DONE The Cummins Is In! // Project F350 Super Ute

[@baracudabill6076]

Snails are a part of the mollusc family and therefore do not fart. However, if you step on one fast and firmly enough, it can sound like an underdeveloped airbiscuit... the more you know.

[@wayne9518]

But fish can fart, as they go deeper the pressure can cause gaseous emissions.

[@KCadbyRacing]

You've got that backwards@@wayne9518 ,farts expand with decreasing depth/pressure 🐡💨🐡💨

[@aluminumfalcon552]

@@wayne9518Fish belch too.

[@jimurrata6785]

Technically correct, the best _kind of_ correct! 😉

[@fuffoon]

My bird farts. My pug farts nuclearly.

[@vitovenditti4500]

Always amazed by your knowledge, your life story, your ambition, and your abilities. All respect. Major props to you.❤😊

[@wartsworkshop1900]

Grandma's Ranger, sister's Xterra, Charlie's Super Duty, and the engine from Dad's Tundra. I'm pretty sure Sarah's love language is "fixing old trucks."

[@yagiotoko2110]

I'd forgotten about that Nissan! I wonder how that Xterra is doing these days?

[@larspulena]

That is a lovely compliment.

[@Fransitch]

Quick tip. All sand blasters are the same. Expensive or cheap. It’s all the same concept. If it keeps clogging, plug the business end of the nozzle with your hand firmly before you hit the pedal. It’ll blowback the stuck pieces and unclog it. You’ll need to keep doing it over and over. It also gets harder as more paint chips mix in with the sand/blasting material. Hope this helps

[@kingmanstudent]

That has to be the nicest work truck I’ve seen that isn’t brand new.

[@LesterSuggs]

There is *NO LIMIT* to what Sarah can do!

[@timonsolus]

But there is a limit to what a snail can do. A snail cannot fart. Unlike Sarah, who can.

[@davepelfrey3958]

​@@timonsolus, oooook then. 🤔🤔🤔

[@wayne9518]

Can’t lick her elbow Everything else, check!

[@christinewhybrow8813]

Just want to say how great it is to see a fellow girl on this platform. not afraid to demonstrate her brains & subject knowledge. Also, I LOVE Japanese cars, my first car was a Celica that needed a LOT of work, and I've STILL got that car. Keep up the great work, I'm now a watcher of all things Sarah!!

[@keithbarry886]

I’ve been a heavy duty mechanic and certified Cummins engine builder for 15 years. The part below the valve cover is the rocker box cover . Such a fun engine to build or inframe as they are so stupid simple. Looks great!

[@SarahnTuned]

Rocker Box Cover 🫡 copy that

[@PiDsPagePrototypes]

​@@SarahnTunedSpeaking of the parts on this engine, you've seen all the comments about the potential of the factory inlet heater to drop a bolt in to the engine? Banks Power have a fix for that, maybe they'd sponser a "How to install it at home" video from you. :)

[@jspaulding4106]

Rocker box cover? I hardly know 'er.

[@PiDsPagePrototypes]

@@jspaulding4106 ba dum, Tish!!

[@abc-ed1nr]

I’ve never rebuilt any motor, but it’s impossible to find a shop to do it for you

[@Primus54]

Wow… that was a shit-ton of work accomplished. I actually really like these videos that bounce around to different tasks. Thank you as always, Sarah. 👍👍👍

[@MyWillypilly]

Just like real work. You bounce around to what you have time for, or what is timely , while you wait..

[@rpeterson223]

Sarah, we love it when you bounce around 😮

[@MyWillypilly]

@@rpeterson223 I second that..

[@manifestSD]

Objects definitely have souls, which is why I love this channel -- we get to see their personalities. Dos! The MR2 playlist is an amazing experience.

[@PiDsPagePrototypes]

There's a definition, from the homeland of Mr Dos,. "Tsukumogami " are the spirits of the "Yōkai", being the well loved and hard working tools and day to day utilitarian objects.

