This Scan Tool Destroyed My Car and I'm Mad as Hell

[@scottykilmer]

20 Car Myths Stupid People Fall For: kzbin.info/www/bejne/o4G7mGCEZ52lkNU Thanks for watching! Like and Subscribe for More Vids Daily ► kzbin.info/door/uxpxCCevIlF-k-K5YU8XPA ⬇️Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: amzn.to/2nfvmaD 2. Mid-Grade Scan Tool: amzn.to/33dKI0k 3. My Fancy (Originally $5,000) Professional Scan Tool: amzn.to/31khBXC 4. Cheap Scan Tool: amzn.to/2D8Tvae 5. Dash Cam (Every Car Should Have One): amzn.to/2YQW36t 6. Basic Mechanic Tool Set: amzn.to/2tEr6Ce 7. Professional Socket Set: amzn.to/2Bzmccg 8. Ratcheting Wrench Set: amzn.to/2BQjj8A 9. No Charging Required Car Jump Starter: amzn.to/3i7SH5D 10. Battery Pack Car Jump Starter: amzn.to/2nrc6qR ⬇️ Things used in this video: 1. Common Sense 2. 4k Camera: amzn.to/2HkjavH 3. Camera Microphone: amzn.to/2Evn167 4. Camera Tripod: amzn.to/2Jwog8S 5. My computer for editing / uploading: amzn.to/301tYt9 🛠Check out the tools I use and highly recommend ► goo.gl/rwYt2y Subscribe and hit the notification bell! ► goo.gl/CFismN

[@Goddess1Princess]

hi scotty

[@rondhole]

I had 2x purchases with the Catalytic converter problems that showed up after driving it 200 miles later. It is shitty situation but in Florida, who cares, just keep reseting it every month or so. And sell it again by resetting it first. We have enough trees in Florida to clear the smoke from cars

[@sonyajones]

Hello Scotty, may I please ask for your recommendation for an OBDI scan tool for a 93 F-250? Thank you.

[@jacobtremblay3376]

HI Scotty I Have a 2009 Suzuki sx4 with 310 000 Km and it still drive and run great but I have this misfire P0303 code and sometimes p0304 . I've already change all spark plugs and coil pack but the error code keep coming back on cold starts most of the times, what could be the issue? (I dont have any power loss) thank you!

[@melchristian8876]

👍👍👍👍👍👍

[@DabblelyDiddly]

Love scotty man.... "THIS DESTORYED MY CAR!!!!" meanwhile nothing was broken.... and the tool worked....as well as it can at least...

[@MattM0481]

Brought a cheap, old scan tool with me when I bought a used car a month ago. No check engine light was on, but I pulled 3 codes. Saved me $500 off the price he was asking.

[@Deckedcello]

This guy is giving so much knowledge for free. I make sure to watch every single video so I can make sure my good old Corolla stays healthy

[@asdfghjqwertyu1858]

toyotas are reliable like trump.

[@nobodysfavourite6953]

My 2001 E11 is loving this channel

[@coloradoboo1071]

We got an 08 Corolla new and now our son is driving it...has 125,000 and no issues!!

[@ColinFromConnecticut]

Same with my Camry SE V6 he's so funny too man I laugh so hard everytime I watch him he's a hoot!

[@rishijai]

The Thailand made Corollas are garbage. The mechanics say they give a lot of trouble.

[@tonycarizzio5937]

Men like this who have spent their lives learning and dedicated to their craft, and, are willing to share that knowledge are absolute treasures. Thank You Scotty!

[@MikeyGarcia-r4d]

😂😂😂😂😂

[@jaminova_1969]

I have cheap Sears scan tool and it really helps alot! Went to look at a used car and the guy says, No check engine! Plugged in the tool and it lit up like the Apollo 13 computer!

[@Luke_SkyWalk3r]

this had me dyin 🤣

[@diehappy3997]

Houston we have a problem.

[@Luke_SkyWalk3r]

@Biggus Dickus I kissed your sister, too.

[@drevil2783]

Sweet

[@stuartbear922]

What did it tell you?

[@erickauffmann_official]

So the scan tool didn't destroy Scotty's car?

[@staterafukumoto]

no, but he tricked us into learning

[@BillehBobJoe]

no. its just despite his "old fart" appearance the man knows how to work a KZbin algorithm

[@erickauffmann_official]

@@BillehBobJoe i never know what the video is really is about until halfway in

[@elzar760]

One of the few channels I’ll come to even though…

[@davidhammond8098]

@@BillehBobJoe he does make 1.5 million a year from KZbin

[@mattmayo3539]

Scan tools on modern cars are mandatory. Otherwise you’re just shooting in the dark. Good luck!

[@americanaxetoolco2076]

Oh yeah!

[@fixitallpaul4847]

I wonder when a scan tool will be built into the vehicle. Edit I said I wonder when. I didnt say I thought it was a good idea. The ability to manipulate the consumer is exactly why I wonder about this.

[@tulus38]

@@fixitallpaul4847 I'd rather to use standalone scan tools. If it's built in to the car it can be manipulated easier, so eh

[@AlGoYoSu]

@@fixitallpaul4847 if it was up to the manufacturers (and dealers) you wouldn't be able to scan/fix your own car, and you would have to take it into the dealer. Be thankful that the OBDII requirement is written into law. Although this hasn't stopped manufacturers from putting barriers in place to stop people from fixing their own cars anyway. When the manufacturers are donating millions to fight right to repair legislation you can see what direction they really want to go in.

