Scooter Front Suspension arm replacement PART 1

Scooter tends to drift to one side due to suspension arm issues.
Removal and replacement of suspension arms bushes and stub - axles
SUBSCRIBE and LIKE we will answer any question you have & you can email us direct on [e-mail] or contact us on
www.nithsdale-...

[@cliveharmsworth2894]

Great to see you back Tom. Good to see a real time video.

[@blackdotkiller1]

Great to see you back 👩‍🦼👍

[@asimullah7812]

Yes

[@josephmirigliano8728]

I enjoy watching as well

[@ErfeeIsmail]

Love your channel!

[@GhostvaperYT]

hi mate great video. i have rascal ventura. my problem is I must have 2 hands on tiller as steering turns too easily! if i go over the smallest of stones my steering turns! Can only ride straight at full speed with 2 hands on wheel. i have de-flated my front tyres in an attempt to make steering heavier/harder to turn. so my question is how can i make steering heavier? harder to turn? should i just tighten up all bolts on the arms? thanks

[@tomjacques4]

Most customers want easy steering. The reason for this is the type of low profile tyres fitted. They are also narrow and move into any uneaven ruts in the road / path. Naturally the more air pressure the easier it will be to steer. Check to top and bottom stub bolts could tighten them a little more that may help.

[@GhostvaperYT]

@@tomjacques4 ok thank you. yeah i understand old people want to go slow and have light steering but I fly along on my unlocked scooter which I programmed the rhino controller for max speed/takeoff. i am 47 not an old grandad yet! - i can get about 12mph limited only by the batteries power. So me doing 12 mph is not great when the steering suddenly turns on a bump! nearly flipped it a few times now. so i want heavier steering so i can ride one handed while vaping. perhaps i will also deflate front tyres a small bit. ill certainly look at those bolts you mentioned.

[@andrewm514]

Happy Easter shipmate. Hope you're keeping well.

[@tomjacques4]

Happy Easter All stay safe

[@anthonyhall713]

I got tga breeze S4 the the wheels are catching on the wheel arch what is the solution

[@tomjacques4]

difficult to say but looks like somthings broken or worn if its the back then check the body panel, if its the front then check tyre pressure and suspension.

[@anthonyhall713]

@@tomjacques4 it's the front it's been in twice for the same thing there say it been fix when I go out on it when I go down the drop down for wheelchairs and scooters then whe it catches the wheel arch

[@tomjacques4]

@@anthonyhall713 difficult to say but sounds like somethings bent

[@ballkeeper6662]

i have tga s4 and it feels like the tiler ir steering loose not sure even how to take the body bits off to see if something needs tightening or some thing

[@tomjacques4]

Check to see where it’s loose before dismantling. You should be able to see the linkages without removing and panels.

[@ballkeeper6662]

@@tomjacques4 what the ball joints things ? will check at the w/e

[@tomjacques4]

@@ballkeeper6662 yes

[@chrissmo7397]

Where to get that lift (stand-up) is it reliable for 100 kg scooters? Thanks in advance

[@tomjacques4]

It’s a metal shoe rack. Mind you it does not heed to support much wait as it’s balanced

[@asimullah7812]

@@tomjacques4 me

[@asimullah7812]

Call

[@asimullah7812]

Call me 📞

[@asimullah7812]

Please 🙏🙏

[@asimullah7812]

Hello