I Built A 1100HP Corvette ZR1!

[@scraplifegarage]

Thanks to Holzkern for sponsoring today's video! Get 15% OFF at checkout using my code scraplife15 at www.holzkern.com/scraplifegarage Be proud to be unique and happy holidays!

[@SpeedyGeneralMotorsINC]

Don’t sell the C6 Zr1 it’s the best corvette ever made of all time it’s unique, cool, and fun to drive. In my opinion it should be a lifer and it’s my favorite car you have and the most fun content too

[@joshuawilliams639]

For me nothing beats a big block c3

[@bustjanzupan1074]

Aaaaaaammmmmmmeeeeeeennnnnnn, just put some Turbines onto it , 2 b perfect !!! ! !!! 🙂

[@MustyForsken]

You’re speaking the language of a good man. Zr1 - The absolute end all be all of the corvette, I love the zr1, c6 are so good looking. I don’t think there’s any chance I will ever be able to afford a zr1, but I hope to have the ability to at least own a c6 z06. It would suffice.

[@Saltlifewithsugar]

Agreeable

[@George-zq2sk]

I hope you keep this, this is truly the last of an era Vette.

[@natesmemes1794]

*Probably the best all around Corvette ever built*

[@thesearch9048]

Love the ZR1 content! Keep it around and hit up the drag strip in the spring.

[@SpeedyGeneralMotorsINC]

Keep the Zr1 more content

[@tatebeach6464]

This! At least get us some good launches and time slips

[@EZKILL-mo1md]

love all the content but Corvettes are my favorite.

[@ssoffshore5111]

Keep the ZR1 content coming! By FAR the best part of the channel IMO!

[@Bertnickram]

More ZR1 content for sure! Love this car

[@Yourmission9]

Always been a big muscle car guy but not a corvette guy. That said, your ZR1 looks and sounds amazing. Plus that color!

[@SpeedyGeneralMotorsINC]

Keep the Zr1!!

[@tufftrig1]

Hey Lee here's a good one for you, friction/grip isn't surface area related, this is relevant to your assumptions around tyre contact patch and supercharger pulley contact patch. A wider tyre doesn't give you more grip it is the compound that gives you the extra grip, the tyre is wider so it doesn't wear out being a softer compound. If you want to lessen supercharger belt slip you need to look at softer compounds rather than worrying about contact area. Great videos, keep it up 👍

[@cameron201193]

Love the Corvette! Absolutely loved watching the build to finally see it on the track! Wouldnt mind seeing a couple more videos on the track with it before you sell it and start something else! Either way I'll be right here waiting and looking forward to whatever you build next man! 😎🏁

[@AngeloL.Coleman]

Wow, building a 1100HP Corvette ZR1 is an incredible feat! The dedication and craftsmanship that went into this project are truly impressive. It must be exhilarating to experience the power and performance of such a high-performance machine. Kudos to you for pushing the boundaries and creating something extraordinary. Can't wait to see more of your automotive adventures!

[@jacksavage2612]

Also love the ZR1 but if it’s just another car for you, sell it. You guys always do awesome projects and I’m sure it would go to something special.

[@mitchellhuey5612]

Streetspeed 717 did the same thing with his 1000 hp LMR modified 2011 ZR 1 when he did a run, the belt broke and cut up his coolant hose too.

[@ssoffshore5111]

All these blower cars have the same issue, the belt.

[@mach183]

@@ssoffshore5111green belt fixes that

[@g-reg716]

That ZR1 would be the best Giveaway Car Ever! You’d make a ton and bring a lot of attention to your channel

[@BVance1972]

Your biggest fan from O H ten & I’ve been in LOVE with your ZR-1 from the get go ! but after the “ over 1100 report card “ pushed it Over the TOP 4 me! If I was you I would keep it FOREVER ( look how hard it is to find & get a good one ) but other side of coin I understand about selling & diff builds, I wish I had these kinds of problems 😂😂

[@chrisdeavers8576]

Stumbled onto your channel last week and have beinge Probably 12 hours and thats no lie 😅 I have long boring work days ! I have a 03 C5 and she is my baby can't wait to buy some parts . Keep up the great work 👍

[@grantnumrich9719]

you guys are so knowledgeable!!!! I have run into some of the problems you have corrected your self! and I love you asistant because you keep the great! humor in the shop as you guys really love what you do and work great together with laughter as well as you make everything right! thanks for you site!

[@pull_up_on_meeee]

Don’t listen to the negative comments, ZR1 will always be king and I’ll rewatch all zr1 videos all day

[@WICKDZ]

More ZR1 content for sure!

[@B_r_i_n_k]

38 seconds into the video and I yelled "I know that garage!". I bought a bunch of stuff from you guys to fix my c5 z06 a few years back. Y'all had a Blue Viper sitting out front back then. Great people. This zr1 is bitchin, dude.

[@kickintotalonenxg]

Keep the zr1! It’s my favorite build to watch updates on! There is already very little zr1 content out there so if you stop making zr1 content then there really isn’t anything left.