[@timothyangelosanto9668]

Some guys are ok shooting blanks others want a baby lol

[@zanesutherland406]

I bought a Blue Driver back when you first reviewed it. Last winter my check engine light came on in my Passat TDI and it had a hard time starting, especially in the cold. I plugged in the scanner, it told me it was the glow plugs were bad. I think it even told me which one it was. I ordered the parts and replaced all the glow plugs myself for good measure and it’s started great ever since 😃. Thank you for sharing your knowledge with us Scotty! I watch all your videos and it’s save me, my family, and friends a lot of headache and lost money.

[@donjohnson3701]

Keep cranking these videos out Scotty! It doesn’t matter what the subject is-it’s new to me and I always learn something! You are a treasure of info for diy’ers. Tremendous thanks.

[@joleneguerrero4794]

I thought he retired from making videos last year?

[@Silkroads733]

I like to think of myself as a experienced mechanic and auto electrican but this dude is up to his eyeballs in knowledge, and he's not one of those egotistical folks like some. good on him..

[@jayhockley8841]

Lots of dishonest people will disconnect the battery before you go check out the car they are selling . That ( temporarily) clears the check engine light UNTIL the monitors have time to reset them . A scanner will tell you if the Computer Monitors are set or not . Dont buy a car if the monitors are not set or you may have codes show up once they re-set .

[@aaronthomas6155]

That doesn't work on OBD2 vehicles. Codes are stored in NVRAM. Disconnecting the battery won't clear NVRAM. The NV part literally means "non-volatile".... The codes actually have to be cleared and a quality scan tool (such as an OBDLink LX or MX/MX+ with OBDLink software) can tell you how many miles the vehicle has travelled since codes were cleared, or how many times the vehicle has been started since codes were cleared.

[@jayhockley8841]

@@aaronthomas6155 But it does turn off the check engine light on odb 2 cars . Try it ! I had people do it right before I showed up and then say the battery went dead.

[@davidhammond8098]

I missed the part where the scan tool destroyed his car

[@emmachamberlain7587]

And me !

[@curtiswilson4737]

It's probably a glitch. It happens.

[@MyTube012]

Possibly a 20 second misfire Senior moment ?

[@rudiwendt5278]

It's at the very end.

[@seanb3516]

@@rudiwendt5278 Are we still talking about the Scan Tool?

[@Asto508]

That 20 seconds headlight on is actually a really good simple test of the battery. If you have a borderline dead battery, turning on the headlights without the alternator running drains the battery extremely fast (it's 2 light bulbs draining about 4amps each, nothing else drains that much on the car) and you can see the voltage drop from 13+ down to 12 in a few seconds. If you then try to crank the engine, the battery can already be drained enough that you can barely start the engine, if at all. I know this because I went through this mess. Oh, and to give you credits. The bad battery was also the cause of rough idling and bad acceleration because the spark plugs weren't properly provided with stable voltage since the battery has a buffer function in the overall system and the alternator isn't a reliable stable source of voltage.

[@BdeJJG]

💯

[@ert-wert]

My 220amp h.o alternator on my 1.8l laughs at the accusation of not being a reliable source of amperage

[@Asto508]

@@ert-wert Your point is granted. I missed to point out that it may also just be an issue with weak or bad alternators in conjunction with bad batteries and if the alternator is dimensioned in a such way that it can easily dish out all the energy needed ten it probably won't cause issues. But most people have factory alternators which are much weaker than 220A. The displacement of your engine is rather irrelevant in that topic btw

[@ert-wert]

@@Asto508 smaller engine - smaller belt - smaller alternator??? Thats what I was figuring

[@Asto508]

@@ert-wert it’s about the pulley dimensions and those don’t really scale up that much from smaller to larger engines. The difference between 1l and 3l+ engines is sometimes not even 30% in crankshaft pulley diameter. Alternator pulleys are mostly also the same size. So, 1000 rpm on a larger engine generates not much more rpm on the alternator than a small 1.0l engine.

[@linuxman0]

I wonder how a used auto dealership would react to someone showing up to their lot with a scan tool. If they don't let you plug-in, that would tell you something.

[@shoyrushoyru]

id also imagine they wouldnt let you test drive a car long enough to get real readings on a scan tool either

[@barrygoodson4952]

I doubt the dealership would care. They mostly hire anyone and generally may have one decent mechanic and a bunch of parts changers posing as mechanics. Unless it's warrant work the dealer is the last place I would take my car !

[@chrischris7805]

From my experience the salesman doesn't mind at all.

[@elttabykcir]

Not necessarily, some people might have the cheap testers that can damage the computer! So, I do understand if the car dealership don't allow it. It makes a lot of sense to me!

[@kenliu808]

So Scotty which scan tool ruined your and you are mad as hell??