[@richardbates2367]

I also understand that, the 79 Chevy k20 Scottsdale Long bed farm truck was a fertilizer sprayer truck for a fairly decent size farm so it had 119 on the rear but and a cb base station antenna whip screwed to the inner top lip of the Dr side front fender and the Motorola base station radio in the truck and it all was left with the truck i didn't remove it

[@jimurrata6785]

This girl gets more accomplished in a week than i can acomplish in a month!

[@RFXLR]

Hello Sarah. I'm watching videos on the internet!

[@cpbremote]

Are they videos on the internet about cars?

[@RFXLR]

@@cpbremote I believe they are!!

[@4ahr]

What is internet 🧌🧞‍♀

[@jerrycapizzi2081]

Led Zep T-shirt for the win

[@TarmenAmzarian]

Sarah, as someone who watches every one of your videos, I cannot understate the importance of this: Do not overwork yourself! We will wait for your content, don't worry!

[@87Supra4runner]

Sarah, as much as i love seeing your next video i can tell you are burning yourself out and the candle at both ends. Take a couple weeks off for yourself, we will all be here waiting for you to come back. Much love ❤

[@gewglesux]

what year is your 4 runner?

[@SarahnTuned]

My candle is a crusty burnt wick stuck to the bottom of an empty glass jar at this point.

[@stevemawer848]

@@SarahnTuned So long as your empty glass jar isn't half empty! 🙂

[@SinVacas-ch5fv]

I like that Charlie is still around.

[@cheapcodemonkey]

I’ve been wondering about how his back is doing. I love the effort going into a truck for him.

[@SarahnTuned]

It's better'ish now that he has an office job, but still has degenerative arthritis of the spine.

[@cheapcodemonkey]

@@SarahnTuned thank you for taking the time to explain. Wish him the best! Love your channel and the unfiltered jokes as much as the deep dives whether in or out of your comfort zone.

[@GroundedFlyboy737]

@@SarahnTuned Not blowing smoke up your butt, but I think Charlie might be as smart as you. Great team!

[@ronayotte3571]

Well done, Sarah. It was nice seeing Charlie again.

[@SHEARMANDESIGN]

Engine crane! Before tearing it apart, pump the jib all the way up in the air, and then keep going for 5-10 seconds more. Should stop it going down by itself 🙂 Usually some air gets in where it shouldn't after the cylinder has been horizontal for transport etc 🙂

[@Vtarngpb]

Ferda! 😅

[@LAP1050]

Another meticulously wrenched and assembled project leaves the, world renowned, “Sarah -n- Tuned” shop. Glad Charlie came by to help… Although, you could have done it yourself, we know that for sure.👍 🇺🇸

[@Dusty0116]

Sarah, the F350 looks absolutely amazing! The cab looks factory new! Glad you had help getting the engine and cab on the frame! Every video you do Sarah, is a Journey into the Very Interesting Zone! I look forward to every one! Thank you!! 👍🏻👍🏻

[@Skaramine]

"Inanimate objects have souls. " I'm not the only one. Fantastic job rebuilding.this beast. Go Mr. 350!

[@TheDrivewayEngineer]

The swap kit is from Diesel Conversion Specialists, they do a great job.

[@BFT88]

The innuendos that you don’t take advantage of….we hear you Sarah; and it is hilarious hahahahahaha 😂.

[@e-handle9634]

Just like Ragu.. It's in Dehr ! (olden timey reference 🤤) Charlesleigh gohn be Sportin'❗🕺❤️‍🔥

[@jefferywdonald]

A tip for the sand / wet blast cabinet. Hook the air supply hose directly to the back of the gun. Made a huge difference with my cabinet. I use the Skat Blast brand handle/nozzle with the air hose hooked directly into the back of the gun with one of those inline water filters that are see through. Made a night and day difference.

[@nitemareglitch]

You are my favorite resto/build youtuber.

[@Pearmain2009]

The truck looks like new. The project definitely has evolved and is another high quality and standard project that we are so used to seeing from you Sarah. You should be so proud of yourself.

[@timothyearp631]

The N14 Cummins that was in Semi trucks had the valve covers painted red. Probably the best engine Cummins ever made, I have driven enough of them.

