Sebart Avanti 1,4m TechTalk setup edf WeMoTec

[@doverivermedia3937]

Fabulous video. I'm just about to embark on my first EDF, albeit way more scaled down to your beautiful planes. None the less, I'm learning a huge amount from your plentiful tips. Thank you for sharing. (Phil, UK)

[@dutkpio]

Wojtek cały czas mnie pozytywnie zaskakujesz, robisz te filmiki jak na zamówienie. Na mojej szafie stoi taki KIT Avanti :) Pozdrawiam (i na pewno będę Cię męczył telefonami) :)

[@nbowen3943]

I do not have the Sebart Avanti 1,4m (yet ;)), but I appreciate the technical discussion! Thank you for the video!

[@witwas1804]

Did my first flights last weekend on the avanti on 10s, it took off on grass in less then 30m thanks to the bigger wheels. it's a great plane as it flies way better then my other edf foamies, landing is more of a challenge, you really need the flaps, and a good landing prep in necessary

[@TheWITTERAT]

Thanks for the info.

[@tomstark7916]

you are amazing, I learned a ton thanks

[@sundayfloater2926]

Sorry, I`ve not quite understood the extension of the front landing gear. Coud you show it more in detail? And how does the front landing gear fit in the plane after extension with 2 cm more? And could you tell the Motor setup when flying with 2 x 6 s Lion?

[@coachPalle]

How do you mount your cover it is self-adhesive or should it be ironed on

[@pilotecorvette]

Hello! I'm watching all your video I can find from your on the mini avanti because I should get one in few days!! Apparently I will have the 3rd version?? do you think the nose landing gear has been changed for a longer one? You're talking about the thrust tube as well : I won't put the EDF in the back of the a/c, I won't be able to do it but could you show me how you avoid to put the elevator tube thru the thrust tube? Thanks for your answer and thanks again for all your video!!!

[@xhawkchief]

Hello, I just watch your video and interested on the lights you installed. Where did you purchase them, I heard you got them from Multiplex?

[@robertcampbell6349]

So you printed a fan shroud. I was curious how you got an HET 700 series motor to fit in a Wemotec.

[@leithpinckney5677]

Great videos. Can you send me the files for the printed part that eliminates the problem with the thrust tube hitting the stab spar. Thank you.

[@philippeveyt7961]

Very interesting video! What is your idea of putting cheater holes in the cockpit hatch? More air to the EDF means more static thrust, but there is also a possibility that air is sucked out of the fuselage because of low pressure air moving around the cockpit hatch while flying. I don't know what is best :)

[@frenchyinmunich]

Hello, where do you get your cheap 6s charger?

[@zikkmuy]

About sebart's design and the length of the front strut: did you follow the throws and mixing given in the Manual? If the problem is too little AOA then increasing the elevator throws could have been the solution. Don't you think?

[@EDFjetRC]

It didn't help. But extending front strut helped right away :)

[@zikkmuy]

@@EDFjetRC ok I keep the advice for the day I have my own Mini Avanti. Thx👍

[@johnmueller3573]

Great video . What radio do you use

[@bobadingo]

The Servo arm geometry is1to1 ratio so the torque remains the Same as what the servo is rated at! Measure control surface horn from Center of hinge and duplicate that distance on Servo arm this generates the optimal geometric efficiency for overall types of flying yet still retains as much servo linearity and control surface precision as possible!!.. .

[@johndonohoe9165]

Hi I have subscribed to your channel and I was watching your video on how to make your own cells . Do you know where I can get the printed discs that hold the batterys together . I live in the uk by the way.

[@EDFjetRC]

I can send you the stl files to print or get ones from your battery distributor.

[@carlosesilviamoreira5969]

Good morning EDF jet RC. I have a HET 700-68-2250kv motor, and I want to install this motor on the WeMoTec Midi Evo 90mm with 11 or 12 blades. Now I ask you. What is the store and code where I can buy this WeMoTec Midi Evo 90mm just like yours? I want my sebart mini jet to have a real jet sound. Thank you waiting for a reply.

[@AphexTwinII]

Exhaust tube 😉

[@stephanbinder3829]

Hi, can I download your STLs somewhere... there is no mail address... *smile*, great videos. I would like to try 12S on my mini avanti with a Jetfan 90...

[@afrog2666]

Exhaust?

[@joseluisgirondiaz9446]

Hello friend, I really like your work and I wanted to ask if you could sell me the files of the improvements and the 3d printed jet that appears in the video

[@ninjor8415]

Do you have all your stl files somewhere? How do i find your email?

[@leecornelius964]

I will take the to motor. Lee

[@leecornelius964]

Tp motor

[@ВоваИванов-г5с]

За такие бабки я лучше ф3а пилотагу возьму а не эту игрушку.