[@francisco5434]

I was in a shop having my tire replaced and a young man next to me and I got talking. He was trying to resurrect a 1995 car with a bad A/C, I told him he was better off buying a car later than 1995 when they changed over to the new coolant, because the no one is importing Freon any more and it's almost impossible to find anyone able or willing. I told him that a conversion would cost around $2K and an older car probably wasn't worth it unless it was a classic of some kind. I went on to tell him that I had just gone through the used car shopping process after watching a lot of Scotty's advice on inspections, engine and transmission 101's, and scanner tools. He asked the owner how much a conversion would cost. "About $2K." I told him about Scotty and he checked on his phone and seemed quite eager to view the huge list of videos, including the one on scan tools like this one. The manager of the shop overheard me and said, "I've got to stop you there. I can't tell you how many times some guy comes in hear with a home diag from one of those cheap tools, and it's totally wrong." I asked, "You use a professional $5K scanner right?" "Yes, I do." "Of course; you own a shop, and you use it nearly daily, so you can justify it. I just need something to show me any red flags, which my cheap tool did great. I caught a guy who tried clearing his check-engine light, and another who had some weird readings that a test drive confirmed was not accelerating right. I skipped both those vehicles. How much would you charge to check out a car for me if I brought one in here?" "A hundred bucks." "That's reasonable, but I checked out ten cars before I picked one. I couldn't afford to bring them all in here to take advantage of your pro scanner. That tool was well worth it to me." The young man was still busy checking out the list of Scotty's videos like someone who had just discovered a guru.

[@bannionab194]

Scan Tool Network - Mileage Correction.... Even more harmful to your car!!.

[@FaithwalkerTodd]

We bought a scan tool on your advice quite a while back. Fortunately we had it with us when we were traveling with the class C RV on a Sprinter chassis. It kept going into limp mode, reducing our speed to a crawl. It turned out the fuel filter was dirty. Replacing it solved the problem. But if we weren’t able to reset and get out of limp mode it would have sucked.

[@Semiam1]

Great story

[@1southsoon]

I too have one for my Sprinter. Mercedes is very picky and I had to buy a very expensive scan tool. The expensive ones are needed for some complex features of the vehicle.

[@MyTube012]

Todd , that's really COOL that you were able to diagnose your RV, when you were on vacation, eliminating down time and having to pay for the high costs of having a mechanic do it!

[@FaithwalkerTodd]

edgar aragon We still had a mechanic replace it, we were on a trip and we didn’t have the tools far away from home. But if I had to crawl it would’ve taken a long time and I wouldn’t be able to schedule the repair down the road in a shop of my choice. We were stuck on the side of the interstate. Just being able to continue made that little machine worth it’s weight in gold.

[@bobdobbs7828]

Cool story bro, big if true.

[@stephen6815970]

My Bluedriver arrived today per your recommended tools link. Zeroed in on the service engine alert on my wife’s car within one minute of use. Small fix, $27 part, but she wants a garage to change the part. Next test will be driving the car around and see if anything else trips. Thank you Scotty!

[@xSpiritAWx]

Scotty gets pulled over by the police 👮‍♀️ Police:Keep your hands where we can see them. Scotty:No problem 🤚 ✋

[@jgormley]

Police: Sir! No sudden movements! Scotty: Uh oh

[@longbow6416]

And starts filming and telling everyone why the Crown Vic was so much better than the Charger.

[@rogertycholiz2218]

Tony D. - I really like Scotty but.........his wild hand gestures are really distracting.

[@jed-henrywitkowski6470]

@@longbow6416 Cop: I knew it!

[@blogengeezer4507]

@@rogertycholiz2218 -Just realize that 'background' is always present in every visual. Eventually, as the brain adapts, the 'background' fades into nonexistence. ;}

[@craigslistrro709]

He isnt wrong.. I picked one up at harbor freight, diagnosed all the codes my Camry was throwing, 1 by one I tracked down the problems and fixed them all...Its great that he explains what graphs mean and when the percentages are acceptable... Gotta love this guy.

[@pamelaf5913]

Harbor Freight is legit ?thought was a scam site how many things you ever bought from any warnings welcome!

[@theredpillneo2296]

@@pamelaf5913not scam just know. for cheap tools but they are lokey pretty good now

[@jake9705]

Scotty: "This scan tool destroyed my car and I'm mad as hell!" **proceeds to give a glowing review of the scan tool**

[@Ryan96se]

I have a story that fits this video perfectly. My car has 325K miles on it. It's a 1996 Ford Probe SE. It has two catalytic converters. A primary and a secondary. The O2 sensors only monitor the Primary inside the front engine exhaust manifold. Anyway, the secondary converter started rattling and the car was showing a P0421 cat below efficiency code so I had it replaced. The code remained so I figured that the primary converter with 325K miles was going out...it's old. That cost 1000's and that's if you could find a good one. I ignored the code because VA doesn't perform emission testing and drove for years with that code. One day my muffler started getting holes in it so I had it replaced. When I got the car back after the muffler replacement, it had lots more power. I asked to see my old muffler and shook it. All kinds of white chalky dust came out of it. Come to find out, the secondary cat had blown chunks of debris in the muffler restricting the exhaust system and the computer was reading the improper flow through the primary converter as a converter issue. The light has stayed off and the car runs great now. So the converter was never the issue. It was the muffler plumb on the other end that was to blame the whole time.

[@josephtrunk3565]

I need to investigate this one as well. 05 Vue 274,000 miles has been throwing this code. Resetting it and it goes away for a while, but it comes back. Thanks for sharing your experience, greatly appreciated.

[@MB-rv9dx]

‘I don’t need no stinkin’ ABS’ - Scotty ‘Savage’ Kilmer

[@ChrisD4335]

I intentionally disconnect one wheel sensor to disable abs always anti lock brakes are the worst, its worth losing traction control.

