Samsung dryer not turning on - perform System Reset

[@DIYwithMichaelBorders]

Second reset procedure link below. kzbin.info/www/bejne/eYvTpqKQjtyjpdksi=HZ9yjdgSUt8Ec4qP Help support us by buying Merch! teespring.com/stores/diy-raptor-club Visit our Amazon Affiliate store, as an Amazon Affiliate, I earn from qualifying purchases. www.amazon.com/shop/diywithmichaelborders?ref=inf_own_diywithmichaelborders

[@elithomas4076]

Yes,yes,yes! Thank you so very much. This 58 year old lady living alone appreciates your simple instructional help. Right on! Didn't know what I was going to do. Thanks to your video, I was able to continue my laundry.

[@DIYwithMichaelBorders]

@@elithomas4076 Good morning, that’s great to here, and thank you for taking the time to share this. Welcome to the DIY Raptor Club!!!!! We are always here to help answer questions. 😁

[@rhammond71]

Didn’t work. Tried several times

[@DIYwithMichaelBorders]

@@rhammond71 Good morning, that’s a bummer. Do you have any icon’s illuminated on your top panel? Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time. 🧰

[@robertfernandes6709]

I have a touchscreen model, and was shocked and so thrilled when this actually worked! Life saving tip. Checked the breaker, reset it, checked the cord, all seemed good... Light wouldn't turn on when opening the door, and control panel would do nothing. Performed this reset and had zero expectation it would work on the model we have, but it did! Hope it stays working now. Fingers crossed.

[@DIYwithMichaelBorders]

What’s up Robert, Awesome Awesome!!! Thanks for watching & sharing this. 😎👍

[@lexstoker1233]

It worked for me too!!

[@motorcyclelad]

It did not work for my touchscreen

[@Pancho55_]

Holy Cow! It Works! Unplugged it, held each button for 5 seconds and magic! It works! This beer for you! 🍺

[@DIYwithMichaelBorders]

Great to hear and that makes for a good evening ahead. Enjoy your 🍺 😎👍🍺

[@runbuh]

This "one simple trick" is for real, and actually got my dryer back up and running! Thank you!

[@DIYwithMichaelBorders]

Thanks for watching, that’s awesome to hear. Hopefully many stress free days ahead for you. 👍

[@diatramozaloni8498]

My Samsung dryer Model # DV365ETBGWR/A3 ( 2013 model ) was not getting power to the control panel, nothing happened when I pushed the power button. circuit breaker was OK, dryer receptacle has power (230 V. ) ... was ready to start checking door switches, and power button, decided to check out some you-tube vids for disassembly info and parts, thank the Lord, I found this video by Michael B. I am so #$@&%%#@ mad there is NOTHING in ANY of the repair manuals I found, even the owners manual doesn't give this info. This vid was my New-Year's present .. ( today Jan. 1, 2024 ) I cannot find enough words of thanks to Michael for posting this vid. God Bless and keep you Mike !!

[@DIYwithMichaelBorders]

Happy New Year, very kind of you to share your experience. That’s great to hear, getting your dryer back running properly for the new year is a great thing. Let us know if you have any questions.

[@mariaalves1654]

For the love of God this video just saved me from buying a new dryer. I tried to reset it but it didn’t work. I even tried tripping the breaker switch in the basement. Nothing!!!! This time I followed the video instructions only this time I left the dryer unplugged and tripped it from the breaker box again. Went back upstairs- plugged it in and the sound of heaven saving money came on when I hit the power button. THANK YOU!!!!!

[@DIYwithMichaelBorders]

You are welcome, thank YOU! This means the world to us that you would take time on your Friday evening to share this. We are happy to hear you don’t need to purchase a new machine. You can put that money toward something more meaningful. Reach out to us any time. 😎👍

[@900198619]

Thank you SO much for taking the time to make this video! After I used another video's instructions to change the heating element, my Samsung dryer wouldn't turn on. I freaked out, thinking I'd done singing wrong. Your video was a HUGE blessing! God bless you in Yeshua's name!

[@MsABee1]

Totally just worked!! Thank you!! I love that I can get a lot of help from YT!! I’m back today for another reset!

[@DIYwithMichaelBorders]

Hi there, that’s awesome! 😁👍 Thanks for watching, enjoy your Sunday.

[@vanh0ek]

I cleaned the lint catcher, reset the circuit breaker, then tried this reset shown in the video and it worked great. Thank you!

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching & sharing this. Welcome to the DIY Raptor Club. 😎👍🔧🔩

[@carrollwhay6055]

You made me look like a hero, but I still gave you the credit. You saved me a service call fee!! Thank you!

[@DIYwithMichaelBorders]

@@carrollwhay6055 Good morning ☕️ that’s awesome you made it a DIY project. Hey, we both can take the credit and feel good for it…😁 The DIY community is the BEST, we appreciate you taking the time to write us.

[@MikeeH626]

Excellent tip. Mine went out after a second it started. I was worried but followed your tip and it worked. Thank you!

