I do love this controller even with the issues. The other issue I have is every time I connect the controller to my pc it says the mappings are not synced and I have to resync it every time. All of the issues that I’ve dealt with or heard about are things that can be addressed with firmware and software. If you are not someone that wants to spend the time to figure out how to get everything to work, then it’s not for you. However if you are willing to spend a little time, this controller is amazing!
@SjDaSauceGod7 ай бұрын
I agree! it was finicky, but i took the time and figured it out. I have hundreds of hours of use and its been pretty solid!
@G-Ware3 ай бұрын
Yo, I never heard an enjoyable voice like this!🥰✅
@SjDaSauceGod3 ай бұрын
Thank you!
@skrillex23735 ай бұрын
thank you so much helped a lot i was so confused when i got the controller and my operator was stuck ADS then found your video and was oh ok makes sense so thank you so much for the help much appreciated
@SjDaSauceGod5 ай бұрын
happy this video could help you! Good Luck!
@zerograv1ty117 ай бұрын
Mannnnn you too, so it does need to be open. I hopped in a ride and it didn't drive off lol smh. I just thought it was just me which was the reason I almost returned it.
@SjDaSauceGod7 ай бұрын
yes it was super frustration trying to figure this out. But when i realized i wasn't having the issue with iCue open, then i made it a priority before i ever pick up the controller
@scottjhicks7 ай бұрын
I have the same issue without the app open. I also have similar issues if I try and play with it wirelessly sometimes.
@Pickl3-Zim6 ай бұрын
I have mine set to open on system start up, I usually never leave my pc running after I'm done gaming so when I do turn it on to play, it automatically opens up upon turning on my pc
@SjDaSauceGod6 ай бұрын
@@Pickl3-Zim Honestly, i should probably do the same. I forget more often than i would like
@MT-yy9up4 ай бұрын
Very helpful video. Watching and support from London, keep it up
@SjDaSauceGod4 ай бұрын
thank you, appreciate it!
@JustPlaqohh6 ай бұрын
thanks for the video man, it was really helpful :) I got the envision pro yesterday and I still struggle to get used to the P2 and P3 paddles.. did you have any issues with them? do you use four fingers or two fingers on the paddles? I'll see you on twitch!
@SjDaSauceGod6 ай бұрын
I’m glad this video was helpful! I don’t have issues now with my paddles, i use my (two) middle fingers to press all 4 of them while gaming. I do remember it taking me some time to get used to when i got my first scuf though. But after few years with scuf controllers, ive gotten used to it. And looking forward to seeing you over on Twitch!
@zerograv1ty117 ай бұрын
Man your video was awesome, thank you
@SjDaSauceGod7 ай бұрын
i appreciate that! thank you!
@STKReacts4 ай бұрын
Mic sounds crisp! What are your filters?
@SjDaSauceGod4 ай бұрын
thank you! I am using a goXLR and have calibrating it mostly based off of the settings in this video: kzbin.info/www/bejne/rn2TZ614Zb6ogsksi=JnKMsQ01i2wAXJj2
@xxullxTrixx3 ай бұрын
How does your software look like that. Also awsome video
@SjDaSauceGod3 ай бұрын
Thank you for those kind words! And I believe this is the default settings for iCUE!
@mad-ib9bc7 ай бұрын
Envision's stick feels similar to dualsense? I mean response curve because I tried some controllers like powera fusion or gamesir g7 and cant get that accuracy like I got on dualsense
@SjDaSauceGod6 ай бұрын
To me, it was a seemless transition from scuf reflex sticks to the envision sticks. Prior to the reflex, i was using dual sense and that transition was smooth as well. I know its not a good answer but its the best comparison i can make. I hope that helps!
@MW-zi9biАй бұрын
Can you do an updated video with the new iCue? My iCue layout looks nothing like this
@SjDaSauceGodАй бұрын
i may do a further review for 1 year review when we get there
@AmishGeneral4 ай бұрын
why not just turn dead zones all the way down in icue and adjust in game deadzonez so your not conflicting to separate sets of the same setting?
@SjDaSauceGod3 ай бұрын
that is a fair question! I certainly could, just not something I necessarily considered when standing up the controller.
@eclark99655 ай бұрын
There’s no software issues. No idea why you would overclock a controller.