[@paulmallery6719]

Pull fuses

[@papanam4267]

Hahaha! Funny 😄

[@Cheepchipsable]

@@ChrisD4335 LOL, some cars might throw a fit over that, so not recommended.

[@milespi5556]

A system normal drivers don't use but maybe once a year because rain or something bothers you, but those abs, traction, and CEL lights blinking and making noise. All day everyday do not.?

[@johnmitchell2741]

One thing he didn't mention is make sure your ignition is in the off position before plugging in or unplugging the scanner from your OBD port

[@GetTheFO]

I know this is a year after you posted this, but I’m curious what you mean. I’ve unplugged and plugged in my Autel into my ‘06 Colorado plenty of times in all varieties of ignition status with no issues, and have never heard of this issue before. Same with countless other vehicles and monitors. Only with OBD 1 systems am I aware of issues regarding KOEO/KOER status when using the devices. Is that what you’re referencing, or am I about to learn something new?

[@johnmitchell2741]

@@GetTheFO A lot of sensors have a five-volt reference signal going to them computers can be susceptible to voltage spikes when your pugging, or unplugged a connector to a component whether it be to a sensor, battery, or the data link connector i was always told in my schooling as an automotive technician its just good practice. The same goes for wearing a ground strap when working around printed circuit boards. you might get lucky 20 times its the one time you get a voltage spike that will cause you a lot of unnecessary grief.

[@GetTheFO]

@@johnmitchell2741 fair point! I’d honestly never really considered that before.

[@Gruin]

The tool will tell you key Off then on

[@mattpaws]

It's great Scotty is giving lessons in how to read scan tools. I know a car dealer that has one and can't determine the data shown. He once changed an accelerator pedal when the scan tool showed throttle sensor fault he actually needed to buy a new throttle body.

[@TheStoneWhisperer]

😂🤣🤣 OMG! This made my morning! The younger generation today! I'm not even an auto mechanic by ANY stretch of the imagination, but even I can generally identify every component under an Engine's hood! I helped a young friend out one day who could not identify ANYTHING under the hood! He knew what the radiator was, that was about it! Geeeezz! They should teach basic auto mechanics in the classroom!

[@rglservices7944]

What was the car's problem?

[@mattpaws]

@@rglservices7944 No acceleration

[@rglservices7944]

@@mattpaws ok good. I had to change the throttle body on my car because of no acceleration. but there is another problem. 1. the vehicle cannot reverse up a slope only on level road. 2 start vehicle and the idle rev stays high at 1.5. - 2 Until you put it in Drive

[@mattpaws]

@@rglservices7944 can't help you with that one I'm afraid I would guess it is a gearbox problem ask Scotty on his website he has helped me.

[@RipRoaringGarage]

How about a scan tool that can copy/reprogram ECUs, reset Airbag modules and all that...that ISNT subscription based and can stop working whenever the manufacturer wants?

[@roypetersen1400]

Where can I find one that is inexpensive

[@RipRoaringGarage]

@@roypetersen1400 Still looking myself. I ended up just going with the super duper top of the line Snap-on Zeus. (If it wasnt priced 3/4off I wouldnt have bought it. But, its just an overpriced touch screen computer (ok, I like that it has Windows 7 so I can load it with all of my checklists, but it cant communicate with Crown Vics, Grand Marquis, is only partially compatible with Mopars like the new ones, and is straight up not compatible at all with any 80s cars Whenever I get some cash, I will try the Autel scanners that are bidirectional. They were cheesy and hoaky back then but now, they have established themselves as reliable and decent...even if chinesium. Im already struggling with a car that has all kinds of issues, I cant diagnose. So your comment just reminds me of how frustrating this is, and its on purpose.

[@ecschindelbeck]

“Modern problems require modern solutions.”

[@drevil2783]

Or a big hammer. If that doesn't work a crusher comes to mind

[@dragospahontu]

@@drevil2783 lol

[@Ziedmac]

@@drevil2783 ah so thats why they call you dr evil lol

[@brianbaker359]

One of the very best of Scotty’s Videos, one topic thoroughly covered. Scotty is the absolute Best. Hello from Lake Talon, Ontario, Canada.

[@patrickzambori473]

love my blue driver! Need to give them to my kids as they leave the nest.

[@barryhoneycutt3894]

TY Scotty Kilmer, your Grandpa, and Dad gave you an education that has helped 100's of Thousands of people for FREE... wow your dad, and Grandpa would be proud sir... love ya from Texas Scotty - Orange, 100 Miles East on IH-10 ty so much learned a lot from you, well Grandpa and Dad... although i think you picked up mostly from Grandpa my Hero and lots of other folks, not many these days are honest and have integrity... #1 auto man for me.. wish you were in Beaumont, Tx or closer, if i would have known what i know now, Houston i would have come to see ya many times..ty again carry on! From, Texas Bear PS I KNOW your Grandpa and dad did not have the modern testers, but what impressed me more than anything, is that they taught you, common sense, honesty, and integrity, making a living, not a killing, helping others with word of mouth advertising... most of us are tired of being, "budaned" [screwed] and spending much money that is not necessary. TY Scotty Love ya Brother- continue to help all of those who cannot help themselves..TY TY TY Move to Beaumont, Texas i'll help you with the cost....honest Mechanics are a RARE phenomenon in this crazy time in America.... :) From Texas Bear only 23 miles from Beaumont!!!!!!!!!!!!!!!!!

