Clear Liquid Sculpey for FB

You’ll have a blast exploring these fun projects! Start by checking your oven temp with an oven thermometer. I got mine at Walmart. They’re super affordable; and every clayer should have one. I preheat my oven to 325F for max clarity. (Check your piece every 5 minutes; so it doesn’t scorch.) The Sculpey molds shown are bakeable; but not all molds are. Be sure to begin by stirring your liquid clay until it’s a uniform consistency. You can stir it in the bottle or in a cup.
Cut pieces of Sculpey Souffle or Sculpey Premo to size and place them into the jewelry mold. Add your inclusions. Then cover in a thin layer of Sculpey Liquid Clear. For light colors, tent with foil. Place in preheated oven and check in 5 minutes.
When adding alcohol ink, start with a tiny drop, then increase ink to darken. For maximum clarity, bake the colored layer first, then add CLS and inclusions and bake again for 5 minutes or until clear.
Brush mica or gliiter into the molds before pouring the Sculpey
Liquid Clear for a delicate shimmer.
Trim pieces with cuticle scissors if needed.
For window clings, I use a piece of glass from an old picture frame. Place your image underneath the glass. Tape it down so it doesn’t slide around. Outline the image with Liquid Sculpey in any color you like. Then fill in with pre-mixed liquid clay colors or mix any color you can think of.
Most important of all, don’t forget to enjoy every minute. This is your fun time.
Get all the Sculpey supplies at www.Sculpey.com
Visit our website to see more of our products and project for your next clay projects:
www.sculpey.com/
#sculpey #sculpeyproducts #quicktip #claycrafttutorial

[@lausdeandl]

Thank you Pandora and Sculpey. Great video.

[@OrignialLostintheFifthcorner]

Does this lady have her own channel? I would totally subscribe! I was laughing out loud!

[@GiamarieSaponaro]

yes she does, Teresa Pandora Salgado she is awesome!!

[@BornAgainFarmGirl]

That was an excellent video Pandora , Sculpey chose the right creator to stimulate sales , that's for sure !

[@Andersdotter19]

I've just started working with Sculpey clay and I've had a little breakage. Is this liquid any stronger? Seems like it could be. Thanks!

[@TeresaPandoraSalgado]

Linda Andersson yes, it’s strong and flexible.

[@Andersdotter19]

@@TeresaPandoraSalgado Thank you!

[@sandrastorey3586]

so beautiful

[@citrusbutter7718]

I'm not sure that i like how they have it white at first. That's hard to mix pigments in when you cant really see how it will look until after you bake it, and the dumping it and stirring, is it only a1time ster or do we have to do that every time we're on another project? And i think someone said that it has a warning about not breathing in the fumes on the bottle?

[@iLitAfuseiCantStop]

Is this the same thing as “TLS?” Translucent Liquid Sculpey? 🤔

[@Hannahcamp6]

Does anyone know if this individual has her own channel? Love her craft work and her voice is so soothing lol

[@m.m.pawliuk2180]

How apropos! I'm working with your clay now!!💕

[@thatlovelydancerIlao]

I enjoyed your video and love put into it. Got a new subscriber who appreciates you❤️

[@luannfino1371]

Can you take a processed piece and lay it over tegular sculpy and then rebake it?

[@shybrencessa6848]

hi beautiful tiny pandora

[@donnaleelittle9664]

Awesome Teresa! You make things look so easy and relaxing! ❤️❤️🥰🥰🥰

[@michaelpinreno]

Thank you. That's a great idea for the windows. I think that I'll bake one big enough a stained glass door window a la Tiffany :)

[@clarissadasilva5722]

Hi where can I get sculpy transparent liquid in the UK please.

[@IAMGiftbearer]

Can you put any kind of glass in the oven or does it have to be a certain kind not to crack and where can you get it?

[@antiquemacabre]

"I know you're jelly of my corn sticks." I've never hit the "like" button faster. 😂 Thank you for a fun and helpful tutorial. I just purchased some clear Liquid Sculpey and am SO excited to try it out.

[@OrignialLostintheFifthcorner]

Me too! She's so much fun!

[@clk914]

Thanks for sharing these great ideas!

[@joyceparkes2678]

So many ways to use😻 Thanks Teresa

[@Dawn-MarieMiller]

I can’t wait to try this! Thank you!

[@leonanelson2444]

Wonderful, thank you for the inspirations

[@leonardthiago8816]

dunno if anyone cares but if you guys are bored like me atm you can stream all of the new movies on Instaflixxer. Have been streaming with my brother for the last couple of months :)

[@orionjaziel7342]

@Leonard Thiago yup, have been watching on instaflixxer for since december myself =)

[@vividvw3815]

Ok, so I have a question: what's the difference between liquid sculpey clear, and liquid sculpey gloss glaze? I'm trying to make doll eyes and wanted to avoid using resin, but have no idea which one would be best or if I should use some other varnish. I've been researching all day and getting so confused with all the options.

[@annabogart1844]

So relaxing

[@charofheart37]

Thanks for sharing clear polymer clay tips! 🤗❤️👍🏾💯

[@sharonmhyre6929]

Hi Teresa!! I am having some trouble with the liquid clear. I tried emailing on the Sculpey site, but no one answers. No matter how long I bake it, and several temperatures, it never solidifies. It just stays kind of gummy and sticky. I have tested my oven with a thermometer, the temp is correct. According to the directions, it gives a range of temps. I have tried all of them on separate samples for varying lengths of time, none seem to work. The highest temp I tried was 330 degrees Fahrenheit, for an hour. It isn't liquid anymore exactly, but if you touch it, it is really sticky and gummy and breaks apart like the fat crust on a bowl of liquid fat that has been allowed to sit awhile so you can skim off the fat. I am not sure what I am doing wrong. Any suggestions would be appreciated. I would love to make a window cling like you made.

[@hkreations5108]

Although I have tried this product (yet), try stirring in the bottle with a popsicle stick. Stir for a full minute. This works very well for me when I'm working with paints.

[@sharonmhyre6929]

Thanks for the suggestion, but I did that. The bottle had been sitting for a couple of months. I always stir them up and shake before using something that's been sitting untouched for awhile, no matter what the product is. But again, thanks for the suggestion. 😊

[@Hannahcamp6]

Update: found her! Now binging her videos 😊

[@Theperilsofbev]

Great tips as always! Thanks for the demo! :)

[@JaneThomas58]

Hi Pan, Do you know if the Clear will yellow outside like resin does?

[@callmesahara]

does it go clear when it dries? because it looked white straight out of the tube

[@RameyRocks]

This was I really cool video with lots of neat ideas!

[@gatanegracreations]

This was so cool Teresa! Thank you for sharing! I tried mixing red with a little black and some Glitter and got the prettiest little hearts! This literally opens up a new skill set! ❤

[@TeresaPandoraSalgado]

Amy Gutierrez I’m happy you enjoyed it.