"√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*"
@richardsfe2 жыл бұрын
How do I fix where I parked my car to close to a parking caution bump and it scrapped underneath? Thanks in advance!
@BETTYOCENOSAK Жыл бұрын
Great video, but for those of us who are seldom under the car, showing a quick demo of the types of bolts used to attach splash guard to car and a speeded up version of removing/adding the splash guard might be helpful. Loved the acting! "What is that noise"...lol. Thank you!
@joezuch89153 жыл бұрын
Awesome, thank you! My engine shield on my 2018 Dodge Journey got broke, but no holes or any pieces missing. Temporarily, I put duct tape on the outside, but it isn't staying well. I am not much of a mechanic, and I have tight finances, so I was thinking of taking it off and repairing it. My wife does not trust my mechanical 'expertise' (as I am no expert, lol)! She would doubt that fixing it would work and that replacement isn't necessary. Having this video, I can convince her that repairing it should be acceptable! Again, thank you! I liked and subscribed!
@brendaegan97412 жыл бұрын
Z
@jtomtl3 жыл бұрын
Happened to me twice…. Missing two screws, got it all fixed up, it’s a very annoying sounds, feels like the whole car is falling apart
@JohnDoe-fs6lz2 жыл бұрын
💀 my 19 Camry just did this
@TheCareyn272 жыл бұрын
How much of you don’t mind me asking?
@Hey-Reda2 жыл бұрын
Mines is scrapping pretty bad sound is getting worst been doing that since July 4th where can I take it for repair and is it cheap!?
@marcstoogood2 жыл бұрын
I swear it does! I thought it was the end of my car when I heard the noise. Tried zip ties for a while but I noticed when it rained, the force of the water under the car when driving caused it to break again. Finally getting it fixed the right way
@magneto79302 жыл бұрын
Yes, very annoying! It happened to me today. This is a good video but not everybody has a car lift.
@kimberlyc.79302 жыл бұрын
Very helpful. A portion of my under body cracked and now the splash shield drags. While I wont fix it myself, it makes me feel better about : 1)understanding why it needs to be fixed, and 2) going to the mechanic to discuss the issue and price. Thanks!
@scribblydoodle29245 ай бұрын
Luckily mine wasn't cracked, or I would have had to take it someplace to get it removed to do the twist tie trick. Not everyone has access to a lift. However, the bolts holding it on my Honda Fit (cheap plastic) had broken off. So the twist tie solution was genius. You saved me from taking to a shop. Can't say thank you enough for posting this clever fix. Need I say that next to duct tape, twist ties are one of the best inventions EVER!
@annaperez52493 жыл бұрын
This is great, but you did not show us how you put it back into place! How is it staying up? Thanks
@dianafranklin33812 жыл бұрын
Yeah. I need to see that part too please
@richied102 жыл бұрын
Each car is setup different.
@loisgrabowski5544 Жыл бұрын
What kind of bolts are used to hold the repaired splash shield back in place, and how many are needed? THANKS! Very helpful!
@Willywoo19753 жыл бұрын
Great video sir, on my way to work and this happened to me today. My mind is at ease now that it's fixable.
@PhilDnz2 жыл бұрын
Brilliant video. Perfectly explained, cost-efffective and fun.
@user-wi4xt5yr1w8 ай бұрын
These splash shields are such a pain and overly expensive to replace. Great helpful video on how to patch it for free. Im going to try something similar. Mine is hanging and i need screws to put it in place. I used some zip ties like you. Amazing video. Thank you.
@azerul10553 жыл бұрын
thanks man! got my license a year or two ago, and this is my first experience with a dragging splash shield. now I gotta find me some zipties
@AJR199822 жыл бұрын
That happened to me I have a bmw and I drive like a manic lol zip ties did not help me
@BUDDERARMYSKYARMY2 жыл бұрын
@@AJR19982 how did you fix it
@carterscustomrods Жыл бұрын
How vital is the skid/splash shield? Mine tore away (parking stop block) and it's hardly hanging on.
@AK.__2 жыл бұрын
Great video! Thank you . This is exactly what I wanted to do with not large crack on mine. The problem is...... i do not have a racks or any worthy equipment to lift up the car for comfortable work. Was surprised to see the fuses box under the hood and not in the trunk. I have both - battery and fuses box in the trunk under the cover, next to spare wheel.