[@xFR34KEEx]

It would still look sick af on the trailer!

[@Yellow_Car_Bad]

Keep it!!!!! Let’s see you get the launches down and some good track numbers.

[@GeorgiaLSCrew]

It's amazing how you keep your cool during every build. Hats off

[@haroldmclean3755]

You've done a great job on your Z R 1 👍

[@slamblackek9]

That nsx is super dope in back ground I hope 🤞 that’s new project next yr

[@Lipstick_zr1]

We drag race our Zr1s and these kind of things happen. Do your research and you will enjoy some 8 second passes for sure. I helped Jeff test that intake and it came out great. Enjoy the car and race it!

[@thepowerlender]

DW from the Western Shore in AA County. You all just came up in my feed and boy what a 'meal'...hungry for more! I've got some stock C4's; 91 ZR-1 and convertible L98. I just subscribed and will be looking for more of these badass Bowtie diets! 😎

[@natesmemes1794]

*I ♡ ZR1 the way you built it, it's perfect in the Supersonic Blue Metallic, definitely 1 of my dream cars*

[@andrewless4067]

Thanks for the video. I feel your pain. You really have to love them as there is always something coming apart. Happy to look after the ZR1 in Australia if your happy to send it down under....

[@jerrykawatski9940]

I say keep the ZR1 at least long enough to enjoy the results of your work , sell it next spring when the corvette market is stronger. I really would like to see how fast it is.

[@nitish21]

can you make some aluminum piece or something to shield the line from future belt snaps?

[@simonbainbridge3507]

Loved the series, Lee - but I vote it is time to move on. I'd love to see you guys rebuild an S Class AMG, either S63 with the 6.2L M156 engine (add a supercharger!) or the S65 with the V12 twin turbo motor. Awesome content, favorite car channel on YT hands down.

[@Bconley22]

This is the first video I’ve seen from you guys. Awesome video, great information! You gained a follower.

[@biketesting]

That zr1 sounds amazing I really want a corvette there so nice and sound so damn good

[@MillerHeavyEquipmentMiami]

New build. Great content guys. Keep up the great videos.

[@RTMZ06]

It looks bad ass man, the ride height is perfect and WOW, those ride height adjustment bolt pads look like they were holding up a truck!

[@famousmidnight]

Absolutely love this spec. Gorgeous color... That Dyno shop really needs a proper fan setup.

[@InitialEngineers]

Knowing you, you’ll get another. Sell it and keep building! I agree all the fun is in the building !

[@BlownB2K]

i would say that with a cool rare car like a c6 zr1 you build it to enjoy it

[@Nickyb801]

Love the ZR1. I have one sitting at 800whp on stock blower. Fun to see the detail on the next level of build.

[@Maarrtinn]

must be fun as hell!! they pull!

[@lanegeisewite1436]

God dang Chevy America!😍😍🇺🇲🇺🇲🇺🇲💪💪💪💪 Yes plz more more ZR1!! U need to take her to the road course which is what Corvettes are built for!!

[@carlosbentley-y8f]

HELLO THERE LIKE WHAT YOUR DOING TO THESE TOYS, I HAVE A 350Z WHAT IT COST TO SWITCH ENGINE'S LIKE THAT FROM FRONT TO BACK.. I WAS THINKING A CHEVY 350?

[@kennyboyy7656]

keep it going c6 will never get old!!

[@alejandronava-k1r]

keep it. you made me want a zr1 more then any other youtuber to date.

[@williamchristopherkirtz1280]

Rims are perfect yo,I would love to see you go threw the harbor tunnel with full beans of that beast!!!

[@gsfriendlytreesmmj1165]

Great episode, I'm here to watch whatever you put out 😮. Its all been good so far 👏👏

[@johnw3638]

I've followed this one from the beginning. It's what hooked me on Scrap Life Garage. Race it, don't sell it

[@aidancaschette]

If you ever have the window problem usually if you close the door while holding the window switch up, it will start to work again. Happens all of the time with mine.

[@Eldenoras]

I would love to see it taken to the track or strip for a few videos, then maybe sell it and start another cool build. But have some fun with it first!

[@yakupcandag426]

Thank you for adding Turkish subtitles. We follow it fondly as a country

[@jamesreardon8585]

your camera is outstanding, the quality of picture is so good compared to other youtubers

[@MustyForsken]

This is my literal dream car. My favorite color code of the zr1. Keep her safe and happy. Js If you need to give it to me, I will gladly take her. Lmao the zr1 is the baddest c6 / vette ever

[@daveunbranded]

Sometimes you can gain some belt size by taking the idler off and putting it around the belt, then bolting it in with the tension

[@milkduds1971]

Love the build videos, I think a build on a '96 Impala would be fun to watch

[@tonygeorgievski4746]

Keep going with the ZR1

[@Suburbanjs]

C6 ZR1 is the best Vette made imo! Keep the content coming!! Don’t sell it!!

