantastic Job!👍 Excited to see the patina paint job process!😁

[@SalvagetoSavage]

Thank you!!!

[@xxJBONDxx]

I get so excited everytime I see a video posted. you guys kill it.

[@SalvagetoSavage]

Thank you so much!

[@Billyspacerocket]

Nice work Mike & Andrew - Loveit!!!

[@SalvagetoSavage]

Much appreciated!

[@Siyadlams]

Nicely done S2S. This build has been entertaining to watch. 🤙🤙🤙

[@SalvagetoSavage]

Glad you enjoy it!!

[@91ludesit]

I absolutely LOVE those wheels, they look amazeballs. I wanna build something like your travelall, but with an OM606 diesel instead of an LS.

[@SalvagetoSavage]

A diesel wagon would be sick! And everything looks killer on those Detroit Steel wheels!

[@JenzRock]

More subs. Best channel out there. Can’t wait to see it roll.

[@SalvagetoSavage]

Thank you so much for your support!

[@MyJdray]

I'm 30 seconds into the video and don't understand why there is no delorean content!? Love y'all's work hope to see the delorean more!

[@inforolleri4191]

another action packed episode!! great work S2S TEAM!!

[@mrm4155]

62 with a 6.2, hell yeah! The 62 times 2

[@SalvagetoSavage]

the six deuce deuce!

[@launceherron]

Awesome

[@SalvagetoSavage]

Thank you!

[@fahoooooooooooooood1]

You guys inspiring me to do some fabrication to my 69 Camaro ,, but i dont have the GUTTS to cut through it and cant get it fixed

[@SalvagetoSavage]

Anything can be fixed with enough time and patience!

[@brickcity9mm896]

😏Whatttt a 69 and you are guttles😬🥴

[@fishpony1211]

Love that u guys always go above and beyond for all the builds. Shows how passionate u guys are about ur work. Good shit my bros👊

[@SalvagetoSavage]

Thanks so much Fish!

[@UncleManuel]

"Hit it with paint" - and my mind instantly was like "Wait what? Does he really throw paint cans at the frame?!?" 🤪😂😁😇

[@SalvagetoSavage]

Not too far off! lol

[@nicolelongneckergallery]

Woot. Day made, a new S2S vlogs!

[@SalvagetoSavage]

Thanks so much for watching!

[@netteriv]

great work guys! you’re flying along!

[@SalvagetoSavage]

We should have her rolling down the road in no time!

[@hoagiesherlin7732]

Once again you guy's are killin the game

[@SalvagetoSavage]

Thank you!

[@theratinaCage]

Them spraying paint outside is a huge indicator they are not in California lol. Shit here in Houston you get a big fine too lol. That’s why most under the table painters paint at night lol

[@davidsmith687]

Man you guys are on point. You know what you like and how to build it, and it just keeps getting better and better. Don’t know what happened with the Chevelle situation, none of my business… however really miss the progress on it. Super awesome build on another level. Great progress on this ol girl for sure though, lookin forward to the next video. Keep on keeping on!😎💯

[@tommyrazor11]

Waiting on parts if you been following along

[@SalvagetoSavage]

Tommy is correct! We're waiting on our interior to finish all our fabrication so we can start the paint process!

[@davidsmith687]

@@tommyrazor11 I don’t know how it slipped past me because I don’t miss an episode.

[@davidsmith687]

@@SalvagetoSavage I don’t miss the shows

[@tommyrazor11]

@@davidsmith687 Mikey Rolls addressed it in a few video intros and usually every week in the comments. Gonna keep the lights on so gotta roll on with other projects

[@PabloDamon]

intro is FIRE!

[@SalvagetoSavage]

Thank you!

[@Jaywangho]

Man got to see u pullin the nissan 350z this morning down i95…

[@SalvagetoSavage]

Yes!!! That was Andrew getting ready to go to Sebring for his drift event!

[@addisonaugusta6198]

Did i miss something? I havent seen Tim on the episodes lately.

[@SalvagetoSavage]

He moved on to another project unfortunately!

[@gavster89]

Another project or another company? That's a shame, he was good behind the camera and his skills spoke for themselves.

[@michaelatkin9649]

@@SalvagetoSavage so we'll never have an update on the Delorean?

[@ianbenedict6994]

He seemed like a baby, I feel like he didn't get his way. All speculation, I'm sorry I'm very cynical haha not sorry🤪

[@jeromeirving4770]

376 is a ls3 6.2

[@krusher74]

That chassis could have done with blasting before paint. I hope its going to be a dry garage queen or that bondo is pealing off there in a few years.

[@mrm4155]

Solid engine mounts? That’s gonna be rough! Bad ass but the vibrations would drive me crazy

[@SalvagetoSavage]

It's like a back massage while you drive! lol

[@enricodigenova8112]

Great job guys 👍👍

[@SalvagetoSavage]

Thank you 😁

[@masterg8189]

💪👊👋

[@LuisRamirez-ts3rp]

Ty ty ty

[@SalvagetoSavage]

Thanks for watching Luis!

[@LuisRamirez-ts3rp]

@@SalvagetoSavage you guys are great I love watching I have a 79 olds and a 71 gs 350 knowledgeable information you guys give ty so much

[@cliff4695]

Umm, did you treat the rust behind your patches, on the front fenders? Maybe I missed it, just didn't see it

[@SalvagetoSavage]

Yup! Sprayed it with rust converter before we even started welding it up!