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Great to hear and it means the world to us that you took the time to share this. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@mohammadsijaja]

Amazing!!! Seriously thank you! My dryer stopped working a week ago, called Samsung 3 times and went to Lowe’s to check warranty. Samsung said it would estimate around $500 to get it fixed!!! I did this simple small reset and it works 😂 you just saved this family $500! what’s the reason behind the reset and why would it stop working until it gets reset??

[@CPSC2401]

Hello and thank you for the video. I am just curious what is the hour glass icon that shows on the display of this Samsung washer?

[@DIYwithMichaelBorders]

Thanks for watching, great question. This indicates that a (Timed Cycle) is currently being ran. 😎👍

[@thromo415]

If you’re ever in NH, beer is on me. Thanks man!

[@DIYwithMichaelBorders]

Good morning ☕️ We would enjoy that most definitely! In the meantime, reach out to us any time. 😎👍🧰

[@bassman777]

this helped greatly! after this reset procedure, it didn’t immediately turn on. So I opened the door and and repeated the system reset procedure, then when I closed the door, it turned on. DIY FTW! 🙌🏾

[@DIYwithMichaelBorders]

@@bassman777 Very cool, we appreciate you writing us. 👍👍 to you for making it a DIY project.

[@christinebonebright8703]

Omg! Have an older Samsung that doesn't have a power button. So i pushed the start/press and hold button and the. The pause/cancel button and it WORKED!! THANK YOU!!!!

[@michaelshoop5616]

Thank you so much. You saved me from buying a new dryer.

[@DIYwithMichaelBorders]

Good morning, you are welcome. Thanks for watching, and purchasing a new dryer can wait for another day. 😁👍 Looking forward to 2024, many more helpful videos to come. 🧰

[@rubinsteinway]

Excellent advice for my Samsung dryer. Just wondering if this would also solve a similar problem with the washer. Sometimes the control panel lights get all discombobulated. Thanks.

[@DIYwithMichaelBorders]

Thanks for watching & it will definitely be very similar. Hope all is well. Below are two links to Samsung washer reset procedure videos. kzbin.info/www/bejne/a3PIdWOJfa6na7M kzbin.info/www/bejne/pmq1qKOAbcmprZo 😎👍🔧🔩

[@joeashton3871]

Thanks to your video you saved me a service call and $$$!

[@DIYwithMichaelBorders]

You are welcome, thank you! Money saved is a great thing, especially going into the weekend. 👍

[@brirrodman]

I HAVE A DRYER WITH ONLY ONE BOTTON AND I HAD ZERO HOPE BUT IT WORKED!!! THANK U MY MOM WOULD HAVE BEEN LIVID

[@julievanhuss3405]

I have a Smasung dv42h5200gw dryer and the selector knob is broken, just spins pretty freely on the front of the unit. Is replacing it a simple pop the old one off and snap the new one on?

[@johnstiles7464]

Amazing IT WORKED! now how do I find out WHY it stopped working to begin with???

[@DIYwithMichaelBorders]

Thanks for watching, that’s great to hear. It could be as simple as a power outage that can cause this. Or, it can usually indicate that your control board has entered it’s early stages of failure… hopefully not though. 😎👍

[@andrewcarter9637]

Hello, can I use the circuit breaker to turn off power instead? There’s not a way I can easily get behind the dryer.

[@andrewcarter9637]

Update: I did do just that and it’s working now. Thank you :-)

[@DIYwithMichaelBorders]

Thanks for watching and sharing your experience and follow up, that’s awesome! Great job making it a DIY project. 😁👍🧰

[@jenniferbritzke9887]

You just saved me a lot of headache and hassle! Thank you!!!!

[@DIYwithMichaelBorders]

Good morning, we are happy to help. Enjoy your Sunday with hopefully no headaches or hassles. Thanks for watching. 😎👍

[@jakezornes347]

Hi. I tried this yesterday, and everything worked great! I just tried to turn it on today for another load, and it didn't want to turn on again. Checked the breaker box and did a reset with no luck. Any advice?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Any update? This type of control panel behavior is usually due to the panel itself being in its early stages of failure. Resetting it once or twice will usually get it back up and running and allow you to perform a full cycle however may require an additional reset or two the next time use machine. Replacing your control panel may be the best thing to do. 😎👍

[@RealistNW]

How do you clean out the softener container as mine has plugged up. I really think it is easier to just put a little softener on a damp wash cloth before putting in dryer.

[@DIYwithMichaelBorders]

Great question & we appreciate you reaching out to us. There is a push-to-release tab in most cases located on the inner upper mold of the container. Keep us posted. 😎👍🔧🔩

[@jacquelinelmiller]

Thank you so much for loading this video. I replaced my dryer belt and it was about ready to call for service when it wouldn’t start back up. The reset worked great! Thanks again!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Great to hear you made it a DIY project. A good rewarding feeling at the end of the day. Hopefully many stress-free day to head for you Jackie. 😎👍

[@patrickmichaud7148]

Thank you, your video and advice make me save few hundred dollars.