@michaelb.2552 жыл бұрын
hahaha, the first 3 seconds of this video is pure gold, mate!!!! Well done
@rhondaross8475 Жыл бұрын
Great video!! What would someone likely charge to do this if we can’t do this ourselves?
@virgomom96163 ай бұрын
Great video and explanation! My husband has replaced the clips/screws a few times over the years and it seems like every time the dealership changes the oil, the clips somehow come up missing! My car is a 2016 and now the shield is scraped up so bad that the holes are rubbed away and I have no choice but to replace the whole shield.
@1AAuto3 ай бұрын
+@virgomom9616 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@jfrjr13 жыл бұрын
I have just changed mine. $32. Plus a heck of work.
@Jonathan-du8fs3 жыл бұрын
How did you change it
@ArielCasey2 жыл бұрын
Thank you for the quick fix! I have a jack and both plastic ties and heavy duty duct tape so I'm going to try this out on my 2018 Honda Fit 🙌
@tamaraseiley6043 Жыл бұрын
Thank you for teaching me something new (a woman). Not a pleasant sound when driving, but helpful to know what the cause was. 😂loose bolts or no bolts resulting in a currently bent underbody fabric cover. Now needing a replacement part or fixer-upper patch
@1AAuto Жыл бұрын
+@tamaraseiley6043 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
@Daflashyboi6 ай бұрын
This started happening to my 2022 ioniq 5. This helped a lot, thanks!
@warrenrwhite Жыл бұрын
Great tip. My slash guard is about like that. Now where do I find someone like you to help? Lol
@computerblue013 жыл бұрын
And this has been your Roadkill Garage zip tie moment. LOL! Good video!
@holtwebb3 жыл бұрын
I have a Toyota Avalon that’s the same year as the white one in the background of this video… Oh how I would love to see the driver side interior door handle be replaced, or maybe the power steering rebuilt, or maybe replacing the visors… you get it. ;-) Keep up the great work.
@leegately35902 жыл бұрын
Did the same fix with my wife’s 2013 Honda Civic Hybrid. The dealer didn’t attach it following a repair, so the wife drove around oblivious to what had happened. When I got to the dealer, they didn’t care. Here on our island, not much recourse or options, so I zip tied it with heavy duty ties. 5 years later, the shield failed further, so a drill and three more ties (one needed a pair to span far enough) and the shield is back in service. Repairs like this are our only choice, given the shipping costs to Kauai, Hawaii, if a replacement is even out there. When this fails, I’m installing metal straps across the frame to hold up the plastic.
@raynavarro10783 жыл бұрын
Love 1A's videos, definitely my go to place for fun easy peasy knowledge!
@kuntalbhatt33317 ай бұрын
Very nicely explained. Technically perfect narration and presentation found to be enthusiastic. Thank you so much for sharing this information. Would love to see you in more such videos.
@billross97442 жыл бұрын
Awesome video! It's exactly what I experienced from your great acting in the beginning in wondering what the noise was! lol! I love it! Your explanations and demonstrations were terrific. Thank you so much for presenting this. I will definitely like and subscribe! :)
@Partymarty0088 Жыл бұрын
Who should i have look at it/fix it? Mechanic, Oil Change place, Collision shop?
@damiann47342 ай бұрын
Good idea. My cracks are at where the crews are. Crack in middlebisnt very common
@richardswenson44633 жыл бұрын
In the case of a 2004 Chevy Cavalier, the splash shield protects the belts from small rocks. Had this issue because mine was missing and one day I noticed the belt was chewed up and after removing it I found all these small rocks imbedded in it! Replaced the belt and splash guard and have had a issue again!
@ohmylauren3 жыл бұрын
Damn, that sucks!
@MsSuzAllen2 жыл бұрын
I have an 04 Sebring convertible and the holes that the clips go through have ripped and there is just no place to zip tie it securely. Is there some fix for this. I don't have ramps or lift so kinda need to leave it on to fix. Great video.
@ehab21142 жыл бұрын
Me too, Sienna sheild came off, o ring at the edges were broken !!!
@paulciaro1582 жыл бұрын
You did great work with this well made video! Excellent helpful information that I was struggling to find before I found your channel. Thank you.
