Engine Coolant Change - Peugeot 206

[@sharonmcgovern1918]

Thanks!

[@screwsnutsandbolts]

Thank you very much, I really appreciate it !

[@sharonmcgovern1918]

It's only small but thank you. It was a really informative video. I've been given this car and I want to be able to take care of it and understand the workings 😊

[@screwsnutsandbolts]

You're very welcome, thanks again 😊

[@josedelaluzavalosaleman8122]

@@sharonmcgovern1918

[@markwilliams2830]

Great step by instructions easy to follow.Thanks for taking the time to make the vid.

[@screwsnutsandbolts]

You're welcome, thanks again :)

[@Pitaoj]

Thanks so much for a VERY good instructional video on replacing the coolant!

[@screwsnutsandbolts]

You're very welcome, thanks for watching !

[@larrystafford5887]

Very good video thanks for taking the time to do it.

[@screwsnutsandbolts]

You're welcome !

[@RC-cm1my]

Great video. Thanks for taking the time to make it.

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@borja6083]

Congratulations for the video, detailed explanations as per Haynes, Good job!. (I think it is also valid for 205 )

[@screwsnutsandbolts]

Thanks for watching !

[@TAM-bw3bz]

Thank you for your great work!

[@screwsnutsandbolts]

Thanks for watching !

[@sendaker4541]

Thank you for your lovely asmr videos. I enjoy and learn a lot whith them.

[@screwsnutsandbolts]

Glad you like them! :)

[@hectorherbert6585]

very clear vid..I wanted to say that since access is made easy changing to a new thermostat (89°c) is a good idea to complete the full task..and watch out for that engine block torx bleed screw..she's 'fragile'..!!

[@screwsnutsandbolts]

Thanks for watching !

[@chrisgill7123]

Great video.Good camera angle,good explanation step by step❤

[@vegitoisbaas]

I have noticed it is fragile🥲 still got it to work

[@khalilbenalgia4279]

very instructable , very useful, thank you for sharing

[@screwsnutsandbolts]

You are welcome!

[@screwsnutsandbolts]

Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍 Screwsnutsandbolts

[@tamakitamaki295]

Que tipo de líquido refrigerante utilizas para el Peugeot 206 ?

[@tompok76tompok76]

Thank you a lot, Tom

[@screwsnutsandbolts]

You are very welcome

[@mikelfernandez1980]

Great Video. Thanks

[@screwsnutsandbolts]

You are welcome!

[@uroskostic8570]

Why is everything on French cars more complicated than on other cars?

[@screwsnutsandbolts]

I don't know, I really don't lol. Have you seen a video on changing the air filter on a Peugeot 308 ?......now there's a complicated job !

[@uroskostic8570]

@@screwsnutsandbolts my sister owned 308 and it burned oil like it was two stroke :))) hahahah ...I own Lancia Kappa 2.0 5.20 ...even with massive 5 cylinder engine, everything is on hands reach.

[@yakupsakar6184]

good video, waiting for new series Peugeot 206

[@amanda1100]

Thanks dude my Peugeot is 13 years old and now its starting to get some small mistakes so ur vids help me alot how many vids u did for the Peugeot 1.1?

[@screwsnutsandbolts]

You're welcome. I think I did about 40 videos on the Peugeot 206

[@JOAOPENICHE]

Thanks

[@screwsnutsandbolts]

You're welcome !

[@goodwillhunting9572]

Weird that my mechanik lied me, i gave car to change coolant liquid, he did but on papers he gave its written charge is only for 1litre liquid 😅

[@Станислав-ы8я5ч]

Лучший. Спасибо)

[@screwsnutsandbolts]

You are welcome, thanks for watching !

[@andresyopasa2337]

Hola, cómo se llama la espuma que tiene de protección la manguera desfogue 8:22

[@screwsnutsandbolts]

It's called pipe foam insulation: www.google.com/search?q=pipe+foam+insulation&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjCj-2n9r33AhVPasAKHWyKCM8Q_AUoAXoECAEQAw&cshid=1651395185137399&biw=1536&bih=722&dpr=1.25

[@andresyopasa2337]

@@screwsnutsandbolts Thank you

[@screwsnutsandbolts]

You are welcome :)

[@atila8623]

Thanks a lot it's helpful

[@screwsnutsandbolts]

You are welcome

[@studio1998clv]

how do i know if i have 1.4 sohc or 1.4 dohc?

[@gasi9613]

👍👍👏👏 Many thank’s!

[@screwsnutsandbolts]

Thanks for watching ! 👍

[@wowftw120]

Why do I have to remove the air filter? Can't you just bleed it from the bottom?

[@FIXnMIX.]