[@gregorypizzini]

To Be Fair……. I'm binging Letterkenny also. And the wire brush works.

[@jerrynickell3613]

I believe that you are the hardest-working person on KZbin. Just saying.... Amazing work, as always!

[@SeanLynchXY]

Thank you, that was fun. :)

[@mii747]

As an Aussie who has owned a tray Ute in the past, I appreciate what you are trying to achieve. They’re very versatile vehicles.

[@bsmirnov]

The truck looks absolutely brutal in this colour, with new front grill, and those chunky wheels, even without the front bumper. 👍 Also it was easy to spot the Alice in Chains reference, cause I actually sung along with their Man in the Box video after breakfast this morning. 🤘

[@RazzleDazzle-g5s]

Ok, I remember us driving your manual transmission Cummins around Santa Cruz city. I don't have to drive around anymore😎 thanks for the cool memories.

[@lordraiden5398]

Sarah, get your rest. We will be here.

[@mikemccabe7124]

should buy Stinger's roadkill speed rings baffle kit for the speakers they designed to be trimmed to fit ur vehicle inside door & outside door between door metal & door panel

[@dcxplant]

Really fun to see you two work together. What a great project!

[@marcusott2973]

Much awaited, much appreciated. I look forward to excellent work as always from you.

[@markphilpot8734]

When you have a Charlie around it doesn’t hurt. You drive yourself like cattle Sarah. I know what is. It’s called a work ethic. I get it. Please don’t neglect yourself. You deserve to be healthy. Only you can decide. I support your decisions. I remember the garage days. No one can accuse you of slacking. We care, your viewers. Press on Sarah!

[@jjohnston1788]

Thanks for your hard work!!

[@kengoodey]

A Sarah vid dropping just before my bedtime (in the UK) is a great way to end the week!

[@mostcom]

Wow I want to count the scene changes (no, no I don't). The editing nightmare that it must have been. It turned out perfect. Thanks Sarah, you are greatly appreciated. A min-series episode. I would be happy to stop by and produce Sarah-n-tuned product labels for all the bottles, cans and unsponsored equipment seen in your videos. So funny. And something coming on the MRtoo soon. 7:30 music and impact synchro, chefs kiss.

[@TyphoonJetPilotMeteb]

🔴🔴🔴🔴 When I see Sarah and Charlie together I immediately remember Frank and Karen from the Punisher movie ...

[@bryannobu]

Those speaker baffles, we usually cut them in half or just use the top 1/3 of it just to keep water from getting on the top of the speaker. Also, the speaker sounds way better using the door as an enclosure as opposed to sealing that speaker in the foam baffle fully intact.

[@bbqcrew1]

Thanks

[@larulrich7417]

Former Ford parts manager and tech here. I could be wrong, but I believe the cabs for the ford pickups were the same from 2000 until the late 2010s I believe. Started my automotive career at the scrap yard and we would sell cabs all the time cause the interchange is huge on them. Thats why the front clip swaps are so common and easy on the fords, they would update front ends and interiors, move to new drivetrains and updated part designs but the cabs would be the same. So if youre having issues with the weather stripping or anything else you may be able to find one from a newer model single cab.

[@BrianPetersen-l2w]

I always enjoy your video's, it's easy to see why everyone falls in love with you... you're smart, quirky, beautiful and fun loving.

[@REB63]

Your attention to detail is 2nd to none Sarah!

[@Elemino]

6:40 those foam baffles you discarded make speakers sound FAR better than they do without them. I’ve used them on every system install I’ve done since 2001. Worth every cent if you can get them to work.

[@larrydavidson3402]

The F350 just keeps looking better and better.

[@DavidGarcia-lf7bd]

Thanks!

[@petermoller8337]

“To be fair”😊 You are the best restorer on KZbin 😊🇦🇺👍

[@TheTransmaniaconMC]

Letterkenny reference? ;) Yeppers!