[@DIYwithMichaelBorders]

@@patrickmichaud7148 You are very welcome, and 👍👍 to you for making it a DIY project. 😁👍🧰

[@krismoomall]

Worked the first time, like magic. It was down a month. THANKS SOOOOOO MUCH:)

[@DIYwithMichaelBorders]

You are very welcome & we appreciate you sharing this. Being down for a month is no fun. Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@terrycaulley4783]

This was our Hail Mary and it worked! Thank you. Any chance you would you know what would cause for this hard reset?

[@ketocrusader3406]

This Worked on the first try!!! Thank you so much!

[@DIYwithMichaelBorders]

@@ketocrusader3406 You are very welcome. 😁👍🧰

[@ajpacella]

I can’t believe this worked. Thank you. Saved me a costly service call

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching. Back up & running is a great thing, let us know if you have any questions. 😎👍

[@ajpacella]

@@DIYwithMichaelBorders your trick worked twice for me but now my dryer has shut down again and this approach isn’t working again. Any thoughts, advice, suggestions? Thanks

[@DIYwithMichaelBorders]

@@ajpacella Thanks for the update, that’s a bummer. It may be time for a new control board.

[@ajpacella]

@@DIYwithMichaelBorders I was afraid so. Oh well. Thanks again.

[@DIYwithMichaelBorders]

@@ajpacella So happy to help. Looking forward to hearing back from you as you work through project.

[@suellenmaforte12]

Didn’t work at all for mine. Wish it did. I’m going to try your other method to see if it’ll work. Mines stuck on “time remaining and Lock”.

[@RebelRacer90]

Our dryer comes on just fine, but it makes a really loud sound when I press start like it tries to start but doesn't do anything. Belt has just been replaced, and this reset sadly didn't help. Any advice?

[@DIYwithMichaelBorders]

Thanks for watching, welcome to the DIY Raptor channel. Let’s get this figured out Crissa. Since the belt has been replaced, chances are it’s the motor. Can you be more specific on the sound. Is it a grinding sound or more like a whistle/screeching sound? Screeching can be your internal drum rollers. Either way, we have attached a few links below that will help. 1. Replace dryer motor kzbin.info/www/bejne/Y4jXZHeneJKYqJY 2. Replace dryer rollers kzbin.info/www/bejne/d3uQqZ6tec-lnqc Let’s start there, please keep us posted.

[@barefoothippie6318]

I need help!! Trying to make my dryer open the opposite way it is now, I got everything taken apart and now it says to rotate the holder glass (big round steel) and I am lost!! It is the same model as this one I believe

[@DIYwithMichaelBorders]

Thanks for watching, any update? With ours, there are two screws that secure the door mount to the washer frame. Removing these two screws will allow you to carefully pull door and mount away from washer. Next, on the opposite side, you need to remove the door lock mechanism that secures to washer. Swap that part to the opposite side and then secure it to washer. Finish up by securing door and door mount to side of washer that the door lock mechanism was just removed from. Keep us posted and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰

[@chrislarson5992]

I've watched all your dryer repair vids that I can find and still won't turn on. DV50K7500EV - tried this reset, replaced Thermal Fuse, Control Board, and both Control Panel on front and Selector Panel. All power tests show that it's getting power to the boards but still won't turn on. What else is there to try?

[@DIYwithMichaelBorders]

We really appreciate that, any update? By chance, did your home experience a power outage in the last few weeks? Or…🤔…was there severe weather that moved through your area during times that you were away from home or sleeping? Any power outages or temporary power interruptions due to weather, can cause havoc to your electronics within the system. Since you have replaced several parts, it’s possible that your power cord was damaged. You may need to replace power cord. Please keep us posted. 🧰

[@chrislarson5992]

No, we haven't had any power interruption and the power is testing full 240 from the outlet to the machine.

[@DIYwithMichaelBorders]

@@chrislarson5992 Thanks for the update. At this point, if it was our machine…we would likely remove a few panels and double check that we didn’t forget to connect all electrical connections back together. It’s unlikely that you didn’t reconnect electrical connection points while you were installing new parts, however… It happens … ask us how we know … 😜

[@chrislarson5992]

Ha! I totally get that. Mistakes do happen, unfortunately this isn't the case either. I've had two other people check connections, inspect wires for kinks and damage, and double check power flow. Nothing has come from that either. Totally stumped! 🫤

[@DIYwithMichaelBorders]

@@chrislarson5992 Awesome, that alleviates that as an option. 😁👍 Do you see any damage to power cord? Your dryer is electric, not gas…correct?

[@Daveduncan49]

Mine is 240 electrical power cord and outlet. Is procedure the same?

