Seat LEON 1M 2001-2006 | Bi-Xenon HID projectors headlight Ugrade installation

[@Bitkata]

Perfect work, looks awsone!

[@innoticbeats2211]

Notice that these are Depo (or TYC) aftermarket headlights. OEM Valeo headlights are sealed with TOUGH permaseal which couldn't be opened that easy.

[@qba1012]

I have same problem :(

[@innoticbeats2211]

@@qba1012 I think it's nearly impossible to do this...

[@SamFisherK]

Well then for the last resort you could cut it around with a dremel and reseal it...

[@innoticbeats2211]

​@@SamFisherKI just noticing some inaccuracies of this "tutorial" dude. It may be misleading for owners with oem Valeo headlights keen on doing this.

[@Respec007]

The original valeo headlight the only way to open them is through heat gut around the edge of the glass (heating fast and with a flat screwdriver pusning the rubber, its awful, the sealant is super strong...)

[@niek532]

Does anyone know how to remove the headlight from the car itself

[@SamFisherK]

You have to remove the bumper first to get access to two bolts that holds the headlight underneath.

[@filip9248]

what is the name of the red cable with which he connected the dilak lights to the projector

[@Retrofitlab]

There is a connection to the projector for the bi-xenon mechanism which connects to the solenoid and one to the bulb.

[@itsssc9930]

I would be very happy if you show the light output...and light throw in night..

[@Retrofitlab]

Please see the product pictures for the light output; www.retrofitlab.com/en/aharon-mini-h1-ultimo-bi-xenon-projectors-1.html

[@norek12326]

elegancko świeci:D

[@deancostello5124]

Brilliant video, the results look amazing. Really want to do this mod myself on my mk1 leon cupra but I was wondering what exactly you used in the video like which wiring harness and shroud etc. Thank you.

[@pawelgalecki94]

1:10 - What kind of gasket you use, what is the name of this product and where I could buy it??

[@pawelgalecki94]

+Retrofitlab thank you :)

[@p0mp1tt0]

Are the high beams in line with the projector light? Because I'd installed one kit on my 2002 toledo, and the high beam in the distance is aiming at the trees :D

[@sergioarenasmacias6161]

¿Donde puedo conseguir las grapas metálicas que sujetan la tulipa al faro?

[@Retrofitlab]

No los vendemos, lo sentimos. ¿Quizás en Ebay?

[@AcousticFool]

Is it possible to fit a second projector on the inside of the headlight unit. And if so do you have to open up the hole?

[@Retrofitlab]

Perhaps, but I am not sure how much space there is in the high beam reflector. Perhaps Aharon Matchbox projector would fit: www.retrofitlab.com/en/xenon-projectors-1/aharon-matchbox-bi-xenon-h1-projectors-5.html

[@AcousticFool]

@@Retrofitlab Thank you for the reply, just one more question. When you use the H1 splitter to take power from the old h1 high-beam bulb to power the high beam motor for the h7 bi-xenon, is it still safe to use the original h1 live to keep the original h1 powered as well?

[@Retrofitlab]

@@AcousticFool Yes that is no problem! :)

[@sufm96]

Can you please show how it looks when the lights are switched on.

[@sufm96]

***** Ok

[@tonib879]

Hola hay que homologar para pasar la itv?

[@Retrofitlab]

Lo sentimos, el kit no tiene E-mark.

[@damianes4686]

This is 2.5 '' or 3.0 '' ?

[@Retrofitlab]

In this video the Mini H1 projector is installed. This projector has a 2.5 inch lens. We recently developed a kit for this headlight with a 2.5 inch LED projector: retrofitlab.com/products/seat-leon-1m-1999-2006-bi-led-halogen-headlights?_pos=6&_sid=350e31433&_ss=r

[@enriquevillalbalozano1372]

estos faros cuentan con los motores originales para regular la luz?

[@sergiodominguezgonzalez9700]

Is there any way to continue using H7 in short with the projector and H1 in long? I would be interested in continuing to use both lights as they come from the factory but using the projector with the short lights

[@MrSuenabien]

is this legal over UK?

[@DannyM9348]

Will the beam be accurate after installation?

[@DannyM9348]

Brilliant! Thanks very much!

[@gplusgplus2286]

Was looking at the link for my Leon 1M (2001) but it doesn't have the exact kit. What are the exact parts needed for bi-xenon? It has H7 for low beam and H1 for high beam

[@CryptoCroko]

why the projector have cable?? where you connect it? thanks

[@panagiotis_k8485]

I'd like to know which oem projector is equal to Mini H1 .For example 320 E90 bixenon and mini cooper not worthy .

[@pedrocarvalho4479]

hello.... Are the installation wires that connect to the plug specific? Is it possible to buy from any store? Do you have a specific name? thank's for video men 👍

[@pabloblondi524]

Hola me podrías decir dónde comprar lo que es la lupa para ponerla en el mío?