@SjDaSauceGod4 ай бұрын
I have overclocked previous controllers to reduce the input delay. I have no issues with delays on this controller.
@eclark99654 ай бұрын
@@SjDaSauceGod input delay is a hallmark of bad aftermarket controllers.
@Youngordo2 ай бұрын
Great video, question. I just got my Scuf FPS today I play on pc, but I wasn’t aware that I had to get the EMR to remap back paddles. Is iCue only for the envision? Or does it work to remap paddles on all scuf products? Thank you
@SjDaSauceGod16 күн бұрын
Sorry for delay in replying, I do believe icue is the only way to remap the buttons.
@Devest85 ай бұрын
Did uou have problems with the Kontrolfreaks? Also is ICue better than DS4?
@SjDaSauceGod5 ай бұрын
No problems with Kontrolfreaks. And iCue has a lot more customization capability. Its a necessary app for the controller
@theewaynem64506 ай бұрын
Clean video
@SjDaSauceGod6 ай бұрын
Appreciate it my guy!
@SILVERBACK-ij6po6 ай бұрын
Solid video!
@SjDaSauceGod6 ай бұрын
Thank you!
@KhyrisEidan7 ай бұрын
What's better than the Scuf Envision Pro with the PS layout? That's really good and budget friendly? (That don't have the problems?)
@SjDaSauceGod7 ай бұрын
That is tough to answer. I haven't had much experience with other brands outside of scuf. I've heard good things about battle beaver but can't personally vouch
@The_Crazy_Romanian7 ай бұрын
bro the controller is nice but it has a lot of issues....icue is unstable and sometimes it shuts down and the controller stop working...i play with the hardware settings but i am limited on maping the buttons....i already ask for a refound and I buld my one controller with extremrate
@SjDaSauceGod7 ай бұрын
I'm sorry to hear that, I haven't had many issues with the icue app at all really. I can see why that would be frustrating because without the icue app, the controller itself can be essentially a paper weight.
@Raulsbullet16 ай бұрын
Are those control freaks the Xbox or PlayStation ones? I’ve been thinking ab getting it for my controller but im wondering if they’ll grub on to the analog stick on the envision controller
@SjDaSauceGod6 ай бұрын
I am using the PS kontrol freaks. I customized the sticks to be concave (This is the important as the CF wont grab convex sticks). I have had this kontrol freak on since Day 1 and it has never fallen off. Hope that helps!
@CamHarap7 ай бұрын
Have you tried messing with binding the independent dive to a button? I'm been trying to map it to my left side bumper but I can't figure out how to get it to work.
@SjDaSauceGod7 ай бұрын
I have not tried it! i watched IceManIsaac's video describing how he uses the keybinds. I had already developed my system from previous scuf controllers.
@rodrigopainaraujo44097 ай бұрын
Nice video thank you!! Do you know if it is possible connect Envision pro on DS4windows?
@SjDaSauceGod7 ай бұрын
thank you for those kind words! And to be honest, I am not sure. My knee jerk reaction is no but I have not tried.
@R-Blizzy3 ай бұрын
Are you getting any issues where the back paddles after a couple of games they start to lag and are delayed. Its driving me nutts. Im always having to go back to my ps5 controller because of it
@SjDaSauceGod3 ай бұрын
I am not having that issue with my controller. I can definitely see why you would go back to your tried and true controller when you experience that issue. I would suggest maybe reaching out to Scuf?
@YourboyMusti5 ай бұрын
Buying a $200+ controller and not setting a button to auto dropshot (cntrl key) is insane wasted potential
@SjDaSauceGod5 ай бұрын
I have been using tactical button layout (right thumbstick is drop shot) since 2009. I think I am too far along to change that. I do recognize it may have its benefits, but might be diminishing returns at this point in my COD "career."
@boardnamona7 ай бұрын
Also when i map the sax buttons off completely they dont map and it stays as a mapped button and the blanks are still protruding like a button.. i would avoid at all costs
@danlav313g4 ай бұрын
I made this mistake and you haven’t fully pushed the blank down. When I put the blanks on the first time I didn’t push them down hard through fear of it seeming too hard but you need to push them down with a bit of force and they go flat
@Devest85 ай бұрын
Just got mine and my right hand gets numb while playing
@SjDaSauceGod5 ай бұрын
that doesn't sound great. I remember being frustrated during my first week of using this controller but eventually got used to and now I love it. I would say to give it some time, but if you have same issue in a week or two, then it might be a problem.