[@jasongraner2442]

Scotty, that is one tool I’ve been wanting to buy for years. But just haven’t bought one. I’m tired of going to Auto Zone to get my vehicle scanned. I would enjoy having my own scan tool do my own scanning.

[@JesseMgala]

I bought the Innova 3020 or whatever. But I returned it because I'm not mechanically inclined.😂

[@kookietherapy9398]

What does Auto Zone charge? Curious.

[@NorCalJuggalo420]

@@kookietherapy9398 Autozone will read codes for free.

[@jasongraner2442]

@@kookietherapy9398 Auto Zone does not charge for scanning your vehicle!

[@kookietherapy9398]

@@jasongraner2442 Good to know if you are looking at a used vehicle on a weekend.

[@geronimo67]

After watching this video I was gonna get the Innova 5160rs and got the 5610 instead. No regrets. Works fine. It even helped me with the drive cycle to clear an incomplete monitor that I couldn't clear. I followed the instructions on the scan tool and the light went from blinking red to steady green immediately. I took the car in for a smog check right afterwards and it passed right away. Awesome!

[@michaelturner6659]

I bought that same scan tool to work on my vw. I wouldn't have bought it if I know what I know now. It's to late I've got the jetta. Hopefully I can fix it now.

[@LA_Native]

Which one would you have gotten instead?

[@malcolmtaylor111]

@@LA_Native Vag-Com was the vw specific system I used when I had my Jetta (10 years ago, it might not be around anymore, I don’t know).

[@damirzanne]

Scotty , I appreciate you sharing your experience and knowledge with strangers on the KZbin for free … respect

[@brianlee7738]

Scotty literally saves every car owners' lives.

[@pamike4873]

?? Right. The world's greatest mechanic saves the day. He's so good, he works out of his driveway. He's a douchbag.

[@meabob]

@@pamike4873 - well said

[@engellsd3198]

@@pamike4873 😳why

[@kenwinchester]

Thanks for explaining how to use some of the scan tool functions and more importantly how to interpret the data. I have an Innova 5210 scan tool and the owner’s manual doesn’t explain too many of the functions, but Scotty fills in the missing information. What a wealth of knowledge!

[@brandonduncan480]

Has anyone ever met a mechanic smarter than SCOTTY?? He's amazing!

[@rwd323]

Yea most mechanics

[@lowellstokes5328]

He’s ok, I don’t like the oversold headlines, but he does provide useful information. He’s probably more helpful for people just learning.

[@dundonrl]

Yep, actual mechanics.

[@danielwarren6845]

He hasn’t got a clue what he’s talking about. He just presents himself like he does.

[@s.castaneda8738]

@@danielwarren6845 if he scotty had no clue he won't have 10 MILLION followers, and i seen other mechanics looking @ YOU TUBE

[@haditahir9608]

I love you so freaking much Scotty, you're like the wise old Grandfather I never had. I'm having issues with my 2011 328i, at first I thought the transmission was slipping but I realized it's something related to valve timing, most likely VANOS, especially at 84k. That was a relief but I tried going to O'Reilly's today and used this exact scan tool minus the graph option and like you said, I'm in that no man's land where it's not throwing anything significant. That being said, I'm so glad the KZbin algorithm recommended this video at just the right time. When my personal mechanic comes to check on my car I'm gonna make sure he also runs tests on everything you listed in this video to make sure I don't miss anything or end up fixing what's not broken. What would we do without you Scotty? How do we repay you for your infinite knowledge and wisdom?

[@walterweddle7644]

I have to listen to you every day. Wife owns a Matrix. Great car!

[@ChicanoOne760]

Matrix are garbage. Go back and get a BMW

[@jrcook80]

@@ChicanoOne760i had a Matrix and it was amazing! So, unless you drive a Matrix, you wouldn't know how good a Matrix is.

[@jrcook80]

I agree. Had a 2007 Matrix myself. It was amazing. Mine was the red version of his with the tinted windows. Just didn't have the tinted tail lights he has. And oh yeah,I live 30 minutes from Toyota plant where it was manufactured in Cambridge, Ontario. .

[@TurboMountTV]

Uh.. WHAT Scan Tool Destroyed his car??

[@Ali.s_garage]

Hi Scotty I have a question is it ok if you drop a radiator drain plug o ring in the radiator accidentally? Will it damage my engine?

[@Dlutheran]

😂

[@hectordejesus4021]

Flush it out with a hose

[@hectordejesus4021]

It should come right out

[@Ali.s_garage]

@@Dlutheran 😢

[@johnmitchell2741]

You notice he's working on an older inline 4 banner.Try working on a newer Dodge V8 or even a lot of the newer 6cyl engines Dodge again where you have to remove the intake to even get to the coils or spark plugs

[@jayphagan5270]

Yep, like my Dodge Journey.

[@luisgonzalez3057]

One of my friends bought an Autel very simple one, I read the instructions and bleed his brakes with it, adjust his head lights and fix a problem with the brake pedal. He got a Buick Enclave, sad part of it he just got it back from GM dealer and they charge him over 300 bucks just for diagnostic.