[@DIYwithMichaelBorders]

Thanks for watching, it is indeed. Let us know if you have any questions and hey if you’re into crypto investing, join or DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@maxlovins]

guess i am one of the few this didnt work for. you made mention of another video, can i get the link for it? thx in advance

[@cmflow69200]

Hey thanks for your video. I tried it but maybe that's not the issue I'm having. I can start the machine only if I wiggle the button on left corner. I just afraid that it's going to out and I'm not going to be able to use my machine. Any suggestions are greatly appreciated. Thanks in advance.

[@DIYwithMichaelBorders]

Good morning ☕️ it’s likely that either your Control Board is malfunctioning or the Control Push Button Panel is malfunctioning. Most people will replace Control Board first however that will be personal preference. Please keep us posted. 🧰

[@reynaldocabrera727]

Thanks very much lfix my dryer your videos help me alot .

[@DIYwithMichaelBorders]

You are very welcome, we are happy to hear this. 😁👍🧰

[@wesleyburns8]

Does this work with all Samsung dryers? My model is dv50f9a6evw/a2

[@cha4mz136]

What would i do without youtube. Thanks man.

[@DIYwithMichaelBorders]

Thanks for watching & sharing this. KZbin is definitely awesome! 😁 Welcome to the DIY Raptor Club. 😎👍🔧🔩

[@JimGrantham-p6x]

Wtf, it worked. Crazy you tube at it again. Thank you

[@DIYwithMichaelBorders]

@@JimGrantham-p6x You are welcome. 👍🧰

[@lamsterdam9302]

Im going to try this tmrw, my dang dryer been down for months. It has happened before and after a while it'll start working again by itself. My question is, what caused it to stop working in the first place and why?

[@DIYwithMichaelBorders]

Good morning, thanks for watching. A few things can cause this, most common items below. 1. Faulty control board 2. Loose or damaged wire connection 3. Unit plugged in while home experienced a power outage. Power surges can be extremely bad for units. Looking forward to hearing back from you. 😎👍

[@psawat6963]

I had to turn the dryer off early because I needed to leave the house for an hour. When I came back, it didn’t respond at all. I searched Samsung website and it said this might trigger the overheat protection system. I tried your trick and check the power breaker and everything but still didn’t work. Any suggestions?

[@DIYwithMichaelBorders]

Thanks for watching, any update? Unplugging it for a minimum of 30 minutes will likely be the best fix.

[@MC-wb2it]

May i know the model of this dryer because its the same with ours and not spinning

[@DIYwithMichaelBorders]

Good morning, thanks for watching. This is a: DV45K6500GV/A3 Let us know if you have any questions and hey if you’re into crypto, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@kmil1967]

Well my power button worked before I worked on the thermal fuse and thermostat replacement bc ohm meter said heater element was good yet numbers for above was less than 1 or said something on meter box. So my problem was it would run but not dry clothes but now I did check a lot took apart now put together and my display will not light up or turn on? Any suggestions? **Update 10/15/21 I actually forgot that I had been into the PCB and one wire was unhooked, my dryer is now fixed and running great 👍🏼

[@artbyangel4916]

Hey I replaced the heating element and all internal vents but still not heating haven’t tried this reset but how do I know if the thermostat needs to be replaced also? Thermostat has continuity

[@spencerbeck07]

Will this work if I have a error code 9c1 on my dryer?

[@fbcreativemedia]

if that does not work, can you recomend another option?

[@DIYwithMichaelBorders]

Good morning Dave, thanks for watching. Below is a link to a video showing a 2nd reset option. kzbin.info/www/bejne/eYvTpqKQjtyjpdk Keep us posted. 😎👍🔧🔩

[@gabibbo_007]

In Italy… this saved my ass and trouble calling customer assistance. Did it with a EUR dryer and it worked!!!! BTW: my issue was that it was stating that the door was open but in reality was closed!!!

[@DIYwithMichaelBorders]

So happy to help, thanks for watching & sharing this. Us DIYers need to stick together!!! Thanks again for sharing your experience. 😎👍

[@AudrileeOrtega]

I still need help, the Filter icon keep popping up even tho I already cleaned it how can I get it to work ?

[@DIYwithMichaelBorders]

Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. Any update? Performing the alternative system reset may be what to do next. Below is a link. Keep us posted. kzbin.info/www/bejne/eYvTpqKQjtyjpdksi=5foZuVE7pk6lKHMM Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@ziplock77]

Thanks! Worked for me! Once again, wife thinks I’m a superhero.

[@DIYwithMichaelBorders]

Hey what’s up Charles. Thanks for sharing this, awesome job making it a DIY project. Being a superhero for your wife is awesome!!! 😎👍

[@diane231]

First thing I tried, and the system reset absolutely worked for me! Thank you! I'm curious though, why it happened?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. That’s awesome to hear you’re back up and running. This can happen every now & then. Causes that lead to this are: 1. Power outage 2. Power surge 3. Cord not 100% plugged into outlet & more... We hope you have a great day Diane.

[@rickchurch1536]

Tried Both. Still didn’t work. Less than a year old Samsung Dryer. Any other solutions to not turning on?! Thanks in advance!