@StormLaker3 жыл бұрын
Unfortunately it didn't do my wife's car any good a couple winters ago when she hit a large chunk of ice on the road about the size of a basketball.....it pretty much destroyed the plastic shield under her Honda Civic. I took it to the honda dealer to have them remove what was left, and they estimated it would cost me about $250 to replace what was destroyed. I used a sawzall to get some of it off, they had to get the parts that I couldn't get laying on my side in the garage, haha.
@filipekonrote3 жыл бұрын
Thanks mate I can fix my own splash shield now !
@PinkFridays2 жыл бұрын
Amazing, but how am I going to lift my car off of the grown?😭😭😭
@kkovler13 жыл бұрын
It's called a nuisance cover and if cars were made so that they are not so low to ground you would not need it, else cars become mine sweepers!
@Dane-c9c8 күн бұрын
My splash shield is killing me on my Kia optima. This will help. Thx
@charlesalan5999 Жыл бұрын
For personally ….that was a good video!
@sharinasingh5180 Жыл бұрын
Hey thanks for sharing wish you guys were near me in Toronto need to get my splash sheild hooked back up
@martinf9626 Жыл бұрын
you can also weld the plastic with the right tools
@melmbautista3 жыл бұрын
Great video, quick and to the point! What can you do if the clips.. become loose? Even with new clips?
@rondenmon45002 жыл бұрын
Thanks, you just saved me a hundred dollars!
@kevinr51873 жыл бұрын
What can you do about the shields that are made out of the fiberous type material? Zip ties would rip right thru. I have a 2016 Sorento with this issue.
@gillianmurphy21112 жыл бұрын
Put metal washers where the holes are on both sides to prevent the tearing.
@TucoJames Жыл бұрын
You're a freaking genius ..Thank you
@Nunyamyname Жыл бұрын
I ran over a curb last night....nothing fell off but it's lose on one side...
@BrightVADawg9 ай бұрын
If it’s not broke got to autozone nomore than 6$ for plastic clips that go in the holes it came out of take 20seconds to put them on . If it broke off I would buy a new one and you can easily put it back on yourself just try a little bit ❤
@darinp56123 жыл бұрын
good video, disagree with most of it in regards to the splash shield being necessary, but good video
@richardswenson44633 жыл бұрын
It does more than stop water from splashing all over the engine. It also stops small rocks from destroying belts in some cars
@wesleyg43862 жыл бұрын
Very necessary it's no joke. I just went through a giant puddle with no way to go around it or back up. It flooded my engine and it would have been prevented if I had a shield. So it's definitely worth it
@brightvillamor2375 Жыл бұрын
Would you show how to put back 2021 KIA FORTE FRONT RIGHT PASSENGER SIDE UNDERBODY SPLASH SHIELD COVER
@jamesmusil5759 Жыл бұрын
We have had this issue on a 2017 honda civic. The wire ties keep coming off. I did locate some metal wire ties on amazon, but haven't tried them yet.
@sarahbellinger58392 жыл бұрын
How do you fix it yourself if you don't have the equipment to lift up the car? Would a regular jack work?
@luvflowers56062 жыл бұрын
Thanks so much for people like you!!
@rob6372 жыл бұрын
This was the video I was looking for, thank you!
@slurmsmckenzie48522 жыл бұрын
Did he used to be an air steward in a previous job by any chance?
@Taner-Aydın2 жыл бұрын
Does replacing this plastic protection cover with metal create a security risk?
@egreens85123 жыл бұрын
have splash guard issue- my guy said same . thumbs up
@1AAuto3 жыл бұрын
+egreens Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@ladym78522 жыл бұрын
"For me personally..." lol Thank you for the video!
@Hotchelle Жыл бұрын
Is there ever a back splash guard? Noticed I can see parts under my car and not sure if it fell off or if there was ever one. Can’t seem to find much online about it. Stuff just looks very exposed from what I last remember
@dracony76493 жыл бұрын
Hey man great Video i would also want to ask if The shield underneath the engine has also the roll to reduce engine noise really curious ;D
@FEspinosa782 жыл бұрын
What are the sizes on the screws? I need to buy them
@davidhelphenstine14672 жыл бұрын
EXCELLENT VIDEO! THANK YOU
@Muser2662 Жыл бұрын
How do you attach the shield to the car? I had rebar from a parking lot rip out the undercarriage.
