Mass Dumbbells Production Process! Amazing Dumbbell Factory !

Rare and high quality dumbbell production factory, large scale dumbbell making.
Enterprises in Video
⚛︎ www.wavar.com
⚛︎ WhatsApp: [phone]
⚛︎ Email: [e-mail]
⚛︎ Inquiries: [e-mail]
⚛︎ Copyright ⓒ 2024. #Satisfying Tech
__________________________________________
• 中国授权二创加微信（备注二创授权）：Stevenswans
#Dumbbell#Dumbbell process#Fitness Equipment #

[@TheCuriousOrbs]

The guys in that factory are getting a more consistent workout than anyone who will ever buy them.

[@Turco949]

If all the workers looked like the way Ah-nuld looked in the 70s, this video would go viral faster than you could type LOL!

[@NatthapolVanasrivilai]

They guy doing the friction weld has to lift all those drumbells everyday

[@Omsip123]

I hope he is switching arms 😅

[@gyorgygajdos1657]

Lateral raises + bent over rows. Best proof that low weights don't do jacksh*t no matter the volume

[@anxiousdog]

That’s child’s play compared to the final prep guy packing them in boxes of 50kg.

[@tbrizius]

@@anxiousdog

[@grant4458]

Dude getting his pump on

[@nguyenson7073]

Work is gym, gym is work

[@djbillye4943]

lol

[@tononoinks5231]

You go jim? I make jim.

[@TuttleScott]

a surprising amount of work goes into something that looks so simple

[@owievisie]

I am suprised there is so much manual labor involved

[@FireGodSpeed]

@@owievisie you could automate the chamfer on that puck with a robot arm. You could make those handles on a CNC lathe with a bar feeder. You could automate the friction welding with a robot arm.. And the worst part of this video, the mould they use.. my god a injection mold with 0 injectors and worn too? i mean bruh.. (its worn given the flashing aka the excess material on the side of the weights). A vertical injection mold machine with injectors and a robot arm could automate this and if the mould is done right it should also have basically no flashing so you don't have to clean them after. So the only real thing that still has to be done manually is material stocking. So technically speaking almost everything could be automated but given the fact that they are probably cheaper than any robot would cost.. it is what it is.

[@jsnyara]

They are all MUCH stronger than they look.

[@jcb805]

🎉😂

[@chadbrowski2508]

Ask some poor lads toe 😅

[@agrushnev]

Probably as strong as Anatoly )

[@behnamshamsi-sh6lh]

From this time on , I respect each pair of dumbells , I never fall them down

[@Nebulaoblivion]

you were only costing yourself gains by dropping them before lol.

[@jeremiahstromberg8940]

@@Nebulaoblivion let me guess. youre under 180lbs

[@hasanrudd9823]

I never thought so much of this process was done by hand.

[@TTGTanner]

Its bc they don’t have a dumbell making machine

[@christheone248]

I always wondered where you would use friction welding, now I see the use of it! I would love to get my hands on a full set of these dumbbells!

[@stuffbenlikes]

Those guys gotta have some good grip strength doing that all day.

[@Soulessdeeds]

@4:59 that man's arm lol. Literally paid to pump iron.

[@antongyrt4814]

Перед упаковкой он должен каждую гантелю испытать, минимум 10 подъемов по три подхода. 😂

[@BODHISATTVA108]

это сделают грузчики, кладовщики, продавцы-консультанты, кассиры, халявщики-покупатели...

[@ВиталийСушко-з7р]

А мне , зделате гантели пожалуста на 13,5 кг

[@ToskaForsite]

- Я делаю 4 подхода по 10 повторений. - А я с восьми утра до восьми вечера.

[@ToskaForsite]

- Я делаю 4 подхода по 10 повторений. - А я с восьми утра до восьми вечера.

[@Dug6666666]

I own dumbbells like these. I always assumed the ends where some sort of hex shape casting with a thin rubber coating. Interesting.

[@reditoao]

Yeah, and it makes so much more sense when you think about it. From a manufacturer's standpoint, it's both cheaper and easier to have circular billets for each end of the dumbbell then cast a hexagonal rubber coating on top of it.

