Saturn 1.9 SOHC TB head gaskit replacement procedure work coments.
Пікірлер: 19
@rjjames450110 ай бұрын
Just picked one of these up with a bad head gasket, thanks for posting a good video on it! 02 sl1 140k miles coolant in oil, no start. Felpro kit was on sale and $69 shipped to my. With head bolts.
@coupelikeacaravan2 жыл бұрын
Great tips, I know, I took the alternator off and I regretted it instantly
@jessicaripley56543 жыл бұрын
Dude looks just like mine and RAN PERFECT! Fuck every one who talks shit..the problem is/was YES they burnt oil and no one checks there oil and every one knows what happens when run low/out of oil..if you check your oil and keep her fed I know people with well of 800k on engine still going strong
@TechKnowCSS3 жыл бұрын
The main reason I put new pistons rings and rod bearings in it is there is a small flaw with the factory pistons that force them to burn oil, there is no drain holes in the oil ring grove and that causes them to burn the oil, so for $99 on ebay i got the upgraded pistons with the holes in them with rings, there is a easy way to drill the holes yourself but WTF they are already out so why not put new ones in. and rod bearings were only $20 and they were fine but again they were out already so why not put new ones in.
@Cokie9074 ай бұрын
Yes, I just recently did the piston soak procedure on my SL2 which has 266,000 on it. Let it soak for a few days and my consumption went from 350 mi/qt to about 750 miles/qt. I would love to take my motor apart and replace them pistons or drill in the drain-back holes.
@PandaArmy-fy5zh4 жыл бұрын
Fun to watch.
@mcscheck2000 Жыл бұрын
Good job, but I don't understand why you took the timing cover apart...
@TechKnowCSS Жыл бұрын
BECAUSE YOU MUST REMOVE THE TIMING CHAIN UNDER THE COVER TO REMOVE THE HEAD. I DID NOT TAKE THE TIMING COVER APART BECAUSE THERE IS NOTHING ON THE COVER BUT THE OIL PUMP WHICH I NEVER MESSED WITH.
@kam.p52565 жыл бұрын
Hey how'd everything go afterwards on this car?
@TechKnowCSS4 жыл бұрын
STILL RUNNING PERFECT.
@jamesmangum76147 ай бұрын
How long did it take you start to finish?
@Devo19873 жыл бұрын
Do you have a link for a new cam for 1998 Saturn sl1 SOHC ?
@TechKnowCSS3 жыл бұрын
A PERFORMANCE CAM? THE CAM PRETTY MUCH JUST SLIDES OUT AFTER YOU REMOVE THE TWO ROCKER BARS. BUT THERE IS A PLACE WHERE FOR ABOUT $250 FREE SHIPPING ROUND TRIP THEY SEND YOU A COMPLETE REBUILT HEAD AND DON'T CHARGE YOU CORE UNLESS YOU DO NOT RETURN YOUR OLD ONE WITHIN 30 DAYS AND IT FITS IN THE BOX THE NEW ONE CAME IN AND SHIPPING LABEL IS ALREADY THERE PRE PAID.
@Devo19874 жыл бұрын
How hard it this job ?
@TechKnowCSS4 жыл бұрын
IT DEPENDS ON IF YOU HAVE DONE SOMETHING LIKE THIS BEFORE.
@Devo19874 жыл бұрын
@@TechKnowCSS not yet but i do have alot ob basic tools
@TechKnowCSS4 жыл бұрын
ALSO THERE IS A KNOWN DEFECT WITH THE HEADS ON THESE THAT GETS OIL IN WATER BUT NOT WATER IN THE OIL. ON THE END VALVE BOLT ON #4 THEY CRACK
@Devo19874 жыл бұрын
@@TechKnowCSS so for a person new to this vehiclle on head gasket repair 1-10 1being easy and 10 being worst How would you rate this repair nite I have done every other repair on many different vehicles I figure I try and lear kust a little bit more :-)
@TechKnowCSS4 жыл бұрын
@@Devo1987 RATE IT A 4.5 JUST MAKE SURE THE HEAD IS NOT CRACKED AT ROCKER BOLT ON #4 VALVES