He did that to unscrew the second bleed nut on the left side of the cylinder

[@ErnestoBorreroGomez]

Buenos días. Me puedes indicar cual es la referencia del sensor de dirección hidráulica para un Peugeot 204 1.4 gasolina?. Espero su respuesta. Gracias.

[@screwsnutsandbolts]

Peugeot 204 ?. What year ?

[@ErnestoBorreroGomez]

@@screwsnutsandbolts 2004

[@sharonmcgovern1918]

Thank you 😊

[@screwsnutsandbolts]

You're welcome 😊

[@efthimios121]

G11 or G12 for 1.4 8v KFW motor?

[@attouiabdou2651]

Merci 😘

[@screwsnutsandbolts]

You're welcome !

[@braizat]

Me gustaría ver el video pero al 308 Gracias

[@ЕвгенийСеменовичСлепаков]

this is not correct since the antifreeze was not completely replaced! How much antifreeze did you drain? 2-3 liters?

[@TheBestDarkSide]

Thank you!

[@screwsnutsandbolts]

You're welcome!

[@martymartin2894]

Mine is 307 and was easier to get to the bleed screw on the thermostat than on this one.

[@yyvv1488]

Y EL CHAMPÚ PARA LOS VIDRIOS DONDE SE ECHA?

[@screwsnutsandbolts]

This video will help: kzbin.info/www/bejne/jZ3Seouej6tkhs0

[@FAB1150]

What type of coolant do you use? I really can't find the info online. Thanks!

[@screwsnutsandbolts]

The manual recommends BASF Glysantin G33-23F or Gurit Essex Revkogel 2000 or equivalent.

[@giveaf9370]

The coolant in my expansion tank is like frothy. How do I flush this from the cooling system please?

[@screwsnutsandbolts]

Did it become frothy after you changed it or was it already frothy ?. If so it could be a sign of an underlying issue. Check this link: askinglot.com/what-does-it-mean-when-your-coolant-is-foamy

[@thanoskoulouris]

At the start of the video the liquid is green, but at the end you put orange. So i guess it takes both and color doesn't matter, right? (I have a Peugeot 206 1.1 gasoline model 2005)

[@screwsnutsandbolts]

Hi, it's not about the colour, it's about the correct type which is in the video description, thanks.

[@mohammadullahhasani1443]

what kind of cooland fluide are you using(used)?

[@screwsnutsandbolts]

It's in the video description, thanks

[@fouzaialaa7962]

thank you for this video ive been looking for the bleed valve for a few days i have a 206 with 1.1 engine ...my problem is i feel like the fan turns on too late .... i read online that the medium intensity fan turns on at 85 to 90 .... mine turns on at half intensity at 100 degrees and at full blast at 110 degrees .... do you have any idea why it does this ??

[@screwsnutsandbolts]

It could be a faulty thermostat, coolant temperature sensor or something else

[@ethanmccrory2088]

Mine is exactly the same. Coolant looks dirty so gonna change it and see if that helps

[@tamakitamaki295]

Cambiar sensor de temperatura

[@danalvesDR]

Do you recommend G11 or G12 coolant for a petrol 1.1 206?

[@screwsnutsandbolts]

Either one is fine

[@AngelaBozhinovska]

Is this same on 206+, 2011 ?

[@screwsnutsandbolts]

I'm not sure about the newer model, sorry.

[@e.s.1321]

Hi, how can I recognize if the engine is 1.1 or 1.4 ? Tks

[@skatehero7703]

hello my car is 2002 model 1.4 petrol. What type of cooler should I use?

[@screwsnutsandbolts]

The manual recommends BASF Glysantin G33-23F or Gurit Essex Revkogel 2000 or suitable equivalent

[@skatehero7703]

@@screwsnutsandbolts Are there any new products with these approvals?

[@balazskurtos4972]

And the 1.9d?

[@screwsnutsandbolts]

I'm not sure if the 1.9D is exactly the same as this. It's not covered in the manual I have.

[@abdelmoutalebbenbattouche4128]

for the 1.9d engine you need 8.2 litres

[@drumchapelboy]

think I might give it a miss and just keep topping up too much work. car makers don't make it easy.

[@christma4857]

my fan isnt turning on and off after following all the steps at the end, does this matter that much?

[@screwsnutsandbolts]

Maybe the engine isn't getting hot enough ?

[@christma4857]

@@screwsnutsandbolts no idea, maybe not because it was a cold day, I did rev it for quite a while

[@c_ibrahim_yildirim_c6737]

👍

[@screwsnutsandbolts]

Thanks !

[@SmAEsch0R]

thanks

[@screwsnutsandbolts]

You're welcome!

[@Satu368]

G13 Coolant Liquid....

[@Kamal_Esedullayev]

👍🫡

[@screwsnutsandbolts]

Thanks !