[@antonmaxx]

Chinese are so hard-working but they never get enough credit.

[@batkata001]

Now this is a product with true lifetime warranty!

[@ChilenoHk]

No one goes to a fight or try to rob something from a Wavar employee, that's the rule in town 🤣

[@CL-yp1bs]

Ahahahaha! LOL for real

[@airgunningyup]

love the locking fixture for the dumbell handle,, the lady with the scalpel is a master

[@far_outlook]

04:06 I have never heard of this friction welding method, but I think this welding method makes joints that are not as strong as electric welding, just aesthetically pleasing, can anyone explain this method to me?

[@drogs2009]

Этот метод надëжнее чем электросварка и многократно дешевле. Принцип такой же как и в электросварка, то есть идëт перемешивание металла.

[@mryilmazemre]

When you weld with any other method you would be welding the points you can touch, which is basically perimeter of handle. With friction welding you are getting all the surface of the handle to weld to the weight. This way it is stronger than other methods. Geometry is the limiting factor here

[@far_outlook]

@@drogs2009 What are its disadvantages?

[@far_outlook]

@@mryilmazemre Is this method as durable as electric welding?

[@Pixel_FX]

@@far_outlook way stronger tahn electric welding. pretty much entire surface gets melted and welded. when u do electric welding only the outer edges weld, even with tapered you still wont have same amount of welded area as friction welding.

[@user-nh8ft2md1u]

Прикольно и любопытно было увидеть такое производство! 40 лет тренируюсь с железом, но такое вижу впервые.

[@jacky4640]

Working here is like getting a free workout every day.

[@SalehShah-m6s]

So beautiful.

[@user-rz6pm4ml7h]

Гантели гексагональные не знал что внутри круглые, весят ровно как на них написано , но первое время воняют. Лучше покупать заранее😊

[@c1q3]

I bet those workers don't go to GYM after work.

[@thecommonsenseconservative5576]

Grammar....learn it

[@Pootie_Tan]

What is gremmer, babe? 💋

[@c1q3]

@@Pootie_TanI am trying hard bro :)

[@Pootie_Tan]

@@c1q3 lol pika pika pikachu

[@davidkymdell452]

You should try being a removalist....

[@frfrpr]

I've spent a lot of time and effort with dumbells. Now I know how they are made. Thanks for the video

[@ActMedInfo]

На заводе можно нехило подкачаться))

[@quangsumi]

I cried, it's so beautiful 🥹

[@PedroVargas-k6b]

It's like going to the gym and getting paid 😅

[@emillyyelen5169]

yeah its called manual labor...

[@PedroVargas-k6b]

@@emillyyelen5169 you're so smart 🤓👍

[@Abhi-hq5xw]

​@@PedroVargas-k6b you got schoooled mofo😂😂😂😂😂😂

[@Kaiser_257]

I don't go to the gym, I make the gym

[@Asthmos]

i got some 30lbs from Wal Mart today! cool to see how they were made. my 20lbs looks like they were poured from iron in the 1970's

[@Druze_Tito]

ok now, tell us the price per kg so the local sellers don't rip us off.

[@SweBeach2023]

Buying steel bars are - give or take - around 1$/kg depending on quality. So a 50 kg dumbell can be 50-80 dollar in material alone.

[@TonatiuhSt]

Я бы предпочёл цельную конструкцию. ... Даже если эта сварка надежна...

[@sassoarancione]

0:23 Halloween theme ahh music 💀

[@TheeAthis]

A shallow counterbore would have been a really nice feature for the handle/weight friction weld relationship.

[@robynsonhv6544]

wow, gracias por el video estuvo genial....

[@rusrus4485]

Сильный коллектив💪

[@parktronik7120]

Скорей жилистый и выносливый. Смену гантели тягать.

[@MikefromRussia]

Интересно, осуществляется ли контроль веса? Хотя бы выборочно из каждой партии.