[@Retrofitlab]

Hi, you can buy the set here: www.retrofitlab.com/en/xenon-projector-kit/mini-h1-twin-kit-bi-xenon-projector-kit.html

[@CryptoCroko]

i have seat leon 1 and i want install it but i can install it with h7 halogen bubls ? becouse low and high bulb are seoarated ?? thank you

[@CryptoCroko]

Retrofitlab ooooohhh okay okay thanks man💪

[@filmfreaken]

Which butyl band would you recommend for doing headlight jobs, like this one? :)

[@filmfreaken]

How many mm is it, a 6mm band? :) I dont see any specs, and i live in the other end of the world, otherwise i would order from you

[@filmfreaken]

Thank you very much!

[@xXYannuschXx]

Absolutely illegal in Germany :/ You will need an automated luminous range control and a headlight washing system for it to be legal. There is one set out there that is legal in Germany, but that one costs over 1.000€...

[@xXYannuschXx]

***** In some cases overly strict. You can loose your insurance when you install a non-legal air-filter...

[@nickmo1997]

@retrofitlab. One Question does the 2.5 fits too? thank you

[@nickmo1997]

okay thank you ! so i try it... Hope it look good :)

[@ryanpithers4127]

When installed do they need to be adjusted and if so how?

[@Retrofitlab]

Yes, they will need to be adjusted to be level. This can be done by a level line on a wall for example.

[@ryanpithers4127]

Thanksss

[@gplusgplus2286]

Where is the ballast and igniter???

[@Retrofitlab]

The Aharon ballast is mounted near the headlight.

[@thejoseandresshow]

High beam splitter name at min 2:19 please!

[@thejoseandresshow]

+Retrofitlab Hey but those splitters appear to be completely different in Retrofitlab.com! :(

[@emilpettersson2066]

What size of the projector? I have the same headlight

[@Retrofitlab]

www.retrofitlab.com/en/seat-leon-1m-1999-2006-bi-xenon-mh1-halogen-headlights.html

[@CryptoCroko]

Hello , the diameter of projector is 2,5 or 3 inch ??? Thanks

[@CryptoCroko]

Retrofitlab ahh okay Thank you very much 💪👌👌

[@harrisonbass2009]

What's the Price of this configuration for two 1m headlights? I'am from Germany. Is it possible to send this ones to you and of course back to me?

[@SinePiston]

Este faro podría realizar cualquier Inspección Técnica anual de forma favorable??

[@adytutealca73]

No lo se tio, mo creo

[@kriskrisowski1913]

w taki typ soczewki pasuje zwykła żarówka h1?

[@Retrofitlab]

Yes, H1 bulbs will fit :)

[@ahmetcangungor]

Hello ! I want to know about lens marks pls tell me !!

[@ahmetcangungor]

+Retrofitlab what is the brand of this lens? I am looking about easy install and use all bulbs type lens

[@pedrotwodi2833]

Very go mi friend

[@pedrotwodi2833]

No ablas español??

[@pedrotwodi2833]

Brother Como Se llama el plastic what USAS para pegarlos deapues of cerrarlos

[@viljonkka3161]

Do you guys ship it to finland? is it even available anymore?

[@viljonkka3161]

Okay, big thanks!

[@UNSEENMONSTER]

Leon mk1.... 3" or 2.5" projectors?

[@UNSEENMONSTER]

Thanks! :D Sir ! . 3 inch can fit?

[@UNSEENMONSTER]

Thanks!

[@nickmo1997]

hi

[@J4cker]

Atest 8SD is missing :-(

[@martysobotenka9765]

Price?

[@Retrofitlab]

Check it out here :-); www.retrofitlab.com/en/seat-leon-1m-1999-2006-bi-xenon-mh1-halogen-headlights.html

[@martafacalet1123]

the projectors are Angel Eys?

[@laszlo_kovacs]

No, but f it's still relevant you can fit it into the Tuning tec angel eye headlight

[@Rai_Rafali]

Alguien me puede indicar los grados °C para una pistola de calor(decapadora)? El video sólo muestra los minutos aplicados (14min) Gracias!

[@Retrofitlab]

Usamos la configuración 1ª / más baja, que es de alrededor de 300 grados centígrados. Por favor tenga cuidado y use una temperatura baja, mejor prevenir que lamentar ...

[@Rai_Rafali]

@@Retrofitlab Ok. alrededor de 300°C. Una vez me ponta en ello, iré comprobando cada ciertos minutos para no tener que lamentar. Gracias por la aclaración.

[@Retrofitlab]

@@Rai_Rafali Sí, la caja de cartón no está muy aislada, por lo que la temperatura en la caja será un poco más baja. Cuando se calienta en un horno, la temperatura puede ser más baja. Y sí, buena idea vigilarlo :-)

[@Rai_Rafali]

@@Retrofitlab gracias, tendré sumamente cuidado!👍