@itzsabbage383016 күн бұрын
bro my bad back buttons staighht up dont work i use icue for all my rgb but for the controller its hot ass
@SjDaSauceGod16 күн бұрын
send that controller back to scuf! This controller has served me well, but I would be fed up if paddles didnt work
@itzsabbage383016 күн бұрын
@@SjDaSauceGod they work .. sometimes and sometimes they don’t idk i like it when it works but it doesn’t all the time
@kaykay-rw5xi7 ай бұрын
My kontrolfreeks doesn’t hold on to the thumb stick tight enough, are you having the same issue?
@SjDaSauceGod7 ай бұрын
I am not having this issue with mine. But I will say that I ordered my controller with concave thumbsticks rather than convex thumbsticks. I have had issues with the convex thumbsticks with my Kontrolfreak not fitting properly.
@Ocinfv3 ай бұрын
I’m having an issue with my envision pro where in cod it feels like I have a constant high dead zone. In the software I use 0 0 and same in game. No matter what I change my dead one to it still feels like the dead one is like 20. Does anyone know how to fix this?
@SjDaSauceGod3 ай бұрын
oh man that sounds brutal, sounds like you've done all the steps I would do. Does that issue exist while playing other games?
@Ocinfv3 ай бұрын
@@SjDaSauceGod Only other tested in Fortnite and it seamed fine. I even went through the steam controller settings and turned that dead zone down still nothing. Previously I used a stock ps5 controller and the thumb sticks dead zone feels much looser. The only fix I found so far is raising my sensitivity up by 2.
@SjDaSauceGod3 ай бұрын
@@Ocinfv I'm glad you found some sort of fix. But having a sensitivity of 2 is probably much harder to play with. Could be an issue with COD if you weren't having it with Fortnite.
@prsupaman16 ай бұрын
Still havent found how he did the auto run???
@SjDaSauceGod6 ай бұрын
how who did the auto run? IceManIsaac?
@cyberbogart6 ай бұрын
Is there a way to open the map by assigning a button?
@SjDaSauceGod6 ай бұрын
the button immediately to the top right of the D-pad is defaulted to opening the tac map currently (similar to how the touchpad on PS controllers opens the tac map).
@Mr7633924 ай бұрын
where can you find the app
@SjDaSauceGod4 ай бұрын
the icue app can be found here: www.corsair.com/us/en/s/icue
@sparkywalton6 ай бұрын
Anyone using this for RDR2? Received the controller yday and would Love some recommended setups
@SjDaSauceGod6 ай бұрын
I personally do not play RDR2, but would be interested to hear if anyone else had tips!
@willgriffin32864 ай бұрын
Teepe has his overclocked
@SjDaSauceGod4 ай бұрын
does he? I'm going to have to research a bit more! My understanding was this controller was unable to be overclocked, but I very well could be wrong!
@willgriffin32864 ай бұрын
@@SjDaSauceGod I did it it’s not too hard
@SjDaSauceGod4 ай бұрын
@@willgriffin3286 i'll have to try it out myself!
@alexisfournier96185 ай бұрын
m’y envision is overcloocke is possible
@SjDaSauceGod5 ай бұрын
not sure if you are asking, but no it is not a controller you can overclock unfortunately
@boardnamona7 ай бұрын
Terrible Terrible controller have to set the trigger deadzones to 20% to not be firing automatically which is outrageous for a fps game
@SjDaSauceGod7 ай бұрын
20% is actually insane, mine was finicky at 2-3%. Finally i increased it to 10% and then slowly reduced 1% over time till i got to 4%. I also found that linear helps to prevent auto fire. I was getting mad frustrated till i fine tuned it
@scottjhicks7 ай бұрын
At 20% I would reach out to get your controller warrantied out. That is too much and sounds like a manufacturing issue or parts defect.
@ghostx141xgaming516 күн бұрын
@@SjDaSauceGodi put my in game sense down and in app up, or played with it, so basically it’s just the deadzone stuff balance those and it’s perfect
@SjDaSauceGod16 күн бұрын
@@ghostx141xgaming5 it takes some adjustments, but glad you found the sweet spot!