[@codyknutson4665]

​@@TheTransmaniaconMCpitter patter

[@gazzad3615]

@VixenSurfaceTreatments Come on guys, you need to help Sarah out with her vapour blasting issues. I think Sarah's levels of OCD trumps Sreten's over at M539 resto, would be awesome to see her use it.

[@SarahnTuned]

I’ve tried getting sponsors, no one was interested in working with me.

[@gazzad3615]

@@SarahnTuned well if I ever win the lotto over here in the UK, I'll be buying and sending you a vapour blasting cabinet! I could imagine you'd be blasting anything and everything you can remove from a vehicle! Much love!

[@joewebb1663]

When using aircraft paint removal cover it with plastic for a few minutes it helps seal in the smell and help the chemicals eat in to the paint better.

[@iainf6]

So much work going on in the tiny shop, hope that your plans for the future come to fruition. This truck is looking fire, 🔥🔥🔥excellent build Sarah 👏🏻👏🏻👏🏻👏🏻👏🏻

[@m1c4a3l0r8n6e]

I've played your 1991 MR2 play list. Its great. I've shared it at the hardware store where I work. Its popular. Thanks!

[@e-handle9634]

Mmm just noticed: Whoo Hoo❗622.. k that is 🤗

[@stevenfarrall3942]

Good evening from the UK.

[@gewglesux]

and to you sir.

[@marioortega7218]

That molded foam enclosure you tossed actually served two purposes; one, weather proofing so moisture doesn't effect the transducer, preventing oxidation and shorting out. And, two, for sound purposes. A speaker on its own sounds like thin nothingness, that is why they are mounted in enclosures. It's where the tone comes from... js. I do enjoy your content.

[@GroundedFlyboy737]

Wouldn't the inside cavity of the door itself act as a sound enclosure? Asking for a friend.

[@KateOrKatieOrKatherine]

Hahaha!! "Being a particular individual" is a classic quote! Fun fact, a friend of mine's online handle is Beef Supreme!

[@paulhoskins7852]

This, the Celica, and your grandma's Ranger are my favorites! Awesome job! If only I could bring my Ranger to you...

[@terencehawkes3933]

Sara, don't overdo it. You are keeping quite a work schedule. Take. some time to rest up.

[@DADDYO3]

Your right Sarah. They do have souls.

[@allenlawler225]

Thanks again for the copious amount of work you do. Love all of your projects.

[@stanelder9995]

Throw some adhesive sound deadening panels inside those doors while you have easy access! Will improve the sound of the speakers too!

[@doctor2bob]

Another fun snail fact. A local school had a call out for people to catch and supply live snails for a fundraiser. In two nights I found 458 snails in my garden...

[@jhonathanknox632]

I'm a little jealous of the MR2... Buddy of mine in college had one and that was the single most terrifying car I've ever drove. Gonna own one some day

[@Exellerix]

Sarah! You should use butyl sound deadening in door panels when installing speakers, it will significantly cut back on vibration from the flat door panel, and can often times also quiet road noise following the same principle! This shit works a lot better than most of the deadening pads and moldings that are pre-installed on most cars. Some people also use these butyl deadening pads in replacement of a traditional vapor barrier as well, since it's sealed the exact same. Look into dynamat, or kilmat, or some equivalent company. Lots of car audio enthusiasts use this stuff for isolated sound systems, especially competition systems.

[@DiscGolfRoof]

Should get Cummins badges to put where the power stroke ones go

[@kronos6948]

I'm thinking that those foam inserts for the speakers are possibly because those particular speakers may need to be in a sealed enclosure. This helps with frequency response and also helps to keep the stuff inside the door from vibrating at certain frequencies.

[@mikelo303]

So basically ditching those foam inserts for speakers turned your doors into huge speakers, and now you will hear all the back of the doors with your music, which basically will sound like a bathroom. Always use speaker inserts/dampening behind speakers. Always. It's a part of the speaker.

[@worseorbetter]

Some things work, others not so much. That Aircraft paint remover is one such example. If you get the California formula you brush it on, wait for it to do absolutely nothing,. Then scrape it off.

[@djfreshkig8361]

I was ho-hum at first, but now I think that truck looks SWEET. That color is noyce. Can't wait to see finished result.

