Ford Edge Front Brakes replacement Brake pads and rotors 2015-2018

Ford Ecoboost Edge
• Ford Ecoboost Edge
Brake compressor tool • How the brake compress...
Brake compressor kit sold here amzn.to/48RLL6K
11mm Hex socket (front Brakes) amzn.to/4a2B0zA
7mm Hex socket (rear brakes) amzn.to/3Vc14UK
Hex socket set 2mm-14mm amzn.to/3VdPEzM
I am an amazon affiliate, so purchasing through the links I provide may support the channel with a small commission.

[@liamknuji]

This was absolutely amazing. You were spot on with everything. I used all of your advice and followed along with your video and I was able to do this by myself. I cannot thank you enough!

[@kevintucker6000]

Thank for this great video. I have to change out pads and rotors on my mom's Edge.

[@randybaklini7408]

BIG THANKS for the comprehensive video~!

[@ThomasNappo]

Well done

[@anontseeker]

great vid ty

[@anontseeker]

Your filming was great, very clear and your commentary was right to the point. You had exact sizes of all tools and torque settings. One stop shop for the front breaks. Do you plan on making a vid on the rear breaks? Or the maintenance mode at least?

[@dkhallal]

Are there no worries about the ABS system being affected by just pushing the caliper pistons back in?

[@dannyjohnsonsgarage]

It shouldn’t be a problem with the master cylinder cap removed as shown. I would also watch this for the rear brakes where service mode is required, but only for the electric parking brake kzbin.info/www/bejne/pH3VlIiCeN-tndksi=9WpZcpG0nAkLaVlt

[@jaleelwhite3017]

NEVER USE LOCK TIGHT, someone has to unloosen that after you

[@dannyjohnsonsgarage]

Don’t use RED lock tite. In this video I used BLUE and you can already see it was there from the factory on the caliper mounting bolts. If you don’t the bolts vibrate loose