Satisfying FDM support removal!

Model: 12-hole playable Ocarina
Link: www.printables...
Printer: Ender 3 V3 KE.
Amazon Link: amzn.to/3wZ3ts6
Filament: R3D Gray PLA.
Amazon Link: amzn.to/4aJIQy5
Slicer: Orca Slicer.
Link: github.com/Sof...
Layer Height: 0.02mm.
Support Z Distance value: 0.02mm.
As an Amazon Associate I from qualifying purchases.

[@zrex66]

ughhh so satisfying. did you tweak the settings to a different particular distance for support to body?

[@SlicePrintRoleplay]

Yep, for the model printed in this video I used a Support Z Gap of 0.2mm for both top and bottom. I believe the stock value was 0.15mm. My basic rule with your support Z distance settings is to start with the 1X your layer height. Then try 2X. Some slicers (like Cura) will actually force you to use a multiple of the layer height. So if your layer height is 0.12 and you have a support z distance gap of 0.2, Cura will round that up to 0.24.

[@johnmay998]

@@SlicePrintRoleplay just pure beauty earned my follow in a second

[@SlicePrintRoleplay]

@@johnmay998 much appreciated. 💚

[@primus1873]

Wow

[@Tennesseeroadster222]

What slicer was used I'm still new with my ke that some prints supports were let's say melted in

[@mrhehheh3552]

Колдунство

[@juniorhernandez7693]

Can you please drop the settings for that support 🙏

[@SlicePrintRoleplay]

They are mostly stock for the Orca Slicer Ender 3 V3 KE profile. However, the default Support Z Distance value wasn't 0.2mm which is what I used and gave me this result.

[@Saveddrip]

@@SlicePrintRoleplay if only reality was so simple. you didnt get this from changing one setting .2mm

[@SlicePrintRoleplay]

@@Saveddrip you caught me. Filament companies secretly pay me to put out misleading videos. Then people waste filament trying to recreate my results and therfore purchase more filament...

[@davidharris3880]

@@SlicePrintRoleplay 🤑

[@Whitaker2472]

Where did you get the Zelda flute file from

[@SlicePrintRoleplay]

Thank you for letting me know that I didn't post a link to the model. I can't believe I did that. 🤦‍♂️ I put a link to it in the description, but I'll put it here as well. www.printables.com/model/65399-12-hole-playable-ocarina

[@1TW1-m5i]

Sorcery

[@SlicePrintRoleplay]

Technically it's blood magic but yeah basically. 😜

[@handznet]

No we cant see they are attached- you sliding the model while pressing it against the supports. Seems like supports are already disconnected

[@SlicePrintRoleplay]

I can't tell if you're serious or not. 😅