Sea Doo Supercharger Wheel Upgrade Install (Part 1)

This is a lengthy one guys, but I promise you that you will see things here that normally get edited to make everything look SO EASY! Well, that’s not reality. Things don’t always go as planned. Stick around and I promise you’ll learn a thing or two.
#seadoo #fizzleracing #supercharger #diy
www.fizzlefactory.com/product...
brtparts.store/collections/fr...
rivaracing.com/riva-sea-doo-h...

[@one2zerojigawat]

That wrench has a peak torque mode. You can set this by holding FN, and the menu will change. You can then use the arrow to change to P.

[@SaltyDogPerformance]

I set it to the amount of torque I’m targeting. It will have a steady tone and red light to indicate when it reaches that torque.

[@AchikSarih]

Merci beaucoup ❤❤❤❤❤❤❤❤❤

[@OleksandrM777]

Can i torque the flywheel to 22ft lb? Or whats the correct torque?

[@Atris_965]

I have sedoo GTX 2004 Supercharged 185hp Can I just upgrade to supercharged without problems? Because I'm afraid when I upgrade the supercharger the motor might break Until now it is stock What is the Supercharger Impeller recommend? 16+PSI 18+PSI Or what?

[@codyroche2793]

You can do a et127 with 42 pound injectors.

[@vengeancestills]

Use a 1/2" drive ratchet to separate the supercharger housing timer at the top of the supercharger there's a space that's perfectly made for it. Insert the ratchet with no sockets on it and simply rotate your hand. Easy peasy

[@MrRaye3312]

I have a question for you, i have a 2020 seadoo 230 with 66 hrs stock the other day i was doing 63mph, stopped for 10min drove it again and i did 68 mph stopped for an hour and than did 63mph top again. Last weekend i when out i was doing 59 to 61 mph top would the supercharger be the problem

[@SaltyDogPerformance]

Typically when a supercharger goes out, it goes out and causes a lot of destruction. When is the last time the spark plugs were changed?

[@MrRaye3312]

@@SaltyDogPerformance have no idea i bought it with 26 hrs. Maybe never

[@SaltyDogPerformance]

@@MrRaye3312 change the plugs to start.