@vicky_thind927 ай бұрын
Nice idea man ❤❤❤
@davidBarrel Жыл бұрын
Mine (new) happend to catch a lot of water underneath due to a small city flood, just one street, and it developed a big belly wich goes like 3 inches lower than the original level, it scraps everywhere but...how do I fix this? is like having more material as it streched.
@HueJanus694 ай бұрын
Bout to do this on a jack 🙏
@petersallander69133 жыл бұрын
Great idea I have to try that sometime
@dorisbrito80522 жыл бұрын
How do I change a rack and pinion on a Santa Fe Hyundai truck 03
@cdoneson6882 жыл бұрын
The part I was looking for, how to re-install it, you blew right past.
@official_myegobeauty2 жыл бұрын
Right, the most important part for me
@K-MESA Жыл бұрын
Can I just leave it off? I live in AZ not much rain or water here at all.
@CarsSupercars2 жыл бұрын
Nice fix
@evansoto4733 Жыл бұрын
Thanks buddy! I SMASHED the like button 😊
@luispalomino55143 жыл бұрын
Good Idea .....Muchas gracias! 👍
@juliemills56672 жыл бұрын
Thank you. Good information.
@trinebeanie56922 жыл бұрын
Good video right to the point ‼️
@lenovoguy007 Жыл бұрын
That's bro, very easy solution
@bradgreen86153 жыл бұрын
Great info on how to fix my splash shield. Thanks.
@1AAuto3 жыл бұрын
+Brad Green Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@abdulellahalmutairi61963 жыл бұрын
Excellent video keep going..
@elliegonzaleza Жыл бұрын
Thank you so much!!!
@1AAuto Жыл бұрын
+@elliegonzalez2300 Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
@emilydomney92203 жыл бұрын
Thank you 😃
@REVNUMANEWBERN8 ай бұрын
4:19 Since it was somewhat a clean break would of been a good time to run some epoxy down that crack since the ties can hold it together
@gustavocastrejon87632 жыл бұрын
I just got my car from my mechanic and a few days later after going to work I hear these noises and checked under my car and found this dragging . Will they charge me for this if I return it ? Or are they reliable ?
@saraachtmann77112 жыл бұрын
So what happened?.. did the mechanic cover this… same thing just happened to us.
@jameshungate211 ай бұрын
I would like to see a similar video for a 2016 Nissan Altima.
@1AAuto11 ай бұрын
+@jameshungate2 We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
@LastCommodore3 жыл бұрын
I tried flex seal tape -- came off after a couple days. So zip ties.
@justinhenderson7736 Жыл бұрын
Showing the actual process of taking it off and putting it on would’ve been nice
@katherineobrien36044 ай бұрын
2010 Audi it's hanging, the screw holes are warped so just screwing up won't work, what should I do?
@ManushSookdeo-il7lp8 ай бұрын
Hey good day . I am a fabricator and welder in trinidad and i made a shield for a toyota raize out of metal and people is concern that it will over heat can you give me a response to this please . Or even advise me . Thank you
@abendegothegreat Жыл бұрын
Thanks brother...
@TheNiuhuskies09 Жыл бұрын
Doesnt water just go right through the grill?
@jerome78383 жыл бұрын
Zip Ties
@mw9496 Жыл бұрын
How long might this last.
@abelgarcia69922 жыл бұрын
Awesome. Thanks!
@cdouglashall3 жыл бұрын
Thank you.
@RondTripp2 жыл бұрын
Thanks needed this!
@jevonpitmon8651 Жыл бұрын
Good video but it didnt show how to put the gaurd up
@soundjudgement35863 жыл бұрын
Video lacked substance. No details on how many Torc screws were required or any hardware to remove or reinstall the Splash Guard.
@blueskies6475 Жыл бұрын
That's awesome!!
@woody51093 жыл бұрын
How did you get it to stay in there?
@MrGamecatCanaveral3 жыл бұрын
Screwed it back into place.
@Lanedude08 Жыл бұрын
My splash guard on the passenger side has been tore up by the tire so I’ll have to replace mine I guess. I just need to cut off the debris.