[@keithnoneya]

Yeah dealers cost way to much due to Government Taxes/Fees and Mandates on those businesses. My dad moved to Apple Valley back in the 90's and wanted to get a job. He went to a local mechanic shop with two bays and no cars to be worked on. The owner said he really needed him but couldn't afford him. My dad was confused until the shop owner started listing all the California Laws that ACTUALLY made it financially impossible for him to hire my dad. So may dad said, well rent me the two stalls and I'll open a shop under my own name. The owner laughed and said sure. My dads shop, once word got out, always had cars waiting to be worked on. Dad did complain about the California Tax and Fee laws that made it almost impossible to make money working on cars. He had to live in a little run down shack just to be able to pay the bills. Yep shops and dealers cost a lot. So most of that $300.00 bucks didn't even go to the owner, it went into employee pay checks, benefits and Government Taxes and Fees to keep the shop open. That's why I do my own repairs unless it's a transmission or rear end. If you really want to find out who's ripping off customers go ask a business owner with employees how much of that bill is Government Taxes and Fees. Best Wishes and Blessings. Keith Noneya

[@mark4347]

@@keithnoneya But you have to pay your employees and pay to license your business. Of course only a small percentage goes to the owner, depending on shop rate and his management abilities. The thought that a business person who can't do things himself but needs employees keeping all of the money is ridiculous.

[@keithnoneya]

@@mark4347 I agree you have to pay your employees and pay license fees to open a business in the US. I also agree that a person to open a business to try and make money, and then give all of it to your employees would be ridiculous, unless your running a charity. So we agree, most of that $300.00 bucks didn't go to the business owner, it went into keeping the business open and pay Government taxes and fees. Best Wishes & Blessings. Keith Noneya

[@papanam4267]

@@keithnoneya Your Dad's story is the perfect example of why Toyota, Elon Musk, and a lot of other industries including Mom& Pop style operations are closing shop in California and going to other states and providing jobs to people in those other States!

[@chuckmckee2741]

I’m so sticking with older V8 and V6. Easy to fix and with the new laws coming out against them they are going to worth a lot more money

[@UltraMAGAKing2024]

I bought one you recommended a while ago, it made me feel safe when I checked and nabbed a Lincoln Towncar 2006 for $7,000 w/ 80K miles. Thank you Scotty!!!

[@richard180961]

Great tutorial, it helped me sort out my vehicle problem. Diagnosed EGR circuit failure. Car went to Limp mode. I noted also way too much oil had been put in during recent service almost 2 pints over. I pumped out excess oil, back to correct dip stick level, and fault now appears to be solved.

[@jamesnix9208]

I bought the Blue Driver and use it often; it works great! Be careful not to lose sight of it however, your friends, family and neighbors will be using regularly as well!

[@George_K1]

AT Minute 10:48, The screen shows "Note: Do not perform this test on Smart Alternator, Hybrid and Electric Vehicles" I used the INNOVA 3160rs and it KILLED MY ALTERNATOR TWICE... I WAS OUT $700, and that with my Mechanic charging me very little on labor. So, Scotty you say it could not damage your car, it did mine, and the tester did not WARN me why I should not run the Alternator test. IT would be helpful if you respond? I was not completely familiar with INNOVA 3160rs which is the model just before the one in the video, it has most function except the Dealer & Repair resets, and the 2-Way interactive tests.

[@TheReaI0ne]

Thank you for showing us exactly what's important to check for, Scotty. You sir, are a gentleman and a scholar

[@littleyoda99]

I've had a bluetooth tool for a few years now.. has saved me so many headaches and made it so much easier to figure out what is wrong. Everyone should have one!

[@dmo848]

Torque app

[@g5alive795]

Scotty... this vid. is faaantastic! Your videos are going to be helping generations to come! 🤗

[@labornurse]

What happens to someone's KZbin channel when they die though?

[@TheLizardKing1967]

10:09 - My 94' Celica don't have any Stinking Codes, But most of Ya'll have a Stinking Car Payment.... LOL

[@jeffreyeichelberger6550]

Nope

[@JamesJohnson-wo3dy]

I wish I had a vehicle without computures." I miss the old schools days!"

[@ag4allgood]

@@JamesJohnson-wo3dy Have you a feeler gauge you want to sell ?

[@Danny-lq7qe]

Mister Scotty, you are amazing. It was like getting advice from a dad. For 13:15 minutes I felt like a kid again. Thanks.

[@TechnoMageB5]

No destroyed car, but my ignorance on scan tools is destroyed. Well played, Scotty. Well played.

[@rvndmnmt1]

Have one of those things for work. Well, technically, harbor freight Zurich but it is an Innova. Does everything I need for brakes and suspensions and more. Paid $230 with an open box discount for a scanner that Innova sells for around twice the price. Worth every penny. Does most of what my coworkers $3000 Snap-On scanner does. Only downside is that it only goes up to 2018 currently, that I know of, but that is what updates are for. I don't make enough or do enough to justify a multi thousand dollar scan tool.

[@TheLizardKing1967]

Here's How a Smart Person Buys a Used Car. They Get on Craigslist and Pay $600.00 for a 94' Celica.

[@justintime2380]

I don't need NO stinking ABS brakes, O'Scotty knows how to drive! Love it! 😯👍

[@TorryGood]

My 1st vehicle a 1999 ford escort zx2 had no abs brakes man that was a learning curve and I drive that for 7 years before the transmission started having issues, that was in 2012 when I got it.

[@crashrethati5458]

Scotty you are a good man. I wish you were closer to Oregon so I could get to know ya better. Thanx for all you do!

[@2006renec]

Love your videos and car tips. From a life time Houstonian, sorry to hear you're no longer in Houston. Keep up the great work Scotty!