[@DIYwithMichaelBorders]

Thanks for the update & the next thing most do is go right to replacing the main board located on upper left of machine. Another step to do is inspect control panel internal wiring. Removing the top cover will gain you access to the back of panel where you can inspect panel wiring. Check for any signs of overheating, melting, corrosion at connection points, or loose or disconnected connection points.

[@raazalam8371]

I did try just like that but still power not turn it on what should I do

[@DIYwithMichaelBorders]

@@raazalam8371 Thanks for watching, any update? You may want to perform this reset procedure a second and third time… As it may take additional reset procedures to fully reconfigure your machine. 👍🧰

[@mtecnologia2]

Thank you my dryer didn’t start to spin, I can’t see the when I start the door lock didn’t lock 🔒 the door and the process didn’t start! I have on dash the number and time simbol

[@DIYwithMichaelBorders]

Good morning ☕️ thank you for sharing. Please let us know if you have any questions. Many more helpful videos to come. 👍🧰

[@juandavidc.6915]

Thanks 👍 But I cannot select the temperature level. The button is stuck in High temp. what does it could is happening? Thanks!

[@DIYwithMichaelBorders]

Thanks for watching & this is more common than you think. You might have a loose connection point leading to intermittent electrical power. Have you performed both reset procedures? Please keep us posted. 😎👍🔧🔩

[@jyotsnapatil7370]

Thank you for this tip, you saved us ❤❤

[@DIYwithMichaelBorders]

@@jyotsnapatil7370 You are very welcome, we are honored to help. 😁👍🧰

[@SouL2tha]

This worked for me yesterday but today now it won’t turn on again and this no longer works. Control board issue? Should I attempt to replace before just buying a new one. Dryer is about 9 years old.

[@DIYwithMichaelBorders]

Thanks for sharing this, any update…?…did a second or third reset work? It’s likely that the Control Board is in it last days however maybe not. Below is a link to our video showing a different reset procedure than the one showed here. kzbin.info/www/bejne/eYvTpqKQjtyjpdk Reach out to us any time and hey if you’re into crypto trading, be an early participant in our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰

[@hnew4u972]

Woohoo this worked for me!! Thank you!!

[@DIYwithMichaelBorders]

Thanks for sharing this, that great to hear. An out of commission washing machine is not a good thing. 😁👍

[@richsidhu639]

Just tried this as my dryer would not power up. Worked perfect. Thank you!!

[@DIYwithMichaelBorders]

You are very welcome, thanks for watching. Great to hear the reset got you back up and running. 😎👍

[@kaemack44]

This didn't work for me. I can hear a click like it wants to start but it doesn't. Panel says drying and cooling at the same time. Any ideas?

[@DIYwithMichaelBorders]

Thanks for watching, a second or third reset procedure is recommended. If still not working, it’s likely you have a faulty Control Board.

[@azulcrema1O]

Is always a pain in the butt to open my washer almost like it gets stuck. Any ideas how to fix this?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. There are screws on inner portion of door that secures latch. It’s possible that the screws are slightly loose allowing the latch to wander and get stuck inside the washer portion latch. A friendly tightening of the screws to secure that door latch may help.

[@cupOcats1111]

Just worked like a charm for me 🎉! Thank you so much!

[@DIYwithMichaelBorders]

You are very welcome, happy to help. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@tomthebeekeeper8481]

My start pause button doesn’t seem to work like it used to. Every function seems to work but the dryer doesn’t start. Can I just replace the switch under the button? Thank you in advance for your help!

[@DIYwithMichaelBorders]

Thanks for watching, depending on your model, it may be an option. Some options are designed in a way that you need to replace the full inner electronic board. 😎👍

[@alonzoboyd8636]

What does it mean if ur dryer runs few minutes n then shuts off?

[@DIYwithMichaelBorders]

Thanks for watching. A few things can cause this however the most likely cause is a blockage/clog somewhere along the duct/exhaust.

[@babiboy181]

Hey didn't work for me. Where can I find that additional video you had mentioned for extra assistance

[@DIYwithMichaelBorders]

Thanks for watching, below is a link to a second reset procedure. kzbin.info/www/bejne/eYvTpqKQjtyjpdksi=HZ9yjdgSUt8Ec4qP 👍

[@babiboy181]

@@DIYwithMichaelBorders thank you for the quick response. I will give this a try a little later. Thanks again

[@DIYwithMichaelBorders]

@@babiboy181 We are happy to help.

[@salvatore316]

Is there a way to change the music the dryer plays when its done?

