Mobility Scooter Front Suspension arm replacement Part 2

[@davebarber2196]

Very informative video. I have probably watched all your video’s by no as I said very interesting and informative. It would be nice on future updates that you show a test drive upon completion of the repair. It’s only a thought but it would bring a closure to the work done. Keep the videos coming

[@josephmirigliano8728]

I enjoy watching these type of videos

[@ElTelBaby]

Have U ever had a request to make the suspension softer... My Sterling Elite XS need to B made softer... If U travel over a 2" bump the scooter bounces nearly 2" up Instead of compressing 2" That plays havok with my back... My springs have pretension to 2 & 7/8" (72mm) Spring thickness is a tad under 1/4" (5.62mm) Would increasing the preload make worse or better...

[@tomjacques4]

What type of tyres are fitted pneumatic or solids and low profiles?

[@ElTelBaby]

@@tomjacques4 Pneumatic with inner tube & some puncture resist type gel that I've added...

[@ElTelBaby]

@@tomjacques4 ... Sterling Elite XS Tyres 13 x 5.00 - 6 Rim size 8" (150) Load Range B Measuring across the Tyre width is 4 1/8" ...

[@paulhicken3193]

I just brought a care co zoom the front handle bars grip are looking grubby can you do a video to replace the foam grips please

[@tomjacques4]

Sorry too easy. We sell the foam handgrips just add WD 40 they will slip on easy. Then the WD 40 will evaporate should leave it solid.

[@paulhicken3193]

@@tomjacques4 how much are they in total for that model ?

[@tomjacques4]

@@paulhicken3193 sorry you will need to go to care co we sell the hand grips that you can cut link below www.nithsdale-wheelchairs.com/handgrips.html

[@paulhicken3193]

@@tomjacques4 when I put the scooter together from the boot of my car it never goes together easy I have to use some force to make it join any ideas of what can be the problem I have oiled the items that connect but it can still be a pain when joining both parts of the scooter together any help will be appreciated.

[@anthonyhall713]

I got a breeze S4 the wheels catching on the wheels cathin on the wheel arch

[@brianfindsall]

Hi Please could you advise. my kymco maxi xls has developed a seat wobble. it seams a very vague fitting and almost slips and feels has if its going to turn around whilst being driven . also when driving along pavements i really have to grip the tiller and stop scooter from deveating from its course. i have checked the steering is tight and it appears to have no free movement when tested, so is this having to grip the tiller normal whilst driving on pavement. any help advice would be very welcome. Thankyou. Regards Bri

[@shirleybaldwin974]

Yes I have a Strider scooter it is flashing 8 times not moving forward or backwards can you help

[@cliveharmsworth2894]

Good job thank you.

[@darrencowley8265]

Hi I love your videos I don't like TGA scooters I have a pride Colt executive scooter it is a great scooter 👍

[@كاظمالابراهيمي-ط8ث]

شكرا استاذ

[@كاظمالابراهيمي-ط8ث]

ترجمة عربي

[@tomjacques4]

Sorry don’t speak that language hope someone can translate.

[@manfredseis5492]

تحتاج إلى النقر فوق الترس الموجود على يمين الفيديو ثم الترجمة الإنجليزية ثم الترجمة التلقائية وتحديد لغتك. العربية أيضا ممثلة في القائمة. :-)