[@charlesdowns1691]

like. I need a good scan tool

[@unknowngrower3103]

Thank you for all your videos Scotty everybody in my family knows who you are because everyone has run into car problems and came across your videos hahah Thank you for all you do!

[@joekelley5121]

I own Blue Driver and it works well. However, it will kill the dashboard gauges and the OBD output after a few minutes. The gauges will start working again after the unit disconnects from the phone. I haven't been able to find a fix for it.

[@wertyfor]

This vid is rich with pro info, i really appreciate your depth of passion and knowledge.

[@corb0046]

I’ve got a challenge my 2006 Toyota Solara 3.3 sle v6…shows no codes,,,except it failed the last vacuum test….I get intermittent problems when you put your foot on the gas pedal the engine stalls or won’t go….I have yet to figure out the problem…I’m going to install a new ECM since I may have done something with my obd scanner

[@robertj.desantisdcdaapmcsc5718]

I love Scotty. I never fail to learn something and he is definitely entertaining in his presentation of what is otherwise rather dry material. High schools need more teachers like him to engage the students and keep them interested.

[@LubaLuba1]

Very creative but my situation is a little different if have light groves no pulsation on the rotors could I smooth them out with just replacing pads with new semi metallic ones?

[@LukeO-1234]

You're a good salesman. I want this scanner now 🤣🤦

[@6lemans10]

Met too.🤦🏿‍♂️

[@dukeduke3599]

I walked into autozone and ran out with this exact scan tool. They didn’t chase me and I came back the week after for another one.

[@lvgio]

8:25 but surely if the spark plug lead is damaged then switching number 1 with number 3 wouldn’t work, because one of the leads is still damaged?

[@310_Latchkey_kid]

Almost every time I watch scotty's videos I learn something new!

[@drevil2783]

Fact

[@tomchrisfield7348]

I learned that Scotty's scan tool makes a loud bird noise when testing. We shall him "Bird person".

[@tedtenny]

If you switch ignition coils from cylinder 3 to 1, aren't you messing with the spark timing?

[@elliotkrosinsky6199]

No, keep the same wires to the same cylinders

[@nondbfune9132]

That specific scan tool you're holding is kinda expensive but worth it.

[@chrisbraid2907]

Expensive is a relative term ... if you can’t afford one check the Bluetooth plug ins you can run from your tablet or iPad ...or phone ...

[@michaelhardesty3344]

Scotty I got a 97 f150 I've already changed the coils the plugs the wires the EGR valve the aftermarket air filter I've done a ton of work to this car and I still can't stop getting it from shaking and misfire and and it says the code comes up and misfire and plug five so I'm asking for some advice so I stopped throwing parts at this thing

[@bobwigg761]

It is rare to hear Scotty say “Parking Brake” instead of “Emergency Brake”.

[@don2deliver]

Newer ones are electronic parking brakes. They can't be deployed in an emergency, or in the snow for fun. They are only motor actuated and just apply the outer pad

[@bobwigg761]

@@don2deliver The design has changed over time, but the primary function hasn’t. Even though some could be used that way in some vehicles, I’ve never seen the word “Emergency” used for the name in the owner’s manual or inside a passenger vehicle. It is usually referred to as a Parking Brake, which is the primary function.

[@tbelding]

@@bobwigg761 - Correct. It's to stop your car from moving on inclines, putting enormous stress on the pawl in the transmission. If that shears, your car is not stopping for anything.

[@richsweeney1115]

@@don2deliver you can still use electronic ones in the snow, I've done it in a Buick verano

[@YuYoung1973]

Greetings Scotty. Don't know if you will see this but I will try. My mom has a 2006 Jeep Commander. Two weeks ago she stopped driving it for one week. She finally try to start it up but only got clicks. I bought her a new battery but it just clicks when she turns the ignition. Mechanic said it's the starter or alternator. Please, what would you recommend? I trust your experience and judgement. That jeep has great sentimental value to her. Thank you for your time.

[@aaronthomas6155]

If you don't trust the mechanic, why would you deal with him? It's either the starter or it's wiring, btw..... Alternator won't stop a car from starting after it's been sitting, or after the battery has been replaced.

[@ecschindelbeck]

At Scotty’s recommendation I bought one of those Autel scan tools, and I have to say that it is a pleasure to use and shows me a LOT of information about my cars. I got the cheaper one, so it doesn’t have bi-directional capability which means the annual updates subscription is cheaper. That is one point I don’t recall Scotty making - the more expensive the scan tool, the more expensive the updates to it can be, and can run into many hundreds of dollars annually for those over-$1000 models.

[@stuartbear922]

You are correct. I overheard my mechanic complaining about the high cost of these software updates. His scanner updates run into the thousands!

[@austinburley888]

Awesome video Scotty, I drive a Volkswagen. Naturally, it has many electronic bits. I left the headlights on with keys in the ignition, wile I was cleaning the interior. I came back to a dead battery. I Jumped the thing and the airbags were disabled. Had a message on the cluster screen. The local Toyota dealership wanted to charge me $100 bucks to reset it. I had to drive 50 miles to reset and test the bloody thing. Luckily Volkswagen did it for free. Still that tool would of saved me a headache.