[@DIYwithMichaelBorders]

Thanks for watching, there is indeed however will require a software update via drive-mechanism located on top of unit. However if you’re interested in turning music off, you can simply press and hold the button for 3 seconds. 👍 Let us know if you have any questions and hey if you’re into crypto, join our newly launched DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰

[@vickiadams-berger3338]

What do I do if the no music light is on & I don't know how to turn it off so that the dryer will play the music at the end of cycle? @@DIYwithMichaelBorders

[@DIYwithMichaelBorders]

@@vickiadams-berger3338 Thanks for watching, great question. You will need to press-and-hold the (Sound) push button for 3-5 seconds until you hear the beep. This will configure your machine to play the end-of-cycle jingle. 😎👍

[@geecali8356]

Does this work with electric dryers? It didn't for my service call. I had to give the customer one of my dryers because it wouldn't light up after I took it apart.

[@DIYwithMichaelBorders]

Thanks for watching & it does indeed. This reset procedure is standard amongst all manufacturers. 😎👍

[@JDubfishing79]

Any thoughts on why my Samsung dryer is stuck with the cooling sensor on?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. It may be as simple as performing a system reset. Have you tried the second option...?...below is a link. kzbin.info/www/bejne/eYvTpqKQjtyjpdk Keep us posted. 😎👍🔧🔩

[@tone1245]

Does this work for all Samsung dryer models?

[@DIYwithMichaelBorders]

Thanks for watching & it does indeed. Keep us posted, us DIYers need to stick together! 😎👍

[@markcarroll2112]

Thank you so much it’s just worked!

[@DIYwithMichaelBorders]

@@markcarroll2112 You are welcome, we are honored to help! 😁👍🧰

[@rhammond71]

Anything else you can suggest. This didn’t work for me. Tried several times

[@DIYwithMichaelBorders]

Are any of the icons illuminated on your screen?

[@rhammond71]

@@DIYwithMichaelBorders Thanks for your reply! Unfortunately. It looks dead in the water. No icons, nothing. To give more context - one evening I put a medium load of whites in the dryer & went to bed. The next day, when I removed those items to place another load in to dry, I got no response. I did see the circuit breaker had been tripped (as I first checked the plug to try and understand why I wasn't getting any power. I turned the breaker off, then back on - but no response. Found your video and followed the steps to unplug the unit (with the circuit breaker off), leave it for more than 30 minutes, hold down the power button for 5 seconds, hold down the start/pause button for 5 seconds, secure the plug into the wall again...but still nothing. I tried this method several times. I do have the 4 prong outlet.

[@DIYwithMichaelBorders]

@@rhammond71 Thanks for the follow up. Likely parts are a faulty Control Board or Control Panel.

[@jackhyer6765]

Literally saved my life. Well done 👍🏽

[@rubinsteinway]

IT WORKS! How on earth do you figure out stuff like this??

[@DIYwithMichaelBorders]

Thanks for watching & sharing this, we are happy to hear the reset was completed & you’re back up and running. Us fellow DIY’ers need to stick together! Hopefully many stress free days ahead for you. 😎👍🔧🔩

[@jp3eku]

he read the manual! lol

[@rubinsteinway]

@@jp3eku Yeah, but I threw away the manual!

[@RealistNW]

Really surprised, a 120 volt dryer. I would expect that kind of plug with a NG or propane dryer.

[@DIYwithMichaelBorders]

Thanks for watching Ron, odd for sure...

[@cajuncoinhunter]

A friend of mine in Florida sent the link to this video out in "Our Gang" email that's a term we use for 10 of us old fogey's LOL......... That quick fix helped him out a lot ...... I'm a electronic tech and in the near future I'll be repairing these circuit boards in these Smart devices ......

[@ryk1265]

If your dryer is not gas heating, how does 120v heats up your heating element let alone not trip your breaker considering both washer and dryer are plugged in the same receptacle?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Our dryer is gas & uses the standard receptacle. If it was electric, it would require a 220 power cord plugged into a 220 outlet. Hope this helps. 😎👍

[@Blackpanther_risen]

My Samsung dryer has no heat and spins (with power button on an off) when I close the door and the control panel turns off by itself. Any helpful suggestions on what is wrong? Thanks in advance. This will be my last Samsung sets......obviously Samsung has big issues based on how many similar videos on KZbin !!!

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Most common part that leads to this is a faulty Door Lock mechanism. Below is a link to our video replacing the Door Lock mechanism on an LG washer however it will hopefully give you a better idea with what’s involved with your dryer. kzbin.info/www/bejne/m6iWf5mdg7Car7c Please keep us posted on your project. 😎👍🔧🔩

[@nebabreu424]

My dryer samsung dv42h5000ew/a3 turns on, but when I press start it turns off. Help me please!!!!!

[@DIYwithMichaelBorders]

Thanks for watching, any update? Have you performed this reset a second or third time over a day or two?

[@kaydeenothing9772]

This did not resolve our issue. I followed the instructions exactly. I plug it in and everything seems like it's working. We go to start the load and hear a faint click but the drum never starts turning. I'm out of hope I will get this fixed.

[@DIYwithMichaelBorders]

@@kaydeenothing9772 Thanks for watching, any update? Have you attempted this reset procedure a second or third time… it may take a few reset attempts to fully reconfigure your system.