[@iRReligious]

Very nice production line! Good job! 😌👍

[@rcortez5979]

idk why im drooling from seeing these dumbbells, i wanna buy one so bad LuL

[@joelreis5366]

Great video, but i really wanted to see how you make the knurling effect on the grips. Still it was great to watch.

[@eiweipumpe9933]

Where is the LiveLeak logo?

[@jimbo7484]

Abs for days at that factory for sure! Good video.I learned something today,thanks.

[@kog3707]

知ってたけど、ゴム付けた状態での最終計量はしてないんですね・・・

[@Timothy271279]

32kg dumbell shoot that would be hard work

[@костикмостик-д8т]

Еще одна конторка со старым оборудованием и горой рабочей силы

[@ДмитрийС-х7б]

Интересно, сколько будет стоить с фрезеровкой и пайкой. Если они не разборный, не проще отливать в форму чугун?

[@metallfantasy2250]

Так дешевле.

[@denden5395]

@@ДмитрийС-х7б надо делать литевые формы, надо плавить чугун - это все затраты электроэнергии и денег. А тут просто болванку взяли, распилили, сняли фаску и приварили. Производство одной гантели занимает минут 10. А литьем - пока остынет, пока что. Причем болванка наверняка самая дешевая и податливая для фрезеровки. или вообще брак, с неправильным качественным составом. А может вообще это старое производство, ан котором токарные станки , вышедшие из строя (из-за неточности и т.п.) стали использовать для производства гантелей.

[@I_Capone]

@@ДмитрийС-х7б Не проще, но и намного дороже. Нужен литейный цех с целой ротой рабочих различный специальностей, нужен материал, большое количество энергии, наверно ещё роту формовщиков из Индии надо будет пригнать) Металургия любит большие объёмы, чем меньше, тем сложнее, при чём кратно. А даже если всё получится с литейным производством, то все заготовки надо будет всё равно рубить, токарить, шлифовать. Т.е. проделывать тот же самый цикл, что и на видео. Поэтому купить готовые стальные круги и просто отрезать лишнее, намного дешевле и эффективнее.

[@ta4ikomaz]

@@ДмитрийС-х7б Тут и так уже всё упрощено и оптимизировано ради минимальной себестоимости. Разве что держатель на сварочном можно было поворотным сделать, но тогда рукоять может не успевать остыть.

[@stryperlose2960]

덤벨제조공장까지 유튜브카테고리에 뜨는걸보니 나도 이제 헬창반열에 들어가는구나...

[@diegovalencia3991]

Ese tipo de soldadura, será confiable,para el esfuerzo diario en un gym

[@dark_horror]

Не думал, что проф. гантели изготавливают на таких старых мини-заводиках...

[@Andrey222ful]

А зачем большой и высокотехнологический завод для производства такого простого продукта? Это тебе же не микроэлектроника. Ты наверное поражаешься цены из-за брэнда который продает его. Так больше половину прибыли получает брэнд практически ничего не делая, а не завод производитель.

[@vovasanko7597]

Вернись в реальный мир) Рекламная и маркетинговая шелуха про "инновации" и "высокотехнологичные производства" - это для Инстаграма и блондинок. 90% производств оснащены по принципу "дешево и сердито". Да и остальные 10% красиво выглядят лишь в рекламных роликах - когда в кадре лишь рабочие модельной внешности и все вокруг сияет чистотой и нет ни пыли, ни дыма. Исключение - заводы микроэлектроники, но их в мире - сотые доли процента.

[@abhimonnubiswas2334]

some people doing hardwork to feed their stomach and some people doing hard work to show their appetite

[@Trinidad_iz_Tobago]

Каждый китайский ребёнок с утра обязан сделать зарядку для телефона и гантели для зарядки!🤓

[@delboyoelmundo4718]

Are the workers Ripped ?

[@bishopoftroy]

I thought they were mixing protein powder with that rubber in the heat press. It shoud`ve been imPRESSive.

[@BB1951]

You would think these guys would have massive arms lifting these weights all day.

