Рет қаралды 82,305
In this video you will see how to open the transmission casing to be able to disassemble the clutch bell and clean it, in order to eliminate those annoying tears that are felt when starting off the scooter from a standstill. I do this every 4000km at most. when the tears recur in a very annoying way. Furthermore, if you rarely clean, first remove the bulk of the dirt with disposable workshop paper, and then pass both the clutch linings and the inside of the bell with 400 grit sandpaper. When I have time I will replace the original Kymco clutch with a Malossi fly clutch. I will make the video so you will see how to do the operation. Goodbye everyone! :-) First you will have to disassemble the scooter fairing, I leave you the link of the video guide on how to do it! :-)