Samsung oven not heating properly..

[@atranimecs]

wow he speaks to every possible point of failure. awesome....ive been trying to trouble shoot, thought it was the igniter not getting hot enough but think its probably the thermostat.....i hope to god its not anything else because $30 is parts is easy but gas regulator or motor replacement...you might as well replace the whole oven...

[@emptyheadbiden8698]

If you have any appliances made by samsung do like i do take it out of the house and run over them with a track loader. It will save someone else from possibly buying this piece of shit that someone fixes and trys to resale.

[@robertpapps3618]

Very informative, thanks much!

[@rogerenrriquez288]

Good Jobs. You are good parner... thanks for your help. God bless you.

[@hameedwafaAFG]

Thank you for following me ✌️🤗

[@theusconstitution1776]

I had the same problem I pulled that little motor out of the back, pulled the front bearing off and the rear bearing off lubricated it cleaned it and lubricated it put it back together and it’s been a little more than two years and it’s fine still took about half 45 minutes half an hour to complete that repair😁😁😁

[@varpcplus]

What little motor? What is the motor for, please?

[@maxbluto]

Very helpful, thank you!

[@theusconstitution1776]

It’s highly doubtful that that control board has failed. If the convection fan motor doesn’t run that control board does not know that it isn’t running and it not running has no effect on that control board. Just like if the bake element was burned out, it wouldn’t affect the control board.😳

[@jrocha6511]

Great Job !!! What do you charge for Service Call there in Canada ? I am in Massachusetts in US and i would like to start with washers & Dryers to learn .i see repair companies reanger from $99-169 per flat rate call... take care

[@hameedwafaAFG]

Sorry for late reply but We have different charges and rate that excludes outside of the city rate .

[@robbykalinowski8886]

He didn’t even select the right function for the convection fan to run he put it on regular bake and proceeded to test the fan of course it’s not going to work if your not using the correct setting

[@BIGBOOTYSLAPPAA]

I thought the same thing lmao

[@thenotoriousfig]

Exactly! I thought something was off.

[@joanneschultz-ferguson4430]

What is the meter that you used to check connectivity?

[@hameedwafaAFG]

I use couple different once . I like amprobe or Klein tool multimeter

[@jagboy69]

JUNK appliances. Mine has been a POS since it was 3months old. Samsung makes great phones, just avoid anything they slap their name on that's not a phone or TV.

[@hameedwafaAFG]

Totally agree😅

[@gjchannel7620]

how to exit demo mode in this range？

[@mariarodriguez3882]

Hace dos meses compré una estufa Samsung y ya tiene bolitas de aire en el vidrio, la están haciendo de mala calidad

[@hameedwafaAFG]

Sorry I didn’t understand your comment . Thank you!

[@Mr.Alwaysright-z8q]

It took mine two years to go all the way out.

[@mohnewyork1082]

How you conclude the control board is defective

[@hameedwafaAFG]

Because temperature sensor checked ok , I was not getting any power to bake element. Replaced control board last week tested ok . Service completed .

[@mohnewyork1082]

@@hameedwafaAFG I didn't see you make any measurements for power

[@hameedwafaAFG]

@@mohnewyork1082 I did it . Did not get it in video . Next time I have my co worker with me I could ask him to hold the camera . Thank you for watching .

[@jrocha6511]

Games , R Thank you for the Response !! Keep up the Great Work much appreciated

[@hameedwafaAFG]

@@jrocha6511 Thank you ✌️

[@lukek6492]

I disagree.... first ... I'd be checking if the fan is getting electricity. If it's not getting electricity...then... you have a bad board ... But to assume it's a bad board and bad motor is wrong. And if the fan was "seized" you wouldn't be turning it . Apply direct power to the fan see if it works... if it doesn't it's a bad fan. If it spinns... bad motherboard.

[@brahmaistrash.indiaisatoil5292]

Salam brother, when i click on bake, the top element works and no heat on the bottom, and my fan works. Do you know what could be doing it ?

[@hameedwafaAFG]

Walikum Salam . On Samsung ovens I have seen bake element is the problem %90 of the time . It’s hidden and you can work on it from the back .

[@brahmaistrash.indiaisatoil5292]

@@hameedwafaAFG thank you so much for the tip.

[@hameedwafaAFG]

@@brahmaistrash.indiaisatoil5292 you are very welcome. If you have a multimeter and know how to use it I can help you do some diagnostic before replacing any parts 😀

[@brahmaistrash.indiaisatoil5292]

@@hameedwafaAFG i will keep that in mind and that's so kind of you. Mine is still under warranty so I will just call the manufacturer.

[@pascalplourde3620]

I'm sorry to tell you this but you are not a technician but rather a parts changer.Having been a technician for several years I VERY MUCH doubt that the board is defective. And even if it were defective it would only be the relay that would have to be changed and not the board. But in this case it is a case of a defective motor which, even, could be dismantled and cleaned which would put it back into operation. Or else change it which would remain affordable. I pity your customers, what a waste with impostors like you. By the way, nice haircut ;)

[@joeanderson418]

I have the same stove but mine says cooker on but stove is turned off and has no heat

[@hameedwafaAFG]

Check your breaker switch