[@skotwilt]

kinda neat how they weld the bells on.. im guessin thats "friction welding"? lol

[@cambrowndrums]

Yes it is

[@matthewmiller2219]

Not sure why the knurling process wasn't shown. It's impressive to see

[@torquebiker9959]

nice quality, well made 👏👏👏

[@InfoRanker]

The guy at the end lifting the 50kg box with no problem.

[@BoomixDe]

Lifting weights 40hours per week

[@rikkimikki889]

Это видео доставило мне удовольствие

[@Klyuch_Na_13]

На фабрике,все качаются.😊

[@MrCarnivoure]

All these guys need to do is lift one of each dumbell once every day and they have consistent workout and their muscles will blow up ! I remember i was brick layer helper and was throwing away old parts of old chimney and each time i lifted piece of rubble i done one bicep curl

[@fernandoaraujo8792]

Vídeo maravilhoso, agora sei o esforço para produção dos halteres

[@danijel124]

Even the used dumbbells are expensive af... And you have to get lucky to even find the right weights loolz...

[@pravjkumar]

Wow... They are the strongest people... Daily lifting dumbbells n number of times ... I would like to order a pair of 5 kgs...

[@TheEnglish1988]

What do you do for a living? I lift weights.

[@lannnan]

4:17 Damn, that forearm

[@kellymoses8566]

I want to see how they do the VERY heavy dumbbells.

[@sirmontag]

Right? I can curl a 50 lb. dumbbell for 4 or 5 reps and that's it. I can't even begin to imagine lifting 50 lb. dumbbells hundreds of times a day.

[@This-Iz-Patrick]

Every dude in this factory has jacked forearms

[@Opilkin-f4b]

Респект китайцам!

[@gohkairen2980]

we hit the gym, they are THE GYM

[@ThanhNguyen-tl6ve]

Packaging is the heaviest work in there, other guys lift one dumbbell each time but the packer lifts two dumbbells in the end

[@Terry11111]

I thought all the people working there would be ripped

[@BurninVinyl]

Thank you for sharing this video. Just one advise: If you only use different rubber instead of the one you get from petrol like from rubber tree, these dumbbells will basically last forever and you would have no competition for the quality.

[@hgk2268]

Work Is Workout And Workout Is Work

[@Mark.in.taiwan]

I'm also CNC machine operator technician

[@BallerinaNatasha]

спасибо!

[@tomaszstepien628]

Bez sensu angażować taką dokładną obróbkę do hantli

[@chadbrowski2508]

We go Jim, WE GO JIM!

[@alejandro182220]

a pretty healthy job

[@maxdishaw]

They must get so jacked working here

[@260bossute]

Nice product... Used them many times.

[@gordibito]

Awesome!

[@milootje007]

Straight to the USA 😆🤣

[@SaysSim0n]

that poor forklift

[@jakubr3831]

10:09 Gym Etiquette: Re-Racking Your Weights

[@NickMasseyRideon]

wow, never heard of friction welding, makes sense though

[@TheeGrandmaster]

4:17 look how swole this guys forearm is holy shit

[@leecm]

Rise of the Velcro randomly making an appearance.

[@quadmasta]

The forearms on these dues are huge

[@richguy32]

I kind of wanted to see the knurling be made...but i guess we'll just ignore that

[@briantse2265]

I did all the knurling. I do it by hand with a chisel and scraper

[@davidfafford1388]

You would think they would all be shredded.

[@gonza1109gz]

Bien vídeo, no pensé que se fabricarán así.

[@badery2]

My back hurts after watching this.

[@vasek__spb3361]

Там наверное сильные люди работают

[@Arjay.M88]

"What do you do for work?" "I lift weights all day..."

[@user-bm2oe8xd6u]

I have to say very impressed with the final product hope people can learn something about manufacturing and why things cost money

[@emila6]

If you’ve noticed, they have big arms!

[@jarrodfrankum]

Captions on 5:36 - Adding rubber flavorings.... Never knew you were supposed to eat the dumbbells.

[@The99e]

Идут ли эти работяги после работы в качалку?

[@Tshipa]

I'm getting a pump just looking at all that iron

[@ultrariz3000]

Imagine if he curled every one he lifted