[@kaydeenothing9772]

@DIYwithMichaelBorders We will be attempting to work on it today. We are going to see maybe if it's the belt at this point. I don't see a belt wrapped around the top of the drum and I thought one was supposed to be there to help turn the drum. I sincerely very much appreciate your follow-up. That was amazing of you to do that. It's frustrating having this issue and not being sure how to resolve it.

[@DIYwithMichaelBorders]

@@kaydeenothing9772 We are honored to help, no joke. If it helps, below is a link to our video showing replacement of belt as well as rollers. kzbin.info/www/bejne/d3uQqZ6tec-lnqcsi=bq4EIp3QRRpyW_fQ 🧰

[@witdagreeneyz]

Will this work for dryer not heating. I’ve replaced element and all fuses but still no heat 😢

[@DIYwithMichaelBorders]

Thanks for watching, it’s very possible. Keep us posted. 😎👍

[@witdagreeneyz]

@@DIYwithMichaelBorders it did not work. Ohms reading is 10.2 so element is good. I left the element out so that I could see if it’s warming when running and it’s ice cold. Am I missing something?

[@DIYwithMichaelBorders]

@@witdagreeneyz Thanks for the update, is there any signs of damaged wiring?

[@witdagreeneyz]

@@DIYwithMichaelBorders one of the wires connecting to the thermal fuse on the element looked warped. I repaired it but am wondering is it the problem. What voltage should it read?

[@DIYwithMichaelBorders]

@@witdagreeneyz Thanks for the follow up, a warped wire can be due to overheating. This can definitely be the cause however we won’t know for sure until a test cycle is ran.

[@drewwestlund]

All worked! Yet when it runs it’s cycle it turns off about 30 seconds in and I have keep doing this… any help??

[@DIYwithMichaelBorders]

Thanks for watching, that’s a bummer. At this point, it’s likely that your control board is in its early stages of failure and will soon fail completely sometime over the next month or two. Replacing control board will hopefully fix issue. Keep us posted and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰

[@redsti7751]

Will this work if my samsung dryer enters demo mode?

[@DIYwithMichaelBorders]

Thanks for watching & it should, if not...we recommend trying the 2nd reset option provided. 😎👍🔧🔩

[@saqeeb9000]

Any way to fix dryer not heating up. It's 220 v

[@JonMI6]

Did both methods and they did not work. Replaced the control board and that didn’t work. Any suggestions?

[@DIYwithMichaelBorders]

Thanks for watching, that’s a bummer. Is your machine illuminating any icons on screen or fault codes?

[@JonMI6]

@@DIYwithMichaelBorders nothing. Control panel will not turn on but the door light does

[@DIYwithMichaelBorders]

@@JonMI6 Thanks for the reply. Did you purchase OEM control board or aftermarket? Every now-and-then you come across an aftermarket board that…well…just doesn’t work… If you have ensured all electrical wiring is A-ok, next part to replace your panel itself.

[@JonMI6]

@@DIYwithMichaelBorders Going to try and replace the display panel next. If that doesn't work, probably will have to call Samsung support for repair

[@DIYwithMichaelBorders]

@@JonMI6 We appreciate the follow up, we are standing by your side till the end! 😁👍

[@Zell2020]

I have the touch screen model of the dryer, and i'm not sure if it works the same way. Never knew there was a problem it just literally stopped working, not mid cycle just a few days ago it worked now it doesn't.

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. By chance, did the reset procedure help?

[@asmuseggert796]

@@DIYwithMichaelBorders I have the touch screen model as well and out of the sudden it did not turn on anymore. Unfortunately the reset does not work and the other 30 second reset option in your other video does not work either. Any idea on how to reset the touch screen model? That would be highly appreciated :-) Thank you.

[@DIYwithMichaelBorders]

@@asmuseggert796 Thanks for watching & welcome to the DIY Raptor Club. Double check that the electrical cord/plug is firmly secured into the outlet and not loose. A loose connection can cause electrical arcing/surges and can lead to damaging the control panel.

[@Fummins139]

Didn’t work for me…..I just get no start and a clicking sound from the push button panel. Any of you guys have a remedy idea?

[@hectorarras3090]

Simple trick, but is real , love it, thanks a lot!!!

[@billybudd4263]

What is the second thing to try when the system reset didn't work?

[@DIYwithMichaelBorders]

Thanks for watching Billy, a link to the second option is below. kzbin.info/www/bejne/eYvTpqKQjtyjpdk 😎👍

[@ScrapFatherScrapSon]

So my dryer won’t heat but I don’t have an error code? Any ideas?