[@vincentcarrano6329]

Awesome series. Pack it up sell it and let’s get cracking on a new build

[@tcent3]

I’m just like you with the preference of building. When I’m done it’s like now what? But I sold a build I wish I kept so think hard about it

[@albellalbliving9164]

I love the smell of catch can smoke in the morning😅😅

[@808SSCamaro]

Not sure what much else you could do with the ZR1. Might be time to move on. Thanks Brothers for sharing! Take care!

[@Maarrtinn]

these vetts specifically are fast as hell. got to ride in one not long ago pushing 800+whp and its insane. could only imagine 1,000 plus

[@malikdigger4544]

A 1400hp Corvette pretty amazing by u Scraplife Garage luv new rear meat's on C6 ZR1.

[@Vel0zity09]

Love this channel!!! I’ve been watching this build for a while. I think I missed the part where you got the hood window glued back in. I needed to fix mine and for some reason no one where I live knows that to use to get it to stick. I’ve tried 3M windshield adhesive and it doesn’t hold up on carbon fiber. If you have any advice on that I would greatly appreciate it.

[@wickedfriggengood6992]

When drag racing you WANT squat in the back on the hit for better traction. So If anything add more hight in the rear

[@Zero1LE]

I’d keep the Zr1 that’s a lifer for me

[@cavananderson3083]

Would you guys happen to have a front fender flare which is attached kind of to the front spoiler for a 2011 Corvette C6 grand sport? I’m in need of one I broke it black plastic.

[@1g4u]

We need some Roll racing in the zr1🏁

[@cheapme1850]

The last generation of great looking Corvettes!

[@senditscott4735]

Don't let the stance guys get to ya. That's a muscle car my g. Need that little bit of RAKE!!!!

[@TheWolfMatt]

You should run your ZR1 against SS717's ZR1 out at the track. What could possibly go wrong? Love the content on this beast btw.

[@grantnumrich9719]

I would keep that great accomplishment with that ZR1! a very rare accomplishment! keep it! for sure!

[@vincentgreen5166]

I love that vette you should keep it bro!

[@geraldthompson2173]

More ZR1 content!

[@Den-ml7zg]

great show id like to see you take the Z06 back to the speed trials

[@pathfinderdiscovery9395]

Keep on making tha vids man , love um , an the zR1 is kick ass she looks brand new man

[@madmodvideogames4084]

Those markings where the bead goes on the wheel is called knurling

[@moe4772]

Hey guys! Seems like its always belt issues with these PD blowers eh? I have a Kong 2650 on my LSX 388 cu. in my (wait for it lol) C5 and alot of belt issues. Car made over 850whp @ 18 psi after which belt started slipping. Currently working on the custom belt drive over the winter...

[@jacksavage2612]

Man they look great on the car 🔥

[@markim5087]

When he looked over the fender at the blower I was waiting for the rusty idler to blow up, lol..

[@stewsonic03svt]

I'd like to see more racing content love the zr1

[@krasnaindiancuisine8338]

Take it to Florida for more ZR1 content

[@S2NAZ]

Beautiful Vette 👊🏻

[@lllllllllloooo-g9y]

You have the parts so step it up and put some coil overs on it all the way around, it will tighten up the suspension handle and ride better!

[@chopdogrulz1337]

More ZR1 content please!!!😎

[@bladesofglorylawnmaintenan6354]

Sell it and finish the Demon!! Stay blessed

[@bartender_billy6229]

TIL that scrap life is located in Maryland. That’s dope! I live in Maryland!

[@bartender_billy6229]

Update, I just learned that I live 45 minutes from y’all 😂

[@bobx5400]

Love to see you guys break into a new market, Ferrari, Lambo, McLaren maybe??

[@bonecrrusherSS]

What idler pulley is on the drivers side?

[@InfinitiRiot]

The intake you put on, can I get a link for it/ anywhere I could find it

[@redtesta]

if any car the zr1 is a lifer. They will only go up in value , rare and desired. If anything its going to hold its value. Its a special car.

[@davidcorder95]

Heck yeah brother yes love mopar and ford I’ll like those Corvettes love to see those demon videos

[@Rennsport-Media]

More Porsche content 🙏🏼

[@Silencer84]

Follow your heart, if it's not a lifer, focus on your other projects or get something new, do what feels good and we'll follow you in any direction you choose!

[@LaKuan]

Keep the ZR1 🔥🔥 very hard for any car to be on that same league.

[@Whatta-Man]

More ZR1 and C6 Corvette content!!

[@thekingscene]

C6 ZR1 is the king of the Corvettes. If you guys dont want it anymore there's someone out there that does

[@russelbarns1737]

hey Lee...nice video mate, great work..sell it, put the money into another build

[@gd1996]

I'm with you, the build is the best part.... I lose interest once they are done. But I'm also to the point that I don't want to spend all my free time building more cars and everything is just so expensive anymore lol

[@slamblackek9]

Store it up this car is really nice please keep this car it’s worth money

[@mach183]

11:40 I had no idea you could do that to a green belt ?!!!!!

[@Robloxgrl1]

Cecil county raceway is my home track! Better luck next time guys