Vittorazi Moster plus Crankshaft bearings replacement. Paramotor engine maintenance series

[@MrDhens00]

Your maintenance video’s have been extremely valuable. Many thanks for the shared knowledge and helping to keep my machine in top shape for maximum airtime 🤘🤙

[@andreschapero3615]

You are a genius. I could never do that myself. Dreaming of electric motors replacing two stroke nightmares someday.

[@TheMatgaw]

I really like that you showed what to do when not everything goes as planned. This is usually the hardest part :D

[@edwardbrazina4045]

Absolutely Perfect 110% Stephon! Very Well Done!

[@paramotorman1]

I didn't see how the woodruff key was re-installed! Thanks for the information.

[@csmith9008]

Your maintenance videos have guided me more than once. Thank you!!

[@lawrencebeckner1097]

You should get a bearing cone heater. It's a lot easier than using a heat gun. Great video!

[@Pestifer138]

Great Video, please keep on making those!!!!

[@BrendaEM]

Perhaps next time, try freezing the bearing. Though, if you froze the crank, you could put both hot bearings on it--and then freeze the whole crank and bearings, and drop it in the hot housing halves, it might work easier. A thin film of 2-cycle oil will help protect the bearings and crank from rust from the frost.

[@paramotorhead]

Thanks Stephane 👍

[@MechInvent]

Great video. I think a press would make your life easier :).

[@adamtotherow3422]

Do you sell rod main bearings, shims and pin for those of us who repair crank shafts?

[@mamatuja]

Good job, you guys need to put the Scout logo on the gloves.👍🤔

[@videolagos]

Hey friend, where can I get this tool to remove the bearings, do you have a link?

[@1falconron]

ok now, do you guys have a teardown manual with torque specs for all bolts? Mine is ready for a complete recheck.

[@robertamuse]

Do u have a link to the pulley tool for the barrens and do u have a like to the gasket sealant

[@woolley3132]

Why not use heat to remove the bearings as you may damage the aluminium case if the bearing picks up on the case on the way out?

[@nikmakkein6622]

Как заменить шатунный коренной подшипник, прокладку и пальц коленчатого вала?

[@kikishimi9532]

I need your assistance

[@SCOUTaviation]

[e-mail]

[@kikishimi9532]

Do you have WhatsApp dear ?