[@rcbutler5311]

Scotty, my Tundra loves it when I listen to you on long road trips 😎👍

[@Roberto-vm2rl]

What are the odds of getting a bad alternator test with a BMW that's not throwing any codes? I've got a 2010 328i N52 with 200K+ miles. Runs nice but I'm getting light detonation under light and moderate acceleration at slower speeds. Live data shows "battery voltage" at 13.5 ish. I've read where maybe it's supposed to be higher. I've thrown a lot of parts at it. Thoughts?

[@Roberto-vm2rl]

For the record, the Foxwell NT510 is a pretty good BMW scanner for the money. Although you gotta put Chinese software on your computer to update the device. Wasn't thrilled about that.

[@larrystowe2761]

Your videos are great, I've been sharing them with all my friends. I've been a mechanic since I was 13. I worked at a gas station (when they were actually full service stations.) I went on to be come an ASE master tech as well as a Gold Level Honda tech. Now that I'm 67 I opened a Lawnmower repair shop. They have computers too. John deere has the most. Cub Cadet riding lawnmowers have a fuel injector where the carb used to be.

[@monterobasictech5135]

The best you can do with the knowledge is to share it, free or not it’s always better to help others

[@stephenrogers4537]

Good Thursday afternoon to you Scotty, you should be practically if not already back in Tennessee by now. However if you drive your car like you test drive some of these on your videos you may be in the Gulf of Mexico!😲🤣🤣🤣🤣🤣🧰🙌👍🍺

[@charlesstaceylindseysr4354]

Will your computer reprogram my ECU to work on my 2000 New VW 1.9 turbo diesel GL back running, the dash instruments don't come on now no crank no start, it was running before I tried to straighten the drivers door that had been open and backing up with door open got bent?

[@sew04ss]

sooooo how did the scan tool ruin your car?

[@TheUnofficialMaker]

shorted out or damaged the computer in some way

[@tracysmith9934]

It made the car say vroom vroom , instead beep beep

[@johnallex2344]

1995 chrysler new yorker it ran perfect then it sat for a month and now it will start for 2 seconds and die turn key off restart it will run 2 seconds and die also there are no dash gages no door locks you can keep it running if you rev it up 2 seconds shut off key turn key on over over what do you think ?

[@cspruitt3190]

Absolutely awesome! Thank you Scotty. Please, what is that scanner? I discovered your channel around a year ago. I have learned so much! I own 4 BMWs. 1 528 manual and 3 750's. I have owned 11 in the last 30 years. They have been nearly flawless. I'm driving distance from you, if they fix the bridge. I would enjoy you driving my 2020 750! It is incredible.

[@stringalongmike1953]

Thanks, Scotty. I always appreciate your information.

[@camarokurt]

Scotty recommended a cheap scan tool around a year ago. Creeder 3001. I bought it and it works well with the basics. Nice that it does do data streaming so you can monitor temps, etc. I think it was around $40.

[@godsbread7892]

Would it read transmission temp for a VW bug???

[@free-birdrocker8809]

"Canadians designed them," Terrance and Phillip, LOL!!! Blue Driver.🤣

[@ohioplayer-bl9em]

I have a graphing OBD2 with specific functions for Porsche on it. It works as a generic OBD2 meaning it works with all cars for the standard things which is great. The Porsche specific stuff allows you to do headlight levels, moon roof, stereo, steering angles, and a bunch of other stuff. It was only 250$ and worth every penny.

[@jgwalling]

I have the craftsman version of this one It's red instead of blue works really good.

[@Jay_Dahl]

"This Scan Tool Destroyed My Car and I'm Mad as Hell" OK Scotty, what scan tool destroyed your car, because you never told us!

[@aaronthomas6155]

He never said because a "scan tool" can't destroy your car.....

[@mikebreler9724]

If my car is cranking but not starting, and I want to confirm that its not something besides the fuel pump; will one of these analyzers work if the engine is just cranking or if just the ignition is on? Thanks for any guidance.

[@kaylabrooke2907]

Love this channel.. love the attitude and personality of this guy! Any recommendations on a specific scan tool Scotty? I'm a KZbin mechanic and pretty regularly service my own vehicles and families

[@geneevangelist9279]

If you have CEL on and then you plug in the scan tool. If you clear the code. then leave the scan tool plugged in, does leaving it plugged in prevent the CEL from coming back on?

[@pcjthe1]

Great info there Scotty. As for the "Test the battery and alternator first" def spot on. Way back in the early 60s when I was an apprentice in a university electronics lab (where we built/tested and repaired everything from in-house built to commercial equipment) the first rule of fault finding was: Test the voltage levels: If the power supply is bad then nothing else will be working properly and therefore fault-finding isn't likely to be successful!

[@themusicman1556]

I have a car stuck in no man's land and I didn't know it had this problem until I went to get it smogged, what should I do to make the mil ready?

[@Chimidway88]

Thank you for sharing your knowledge on how to use a scan tool!!! I’m really considering getting one, probably the same one you were using!

[@ag4allgood]

That's right Scotty never locks his garage at night !

[@osmanyreyes8373]

“I’m mad as hell” while he’s red as hell in his thumbnail. I’m dead lmfao

[@sevenseven442]

I love the bird🐦 sounds and cats 🐱 in Scotty’s videos!!🤣🤠☺️

[@jrcook80]

Scott, is your Matrix a 2006 0r 2007? I had a 2007, and had to give it up because my car had the same problem as you said: the Catalytic Convertor was shot and needed to be replaced plus possibly the mass air flow. This last winter, you could smell the fumes inside th e car, and it was getting so bad that I had to get rid of the car.