[@billschlafer]

Best part of my Sundays!

[@Mister006]

I didn't know that was your UR Quattro in Electrikhana! Nice!

[@richardtovar127]

Great to see Charlie again, I get us to all your friends that work with you.

[@buckroger5850]

I've got a zf6 in my 1994 Dodge cummins. 👍

[@TeslaTales59]

SnT, this is a really well done project. Detailed and will be great when it's complete.

[@kevinschoeppler4115]

We want more truck rebuild updates on this one? 🎉 🎉. Please give us a follow video on the completed project. 🎉🎉. This was a cool series for vintage truck builders. ThankYou!!

[@deliawolfe]

Jumping back and forth between the heavy-lifting of mechanical work and the more esthetic emblems and door seals is the kind of approach I take on my projects to break the monotony of grinding out the kind of lifting/pushing/straining necessary to force all those the big pieces together. And based on my experience, everyone needs a "Charlie" to provide help when deemed necessary. Brava!

[@kurtzxcvb3481]

If you cover the paint stripper with plastic it makes it perform better and strep the paint faster just an FYI for future thought it might help you out

[@howardjacobs1325]

You did a great ford Cummins swap Sarah just like a new ford but built better love your videos 😊

[@PrestonsGarage]

Since the power stroke badges were mentioned, you should put some Cummins badges near the head lights where the Triton V8/V10 badges would be on other trucks. Mainly suggesting this as i think it would be a subtle complement to the look of the truck.

[@defendermender4959]

Hey I’ve found ditching the el cheapo nozzles that are as soft as cats vomit and getting a carbide type one, that won’t wear out so quickly helps a lot with consistency. Sizing the orifice in it to suit the compressor, will help a lot too 😊

[@gregsheppard1457]

A Giulia to road test! You floated the notion a while back and someone heard you. Looking forward to that one. Keep up all your amazing work.

[@beardednategaming7188]

I have to say, I don't get time to watch all your videos but I am enjoying these superduty videos, I wish these were available in Australia cheap.

[@ChrisLocke1969]

I probably would've used something other than that fedora... pretty sure its purpose is not only dampening, but moisture protection. Maybe at least silicone-seal the connections and bare exposed electrical parts.

[@lewispaine4589]

I miss that little MR2, what a neat little car, probably my favourite of all your projects.

[@germantorres5652]

Hats off to whoever chose the soundtrack for the episode. Very Mexican regional vibes

[@SarahnTuned]

These videos are produced 100% by myself 🫡

[@Cokecan55d]

Awesome videos of this “Super Uty” rebuild. I learned a lot just from watching the videos, and I really appreciate the time and effort you always put into the editing and development process. Your humor makes just about every difficult job a little more bearable. Awesome work!!

[@bryannobu]

Yes. Keep thee 330 #'s ❤️ it!

[@powool]

The bead blasting box is fine. If you’re having trouble with results, fix the nozzle and siphon first. Having extensively done both paint stripper and bead blasting as a hobbyist, I would avoid the methylene chloride paint stripper at all costs. It is awful stuff.

[@tumakbaluk]

😄 Letterkenny reference, Mr. Dos, and a car review on the way! YAY! 🧡

[@Lo_natilo_massages]

Hello from France 🇫🇷. Bravo, bravo and bravo again. ❤

[@rudolphlouw2719]

Loving the Giulia in the background there - time to make it a permanent addition Sarah :)

[@TheMichaeljmanzelda]

According to ChatGPT, Yes, snails do release gas as part of their digestive process, which can be considered a form of farting. However, it's not as noticeable or frequent as in some other animals.

[@Johnny_Kanuk]

Charlie is going to have one badass truck when it's all done. I kinda like the headlights now that you can see the front-end altogether.

[@bigedsbeachsidegarage3968]

When Ford used the Cummins engines in there medium duty trucks and busses the engines were Gray.

[@southcoastbiker3822]

You don’t need to work that hard. The caravan starts for the dawn of nothing. It’s all gonna be ok x