Sanlida Noble Recurve Bow Review

Рет қаралды 8,003

Күн бұрын

Review of the Noble Recurve Bow Kit from Sanlida Archery.
===
Follow me on Facebook: / nusensei
Twitter: / nu_sensei
Instagram: / nusensei

Пікірлер: 35

@GaveitagoRC 11 ай бұрын

Awesome video. Watching your genuine reaction to shooting the bow for the 1st time was great. It's testimony to how fun archery can be.

@William.N 11 ай бұрын

Really liked seeing your reactions to your first shots!

@notRuger 11 ай бұрын

This particular bow is very popular in Indonesia due to price and availability since it comes in many sizes and draw weights. It looks nice and works nice too.

@jonathansullivan7675 6 ай бұрын

Thank you. My sons have all expressed interest and even a bit of talent in Archery, but with most things, who knows how long it will last. It's nice to know I can buy entry level like this and not be holding them back.

@worldtraveler8372 3 ай бұрын

I really enjoyed this video of your raw while talking to your student! I was actually smiling and very attentive to everything

@peterreece6547 11 ай бұрын

You’ll have to get Sjef Van Den Berg to shoot it😂 He has a vid out there shooting the Core pulse similar to this bow, I saw that you had a comment on that vid. Being a poor pensioner the Core Pulse riser and Cartel limbs is what I use in my back garden range of 19 yards. Stick in there young man and keep your vids coming.

@357Franknitty 8 ай бұрын

How would you compare this to the SWA Spyder? One thing I like is that the Spyder does have higher draw weights for if you do decide to keep it as you progress in archery.

@easterneagle5 11 ай бұрын

Hey @Nusensei, regarding this basically just being a Samick Sage, could you check if your limbs from your SS are interchangeable with this? If they are, then this is basically the new, "newbie friendly," recommendation I'll have for anyone just getting into the sport, and it means that you'll be able to pick up new SS limbs if people want to work their way up in weight.

@peterxyz3541 11 ай бұрын

I use 125gn points on my 500 spine Victory, full length on my 32lb limbs.

@clee5653 11 ай бұрын

I like they offer various lengths for the riser , too bad the highest poundage available is a bit low. Now I am considering buying one and swap Sage limbs on it.

@popcorngenerator1925 11 ай бұрын

To be fair, no beginner is shooting over 42#

@clee5653 11 ай бұрын

@@popcorngenerator1925 Assuming a cheap bow has to be a beginner bow is ridiculous and consumeristic.

@NUSensei 11 ай бұрын

This is specifically marketed as a "standard beginner and intermediate" bow by Sanlida.

@michaelc3416 10 ай бұрын

As it is marketed primarily as a beginner bow, I would assume they believe that not many new archers will be well served by a bow with a draw weight exceeding 42#. And then again, that may be what they feel comfortable that the riser can safely handle. From what I gather, the limb pockets are plastic, and I'm unsure of the strength of the inserts for the limb bolts. So I can't say that exceeding their max weight would be prudent. It may work fine up to 50ish pounds. Then again, it may simply explode... maybe on the first full draw, maybe on the 427th... Just sayin.... It may be for a very good reason that they only offer it in draw weights up to 42#... 🙅‍♀

@AmJusSaiyan 3 ай бұрын

I bought one at 70 inch, 40#... think I can hunt deer with it?

@xxuncexx 3 ай бұрын

Only if you can shoot accurately

@bqoutdoors2334 9 ай бұрын

Are the limb pockets plastic or metal

@fahlvfaust677 7 ай бұрын

Hard plastic

@peterxyz3541 11 ай бұрын

Next vid: turn it into an Olympic bow 👍

@juliuspilijevas7868 11 ай бұрын

Where can you get the brace height information? It’s not written in the instructions booklet. I have this bow in 70” 30lb.

@michaelc3416 10 ай бұрын

You are correct. It's not listed in the manual for my Sanlida longbow either, although on their website they do suggest 7-8" for that bow. For the Noble the brace height varies with bow length, from a low end of 5.5" for the 48" bow, to 9.5" for the 70" bow. Mine is a 68" and they recommend 8.5-9.25". I found it on one of Sanlida's site pages but it took a google search for the key words, "Sanlida Noble recurve bow brace height" to locate it as it wasn't on the normal product page that I could see. Must be buried somewhere else on their site, but it is listed.

@michaelc3416 10 ай бұрын

See my earlier comment above.... Just noticed after posting that you specified yours as a 70". For the 70" they recommend a brace height of 8.75 - 9.5".

@juliuspilijevas7868 10 ай бұрын

@@michaelc3416 Thank you very much

@lubossoltes321 11 ай бұрын

limb pockets are plastic right ?

@UTxTheArchangel 11 ай бұрын

Something would have to go so wrong in production to mess up a Sage clone. Not surprised Sanlida has their own take on the model. Nice review.

@staffordsanpei7804 11 ай бұрын

It does look like a sage.

@jeremiahhelg 11 ай бұрын

Teaching the newbies right by omitting the arm guard 😂

@michaelc3416 10 ай бұрын

Yep. Good way to break bad bow arm form habits early on. Nothing like a sharp string slap to remind one how NOT to do it! 🤣 But yeah, overall a good beginner package, but maybe would have been better for the complete noob if they had included an arm guard. How many brand new wannabe archers will buy this bow thinking archery might be fun, then put it down for good after a few arm strikes that says, "shooting a bow might not be so fun after all... But, in an effort to keep price down that may have been the one thing that pushed it over their cost threshold.

@katsoupe6225 9 ай бұрын

Hey is the sanlida Noble FF compatible?

@NUSensei 9 ай бұрын

Yes. I believe the string it comes with is FF.

@fahlvfaust677 7 ай бұрын

@@NUSenseiSanlida archery (jandao/noble models) TD recurve limbs. They have wood overlays from the lower tip to the end tip. I'm not sure if wooden overlays are strong enough to handle low-stretch fastflight strings. Some reviews said those limbs were FF-compatible.