[@pedrofernando176]

👍✌

[@alexdani3519]

Самый стильный маляр😎

[@mkdrivingzone]

Chavelle build? How is that coming along?

[@SalvagetoSavage]

We're waiting on our interior to come in

[@elgatoloco1548]

Im in the middle of the same swap. If you dont mind me asking What long tube header brand did you guys go with?

[@TyinAlaska]

Sooo... how's that Chevelle coming along? 😃

[@SalvagetoSavage]

Good! Waiting on interior pieces to come in! Got some updates coming soon!

[@TyinAlaska]

@@SalvagetoSavage wooo!

[@gregcelaya955]

What do you use (brand and type) for painting the chassis?

[@SalvagetoSavage]

We've used Eastwood a lot and haven't had many problems!

[@gregcelaya955]

@@SalvagetoSavage Thank you!

[@donaldyoung9838]

Hey Darn Nice Build I Have A 2003 Chevy Silverado Short Wheel Base It Had A 4.3 It Was Knocking So Pulled It Out Can I Replace It With One Like That Without Any Problems Thanks

[@SalvagetoSavage]

You'd have to make sure that your motor & trans mounts are in the same place

[@donaldyoung9838]

@@SalvagetoSavage 10-4 probably have to make sure that I get the computer an all because I have a different fuel system is that correct thanks

[@rickyallgeyer9254]

Wheres Timmy?

[@SalvagetoSavage]

He moved to another project

[@stevedeez]

LS3 IS 376 c.i. so go ahead with those covers.

[@SalvagetoSavage]

It's not really the size, it's the LSX on them that feels disingenuous

[@brickcity9mm896]

👋🔥👍 Dope 💥💥💥

[@SalvagetoSavage]

Thank you!

[@joeluriarte3263]

more videos of the Chevelle I like those more and I want to see it in action,,,

[@SalvagetoSavage]

We're still waiting on our interior!

[@joeluriarte3263]

@@SalvagetoSavage It's true this number I don't see it well pass me your instagram

[@Hated_Sien]

Wont you need different Rocker arms since you are going from a Beehive Spring to a traditional valve spring? I know on mine, the rocker would make contact with the spring.

[@simpsokay1849]

yellow corvette?, another project?

[@SalvagetoSavage]

It's just in for some maintenance

[@robertjones7695]

What is the plan to replace the torsional strength and lateral compression strength lost by cutting the top hat off the chassis?

[@ExplosiveGarage]

What header’s are you running?

[@mrmiami516]

Do you do outside projects!? 1974 Chevy Nova

[@SalvagetoSavage]

Most of these are outside projects! Shoot us a message on IG or through our email if you're interested in a project!

[@mrmiami516]

Ok! This a scam?

[@realestatehelpsite]

Where's Tim been?

[@SalvagetoSavage]

He moved on to another project

[@abdulkareemrainers3142]

I have a question for you guys. Why do you guys mostly use LS engines? Oh and I rarely see you guys do a full paint job on these hotrod builds🤷🏼‍♂️ curiosity I guess😅

[@stuey7777]

Because they are awesome engines, small, lightweight and produce good HP & Torque. Plus they have probably the biggest aftermarket parts support/options of any motor ever produced.

[@luisfrias1123]

How much does a build like that cost?

[@ritchardposterior262]

ls3 = 6.2 litres = 376 cubic inches.

[@mrspeer8822]

Yeah where's Tim Been This new guy David He seems to be a good Fabricator and welder I just think he lacks Creativity Like the last couple episodes the plain metal Box for the air ride The funky shaped air bag mounts Tim would of done something clever did some bead rolling or something just instead of plain

[@thruitallauto2538]

Not to mention you’ll bust your transmission pump, if torque converter is not seated in the pump

[@SalvagetoSavage]

There's a whole slew of issues! The long way always ends up being shorter than the wrong way when it's all said and done!

[@bosqueboys]

If it’s a 6.2 then it’s also 376 ci

[@SalvagetoSavage]

But it's still not an LSX

[@joshchapman521]

what happend to tim

[@SalvagetoSavage]

He moved on to a different project

[@callumsenftleben8974]

What is happening to ur Sema build

[@kennycherry8961]

That’s not a 6.2L LS3. True LS3 did not have DOD. The 6.2L L9H truck engine did not have DOD ether not sure about the 6.2L L99 engine it may have had DOD

[@thomasstott527]

says you are running a LS3... but you are removing the VVT... as far as i know there was no LS3 ever with vvt... so you may have a L92 or a L99 not a ls3... even tho they are both 6.2 ... there not the same as a LS3....

[@WoopWoopTV]

🤩🤩

[@SalvagetoSavage]

Thank you!

[@willemp6432]

My legs are numb and I find it hard to walk, and now I have needles and pins...I made a big mistake by starting this video while on the toilette at work..20 mins without moving..Tsha..

[@SalvagetoSavage]

hahaha! Thanks for tuning in to our YouPoo channel!

[@willemp6432]

@@SalvagetoSavage 😅

[@morphilmics]

what happened with the delorean??

[@tylertrimsale1259]

Mikey my man respiratory PPE please!