@ghostx141xgaming516 күн бұрын
@@SjDaSauceGod which selection did you put linear? Do you have joystick randomly spinning you? Opened it today and happened to me in call of duty besides the random screen openings
@dominiquevanderkolk94305 ай бұрын
What footpadel do you have
@SjDaSauceGod5 ай бұрын
I am using the Elgato Foot Pedal. I did make a video on all my streaming gear, you can find it here: kzbin.info/www/bejne/mKDLl4OLnt6BqM0
@dominiquevanderkolk94305 ай бұрын
@@SjDaSauceGod thx bro
@nickdaddyd25787 ай бұрын
my mappings save but they dont work while trying to play cod. any ideas?
@nickdaddyd25787 ай бұрын
well they work wired but not wireless
@rob1bassbone7 ай бұрын
@@nickdaddyd2578 same thing happened to me. I returned the controller a few days ago. TOo much of a headache for the price
@SjDaSauceGod7 ай бұрын
@@nickdaddyd2578 I am not sure there. I use my controller exclusively wired and have not had that issue while its plugged in. Are you having same issue when you are wired in?
@nickdaddyd25787 ай бұрын
@@SjDaSauceGod I’m not even 24 hours in with this controller and I’m over it. Has more issues then it’s worth. It’s only works on CoD while hard wired and there’s been 2x today where mid game the whole controller will stop working, when it starts working again only the basic functions work but no paddles/key binds.
@SjDaSauceGod7 ай бұрын
@@nickdaddyd2578 is the iCue app running on your PC? I have had several occasions where my triggers and several buttons wont work and i'm forced to open the iCue app mid game to resolve the issue.
@JaimeVzq7 ай бұрын
how did u get a custom faceplate?
@SjDaSauceGod7 ай бұрын
if you select "build your own" on the website, you can choose how to customize the controller! I think this link should work scufgaming.com/envision-builder?source=collection
@JaimeVzq7 ай бұрын
@@SjDaSauceGod Thanks, I alreafy have an envision pro, I was hoping to just get the faceplates but I guess they aren’t selling those by themselves :(
@breloominonion7 ай бұрын
To deaden discord I would still need to click into discord before I press the controller button right?
@SjDaSauceGod7 ай бұрын
That was my fear! But actually no! I have discord open on a second monitor, and i don’t even have to be clicked into it for it to deafen. I set up an additional keybind which does not require you to click into it. (I believe the default key bind in discord does require you to be clicked in for it to register). I had a trial and error process before I got it figured out and it works like a charm!
@SILVERBACK-ij6po6 ай бұрын
@@SjDaSauceGod Im having the same issue. While in COD the discord deafen isnt working. What do I need to do to fix it?
@SjDaSauceGod6 ай бұрын
@@SILVERBACK-ij6po instead of using the default keybind in discord and trying to link to Scuf, i set up a new one. That new key bind can be used whether discord is tabbed or not. I then input that keybind into the icue software for the controller.
@SILVERBACK-ij6po6 ай бұрын
@SjDaSauceGod that's what I ended up doing. Loving the controller so far!
@MikeCheckGames3 ай бұрын
I personally don’t use the iCue software. I chose to manually map because that software is AWFUL. Though it didn’t happen much, it was crash and the controller would disconnect. More often than not I’d spend 30 minutes mapping the profile only to have to launch and relaunch the software to actually make my changes apply. If anyone has a fix though, LMK!
@SjDaSauceGod3 ай бұрын
The app used to crash much more a few months ago. I think it has stabilized recently. In fact, I cannot definitively remember the last time the app crashed on me. It is not the greatest app, but it loads better than it initially was.
@mambaout24377 ай бұрын
İcue fixed?
@SjDaSauceGod7 ай бұрын
I have not had an issue with Icue recently. What problem were you having?
@mambaout24377 ай бұрын
@@SjDaSauceGod hi mate thanks for answer,There are complaints that the buttons do not work while playing games.Because of Icue app
@SjDaSauceGod7 ай бұрын
@@mambaout2437 I will have issues when my iCue app is NOT open. When my icue app is open, the controller works great!
@mambaout24377 ай бұрын
@@SjDaSauceGod Do I need to keep it open in the background while playing games?I mean Icue?runnıng background?
@SjDaSauceGod7 ай бұрын
@@mambaout2437 yep! i keep it running in background (on another monitor)
@EverythingTrill16 ай бұрын
bro i need help with my envision i added you on discord