Scooter / Motorcycle Ignition Performance CDI gy6 150cc

Glixal GY6 Racing Blue CDI amzn.to/35jegg5
Chinese Scooter Service Manual amzn.to/2LBfWb8
Subscribe to my youtube channel bit.ly/2Rcxr41
Donate to Virberello for Parts rb.gy/gzrtit
AC-fired and NO REV LIMIT
Material of body: Alloy
Connector: 2+4 Pin
Reset the ignition advance curve for better acceleration.
This video will help you to install a racing cdi on your scooter
I hope you like the video and Thank you for watching

[@FKtdyvan]

Thank you for your demonstration on how to install the C.D.I racing ignition coil on your scooter.

[@VirberelloScooterTips]

Thank you for watching my video

[@barbvolz1668]

I think this man knows his stuff, cute too!

[@VirberelloScooterTips]

Hello Barb thank you for watching my video

[@juman130]

Yo tengo esa misma scooter ! GRACIAS POR EL VIDEO

[@91ninjazx75]

Bravo!!! Wonderful video. Very well done. Thank you.

[@VirberelloScooterTips]

Thank you my friend and thank you for watching my video

[@kachiskid]

Great video brother!

[@rogerraven6976]

Hi. Thank you for a good video. I always buy the blue one because it has the wires sticking out. Makes it more easy to adjust it to different pinout and plugs. Oh and you are absolutely right, it doesn't matter that much what cdi you use it will not enhance performance unless the old one was broken. The blue one has a blinking diode too, nice option. 😆

[@VirberelloScooterTips]

Thank you for watching my video

[@bobcranberries5853]

Thank you Mario

[@GarageVegaUS]

The best cdi is made in Taiwan. This one is ok compare to the rest. God bless you you do a good job with your videos. I really apreciate what you do thank you!

[@VirberelloScooterTips]

Thank you for your kind words and appreciation!

[@verofpv6152]

I ordered mine with an ignition timing adjustment, there the clear type, then u can advance the timing to your likening and definitely get a liitle more power. There also the same price.

[@cubanyc5025]

🔥🔥🔥🔥

[@VirberelloScooterTips]

Hello Cuba NYC thank you for watching my video

[@estabanc546]

If anyone has a TAO scooter, it's under the handle bar hood. Took me forever to find it. But it's right there

[@VirberelloScooterTips]

Hello Estaban thank you for sharing the location of the cdi on the Tao scooter

[@game.head6825]

I was just thinking about your video on value adjustment for my 150cc what should I put them to to get the bike started?

[@fashionstreet1]

Wholla exactly what I need virberello this video was right on time I have to get me one of those CDI! Peace

[@VirberelloScooterTips]

Thank you for watching my video

[@spidervenom3341]

Thanks for your honesty in these videos...I noticed that all the blue one did vs the black one was quicker acceleration not necessarily too end improvement but I get up to 30mph about 3 seconds sooner..Now I've noticed I have a flickering blinker light when it's in idle,but for the life of me I can't figure out what is causing it..

[@VirberelloScooterTips]

Thank you for watching my video and for the blinker could be the blinker relay or the wires connections

[@beecy2317]

Hi thk fr the nice video can u show us how to test ac cdi

[@2ndspingarage]

The adjustable timing is nice, the stock isn't adjustable.

[@justintime2993]

Hi there again, hey my friend, I just got my complete harness, for cdi hook ups it on gives me one green to the cdi, What am I suppose to do with the missing green thats suppose to be there? Can I run one wire to the frame? (Blue cdi) harness for 6 pole, 4 pin regulator.

[@edwardjames6023]

The blue one gave me a noticeable boost. When it broke and I went back to my regular one things went slow

[@chantakzee]

How long did it last ? It's not that expensive but I don't want to be stranded when it blows.

[@vamountainman2512]

@Christian B. from the best of my understanding they are quite effective at helping 0-40mph times on the 150cc scooters. I think one youtube seen a 5 second improvement on his 150cc. From 15 to 10 seconds in a 0-40mph pull

[@adamkoch3452]

You gotta be in Hialeah brooooo 😂

[@VirberelloScooterTips]

No Palm Beach county ah ah ah but very close to Hialeah 👍

[@jeffmee763]

With the sport cdi it's harder to start when cold do you get this as well put back on the black one and it starts a lot better.

