Ford Edge Rear brakes replacement pads and rotors maintenance mode 2015-2018

Ford Ecoboost Edge
• Ford Ecoboost Edge
Brake compressor tool • How the brake compress...
Brake compressor kit sold here amzn.to/48RLL6K
11mm Hex socket (front Brakes) amzn.to/4a2B0zA
7mm Hex socket (rear brakes) amzn.to/3Vc14UK
Hex socket set 2mm-14mm amzn.to/3VdPEzM
I am an amazon affiliate, so purchasing through the links I provide may support the channel with a small commission.

[@babygreen4176]

I'm glad you showed everthing needed and how to do it. These new brakes are unnecessarily difficult because of new engineering.

[@marklangston9506]

Hey man that was the easiest set of brakes I have ever dealt with , great video..thanks

[@michaelallen5505]

Great video, helped a lot. One minor detail...turn the switch on, then do the pedal and parking brake button, then it's "off and on" instead of "on and off".

[@dannyjohnsonsgarage]

Yeah. I said that backwards

[@SnaggleToothTactical]

Great video. Short and to the point. Excellent job...

[@richarddiaz8248]

Thank you for your knowledge and expertise

[@Tony-tk4ht]

that was dope, these newer electronic park brake can be a struggle if you dont know what you doing

[@ThomasNappo]

Looks relatively easily...😊

[@tommybaez5260]

Thank you👍🏽

[@HAL-dm1eh]

This is a good looking lil crossover

[@martinsmythe3414]

have a 2020 Nautilus which takes the same pads and rotors can I assume the replacement is the same? Also do you have a recomendation on a brand of pads and rotors ? thanks

[@dannyjohnsonsgarage]

I imagine it’s the same process. As long as you get the top quality at the parts store, most work just fine. These were the duralast gold from autozone.

[@peterdrobecki3941]

Any updates on the Tundra.... and did you sell off the Denali....Thanks

[@dannyjohnsonsgarage]

Love the tundra. Looking at sequoias.

[@REDSVT226]

Want to add that when you put the new pads in, the notches in the caliper piston are supposed to line up with the raised dots on the pad. I’ve heard if that’s not lined up the pad will wear unevenly.

[@toddevans5528]

Why do some pistons need to twist to collapse and some dont?

[@dannyjohnsonsgarage]

I’m not sure why they have the 2 different styles. It’s usually on rear brakes but I’ve seen the same model of car have one and the other

[@azazil061]

I think its to keep you from over opening them and causing damage