[@DIYwithMichaelBorders]

Thanks for watching & it’s very possible that you have a faulty Thermostat or Coils. Below are helpful links showing replacement of these parts. 1. Replace Thermostat kzbin.info/www/bejne/r5TMmYGIrNV6l9k 2. Replace Coils kzbin.info/www/bejne/jGbCkmRrZd2haq8 Keep us posted. 😎👍🔧🔩

[@np2631]

My washer turn on but give me 4C I turn off and star the cicle again any ideas thank you

[@DIYwithMichaelBorders]

Thanks for watching & we appreciate you reaching out to us. The 4C related to water blockage. Below is a link to our video showing how to clean the pump filter. kzbin.info/www/bejne/iZ_ZkGWlbd99i7s Keep us posted. 😎👍🔧🔩

[@hanuykim]

Check the water supply and see if you're actually getting water. If you're getting water then turn off the supply and open them valves up and see if anything blocking it. If those all are clear related parts for it could be the valves itself or pressure sensor or main board. Hope it helped.

[@DIYwithMichaelBorders]

@@hanuykim Good morning & thanks for sharing this. Any & all helpful info is greatly appreciated. 😎👍🔧🔩

[@Saturn-sd8ht]

I tried to power it down and although the lights go out and it appears it's powered down, the dryer keeps running. It obviously stops when I unplugged the dryer but then after performing the reboot, as soon as I plug it in again the dryer just starts spinning again. Any idea what I could do?

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. The most common cause for this dryer behavior is a faulty Door Switch. Please keep us posted on your DIY project. 😎👍🔧🔩

[@doza1493]

Just saved me hundreds of dollars

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Awesome, nothing better than completing a DIY project and saving lots of money in the process. Let us know if you have any questions. 😎👍

[@haley6715]

What about if the Samsung dryer powers on but when pressing start cycle it never starts

[@lisaw861]

Did u figure it out? Currently having the same issue as we speak…the time even goes down a couple minutes before it plays like it’s finished

[@DIYwithMichaelBorders]

Good morning, thanks for watching and sharing this. You may need to remove your panel and inspect the backside where the electrical wiring and connection points are. Look for any damage wires, melted or corroded wires and connections, as well as large amounts of dust buildup on the electrical connections. Or…it may even be as simple as just a loose connection on the backside of your selector button panel. Keep us posted.

[@DIYwithMichaelBorders]

@@lisaw861 Hi Lisa, I just responded to Haley and I wanted to copy and paste that comment to you just in case you missed it. Good morning, thanks for watching and sharing this. You may need to remove your panel and inspect the backside where the electrical wiring and connection points are. Look for any damage wires, melted or corroded wires and connections, as well as large amounts of dust buildup on the electrical connections. Or…it may even be as simple as just a loose connection on the backside of your selector button panel. Keep us posted.

[@user-us6eo1jy1t]

Hey please help my washer Samsung it gets the power than I starts it it’s weighing and keep weighing but won’t start please help sir 😢

[@DIYwithMichaelBorders]

Thanks for watching, any update? Have you performed this reset procedure?

[@fr9714]

did not work on my Samsung dryer. But it uses a 3 prong power cord and is more heavy duty. It is on 2 x 30A circuit.

[@DIYwithMichaelBorders]

Thanks for watching, any update? Below is a link to a different reset procedure. kzbin.info/www/bejne/eYvTpqKQjtyjpdksi=MT_NsXqCc7pwetTC 🧰

[@fr9714]

@@DIYwithMichaelBorders thanks. But that did not work either. I opened a case with Samsung. It's less than 1y old. Even my previous Samsung dryer and washer had problems. Microwave too. Phone too. I think Samsung brand is crap. I will not buy Samsung in future at all. It's just cheap crap

[@DIYwithMichaelBorders]

@@fr9714 We appreciate the follow up, looking forward to hearing back from you.

[@AyeeLito]

My dryer turns on but when I press the start button it blinks dryer I checked if it was clogged it wasn’t it just won’t start when I press start but it turns on

[@DIYwithMichaelBorders]

@@AyeeLito Thanks for watching, any update? It may just require an additional or two system resets. If that doesn’t help, it’s likely that your control board has malfunctioned. Keep us posted. 🧰

[@AyeeLito]

@@DIYwithMichaelBorders I found out the reason the other day my dryer belt popped

[@DIYwithMichaelBorders]

@@AyeeLito Thanks for sharing. If it’s any help, below is a link to our video showing replacement of belt as well as rollers. kzbin.info/www/bejne/haCtmGumh5ebqrcsi=hbmXbXiNsr5F6yL0 😎👍🧰

[@zms3377]

How do I cacel cool air fuction please?

[@DIYwithMichaelBorders]

Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Any update? Depending on your model, it should be as friendly as pressing and holding the button for 3-5 seconds until you hear the un-program tone. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@zms3377]

DV80TA020AE/EU

[@zms3377]

The dryer comes on and the drum turns but it doesn't collect water in the tank. The cool air sign which looks like an * is on all the time even though the dial is not on cool air program.

[@DIYwithMichaelBorders]

@@zms3377 Thanks for the additional info. In that case, you will need to go to the settings and disable (Cool Air Mode). Please keep us posted.

[@Alwayzblessed36]

I turned my dryer on, turned in to quick dry, pressed start and it immediately shut off and wont cut back on. I hope this works