[@VirberelloScooterTips]

Hello my friend that is possible but sometime could be the gap at the spark plug

[@chucklesy]

How do the different cdi's affect fuel consumption at all speeds?

[@stanleyvandeventer1678]

Hi Virberello, my scooter struggles to start and if I get it to start (which would be a miracle) it loses power when i accelerate at high rpm, sound like it is not getting air and sputters. I have already checked out all your other videos on how to clean the carb, change spark plug, change oil and air filter is good plus petvalve and fuel filter is good. The feeling i am getting is that it might be the cdi. Can I test the cdi or should i just replace it and should i also test or replace the coil that goes to the spark plug. Thank you again for your amazing videos.

[@VirberelloScooterTips]

Hello my friend you need to adjust the valves I have the feeling that is your problem check this video kzbin.info/www/bejne/maSrY4V9q72Ynas look like that your valves are not closing properly and at the moment of the spark . Thank you for watching my video my friend

[@ironhead320]

I hooked one of these up and the green light don't come on and it gave me a mis at idle the one thing it did was raise my idle a little

[@thedaydreamer7972]

Hi, I just got my hands on a Lance 150 4 stroke, but I noticed no CDI, I think I located the cut wires for the CDI white\black red\black blue\yellow green black yellow,,,However, how would I know If its AC or DC wiring, does it really matter? TY for your hard work

[@VirberelloScooterTips]

Hello my friend DC cdi are larger in size but I think that lance 150 they have the ac cdi

[@johnnyclaimerhaddadin195]

If anyone has an Amiga Jax 150cc it’s located on the lower right side close to the spark plug. But I’m seriously considering not getting one since you said it’s a waste of money

[@VirberelloScooterTips]

Thank you for watching my video

[@robertaskancys7308]

Hello I have a question if cdi is rly old do is possible cuz coil gonna be destroyed because of old cdi? Or not? Thank you for vids nice!

[@VirberelloScooterTips]

Hello yes that is possible that the cdi could send extra voltage that the coil do not need at the moment

[@nourabdou853]

Thanks for the video it was very very helpful to me, but I have a problem belonging the cdi, I have a scooter Garelli XO 200cc, I tried many different types of cdi, but I couldn't turn my Moto on, can you help to dissolve this. Thank you

[@jamesturner1935]

Try the spark plug first, then the CDI, then the coil, then a new Stator

[@jamesturner1935]

check to see if the spark plug is getting spark

[@mitropoulosilias]

try to see the wire in a repair manual of your bike an be sure you connect them accordinglly. check for spark in spark plug.

[@georgeamer5139]

ok

[@FKtdyvan]

I tried to attach that blue C.D.I. to 150cc Taotao scooter, but it does not have the same connections as the old one being replaced. Is there another type of the blue C.D.I. with connections that will fit the connectors that were on the old C.D.I.?

[@VirberelloScooterTips]

Hello my friend so you have a 5 pins cdi check this link amzn.to/2XT7kzy

[@jamesturner1935]

what year is your TAO 150cc? I have a 2019 tao 150cc and it is AC fired and 6 pin with two connectors

[@lougeebabera5376]

Good evening sr. Im luijie from Philippines 🇵🇭. I have a question? Can i use that cdi for my scooter 125?

[@VirberelloScooterTips]

Hello my friend yes the cdi is good for 125 scooter. Thank you for watching my video

[@Tarad65]

i have n amigo bello 150cc. every cdi i see says 6 pin. Mine has 3 wires into the bif plug and 1 into the small one. how do i know which to buy?

[@VirberelloScooterTips]

Hello I see 3 pins CDI on Alixepress tinyurl.com/22fxv3vp but you have to make sure they fit your connections

[@Tarad65]

@@VirberelloScooterTips my cdi has 6 pins with 3 wires on 4 pin side and 1 wire on 2 pin side. will the one you're installing work?

[@Strict30]

Every CDI I have gotten doesn't work bro do I need an ignition coil for it too work? I have two blues ones

[@VirberelloScooterTips]

Hello my friend if you switch to a new cdi is possible that the problem is in the coil or the pick up at the stator

[@Strict30]

@@VirberelloScooterTips so to get a new CDI the stator would have to be changed.

[@Strict30]

@@VirberelloScooterTips hi, so stock coil isn't stronger enough to handle the CDI?

