Sea Harvester: Hydraulics and Engine Installation

  Рет қаралды 3,593

Seaboard Marine Inc.

Seaboard Marine Inc.

3 жыл бұрын

In this video we take a look at the extensive hydraulics on this fishing machine. The original builder put a lot of work into this boat, but we felt there was a bit of room for improvement on the hydraulic systems. He had a nice pressure compensated pump, which wasn't being fully utilized as it lacked proper signal lines and the valves were set to open center. The pump was connected to a clutch which isn't really needed on a smart pump. Now the pump is set up to do what it does best, automatically compensate for load or lack thereof. We dropped the engine in for the final time. Getting close... Sea trials are right around the corner!

Пікірлер: 10
@stevecarlisle3323
@stevecarlisle3323 3 жыл бұрын
It's a pilot controlled piston pump. What is nice about these pumps is you can install a control valve at the helm so you can put the swash plate in neutral. Very common here in the Canadian PNW.
@br5498
@br5498 3 жыл бұрын
That’s a Swiss Army Knife of a fishing boat...owner knows how to get bang for the buck.
@SeaboardMarineIncVideos
@SeaboardMarineIncVideos 3 жыл бұрын
Agreed, it's really cool how he set it up.
@paulvlug812
@paulvlug812 3 жыл бұрын
Time for an update please, post more or speed up your work rate, your videos are great but more required 👍
@SeaboardMarineIncVideos
@SeaboardMarineIncVideos 3 жыл бұрын
Paul, thanks for the comment. I have to balance getting regular work done with youtube production. If we had more subscribers maybe we could justify full time video production (so subscribe everyone!!!) But I do have a few videos that should be going live any day! So stay tuned! More is coming!
@eyonjohnson1914
@eyonjohnson1914 3 жыл бұрын
Great job guys keep it up
@SeaboardMarineIncVideos
@SeaboardMarineIncVideos 3 жыл бұрын
Thanks so much
@paulvlug812
@paulvlug812 3 жыл бұрын
So to install a serpentine belt the oil pressure pump has to be removed, I guess that’s not a five minute job?
@SeaboardMarineIncVideos
@SeaboardMarineIncVideos 3 жыл бұрын
Yeah not the best design and we generally wouldn't mount a pump that way, but it does work and no matter what if you pull PTO power off the pulley your going to add time to a v ribbed belt change.
@stevecarlisle3323
@stevecarlisle3323 3 жыл бұрын
Not a big deal if you have fore sight to install a extra belt, secured, ready to go !😉
Sea Harvester:  Exhaust and Wrapping up the Project
9:41
Seaboard Marine Inc.
Рет қаралды 6 М.
3M❤️ #thankyou #shorts
00:16
ウエスP -Mr Uekusa- Wes-P
Рет қаралды 15 МЛН
ОСКАР vs БАДАБУМЧИК БОЙ!  УВЕЗЛИ на СКОРОЙ!
13:45
Бадабумчик
Рет қаралды 5 МЛН
تجربة أغرب توصيلة شحن ضد القطع تماما
00:56
صدام العزي
Рет қаралды 53 МЛН
Poclain Hydraulics Motor Technology
2:22
PoclainHydraulicsTV
Рет қаралды 95 М.
Sea Trial: Sea Harvester
15:43
Seaboard Marine Inc.
Рет қаралды 21 М.
How Grain is Sold at the Elevator
28:39
Farmer Grayce
Рет қаралды 32 М.
Open Loop vs Closed Loop Hydraulics
10:29
APT Specialist Hydraulics and Training
Рет қаралды 1 МЛН
Moon Light: engine Test, Propellers, Exhaust, and More
9:30
Seaboard Marine Inc.
Рет қаралды 9 М.
55.  13 Jul 24.  Great news about the batteries.
5:07
Bryan’s Electric Trawler Conversion
Рет қаралды 170
31 Bertram 380 Cummins QSB 380 Prop Test
3:40
jimmyg31b
Рет қаралды 36 М.
Home Depot LS1 Head Bolts? Dyno Kill Charts of ARP, OEM, L19 & More
21:35
Torque Test Channel
Рет қаралды 577 М.
Всегда проверяйте зеркала
0:21
Up Your Brains
Рет қаралды 10 МЛН
HAPPY BIRTHDAY @mozabrick 🎉 #cat #funny
0:36
SOFIADELMONSTRO
Рет қаралды 14 МЛН
HAPPY BIRTHDAY @mozabrick 🎉 #cat #funny
0:36
SOFIADELMONSTRO
Рет қаралды 14 МЛН