[@VirberelloScooterTips]

@@Strict30 Stock coil is ok but if you do not have a spark and you have a new cdi the other things that can be bad could be the coil or the wire or the pickup at the stator

[@jamesturner1935]

I have had a brand new blue one go bad after a month. They are made in China...try a japanese made one called Naraku or NCY brand

[@bradleycasady9810]

I have the New progress Racing CDI (blue) Guaranteed to improve performance and easier starts. $16.50+ shipping I also got a New Performance coil spark plug wire (orange) $6.50+shipping Don't no if it will help my scooter any..49cc gy-6...2008. Im Installing them tomorrow 👍 Thanks for the video it help alot

[@mrlegend9225]

Did you notice any difference?

[@Tonkab83]

can you send a cdi box to me in Sweden?😊

[@EduardoGarcia-fj2uc]

How about racing ignition coils?

[@VirberelloScooterTips]

Hello Eduardo I did not try one yet but they say they working great like Ncy racing ignition coil. thank you for watching my video

[@roybray8741]

Do u have to upgrade starter selnoid

[@VirberelloScooterTips]

Hello my friend no you do not need to update the selenoid thank you for watching my video

[@roybray8741]

@@VirberelloScooterTips do u have fb I'm gona need help with mine not getting gas I searched it up prob peacock

[@VirberelloScooterTips]

@@roybray8741 facebook.com/virberello or place your question on Chinese Project Scooters on facebook I'm in the group there too

[@almarjan4093]

where can i get an 8pin cdi for 150cc linhai scooter

[@VirberelloScooterTips]

Partsforscooter dot com they have lots of pats

[@MendozaMuziick]

I have a 150cc I try putting that cdi on mines and my scooter wouldn’t start with it I had to put it’s original one back on (Any tips?)

[@VirberelloScooterTips]

Hello Mendoza never happen to me yet but anything is possible with these cheap parts could that be a defective cdi so if you can you can send back the part a reorder and from there we can see or you can buy a Nibbi cdi but at the end the best reliable cdi is the stock one . Thank you for watching my video and be safe

[@dedeabsrn8044]

Recommend blue CDI, scooter gy6 80cc

[@VirberelloScooterTips]

Hello my friend the Blue CDI in my scooter is working great I Recommend the CDI for 80cc

[@dedeabsrn8044]

@@VirberelloScooterTips thanks

[@genevabarrio2671]

I cant seem to see my cdi i have a 139qmb

[@VirberelloScooterTips]

Hello Geneva on your scooter you should have the cdi in front of the valve cover or next to the battery. Thank you for watching my video

[@enginer804]

Blue Performance CDI benefit, do you recommend it?

[@VirberelloScooterTips]

Hello yes the blue cdi is great is working for me for the last year and is performing great amzn.to/35jegg5 after 1 year I recommend this product. Thank you for watching my video

[@vamountainman2512]

I hear they make a pretty decent improvement on the 0-40mph times and little else. But getting going a bit faster is never a bad thing!

[@bradtownes32]

Its made mine go slower

[@VirberelloScooterTips]

Hello bradtownes32 I understand you this cdi they are ok but they do not have consistence on the quality for the price many time they do not perform right and sometimes they do not even work. Thank you for watching my video

[@shariarbishal4293]

Will this cdi work on 150cc bikes?

[@VirberelloScooterTips]

Hello I not sure about that you have to research online. Thank you for watching my video

[@dezmaloydmoore2661]

Yes, it works for it!

[@jamesturner1935]

ebay has them blue racing one for less than 12 bucks

[@abhiyansubba5378]

ok ok ok lol

[@mrmiracle9956]

I think my cdi box is next to my battery 🤔

[@VirberelloScooterTips]

Hello Jay yes in some scooter they place them next to the battery

[@peterkluge9833]

hi how are you why my 150 scooter dont have power in up hill

[@VirberelloScooterTips]

Hello if you have a gy6 150cc and you do not have much power up hill there is a possibility that your roller weight are almost finish and need to be change or you have a dirty air filter or you need to up jet your carburetor. Thank you for watching my video

[@jamesturner1935]

Try to put a yellow torque spring in the CVT, or a big bore kit. My stock 150cc went uphill at 45mph, but now I can go 60mph uphill with the racing clutch and torque spring and clutch springs of RED. It is bored to 180cc.

[@jamesturner1935]

a red torque spring will give more speed uphill

[@jamesturner1935]

It could be your Carburetor also