Cam Installed in the C6 LS2 Vette - - Incredible Gains!!!

[@threehemis5566]

Awesome video! I wss just looking 08+ but you've got me thinking about the 07 LS2 and a cam now. Some great deals on these cars out there too.

[@mcm95403]

I love your rear spoiler - very smooth looking!

[@schaffersgarage1444]

Great results. Ls2 corvettes ftw

[@bikotheanimator6169]

Excellent. This is the video I need to see.

[@tyjones1978]

The main reason people come to these videos is to see the horse power gain. And in every video it's difficult to see..when u could just say it..thanks for actually saying it

[@kgetorv988]

tyrone jones how much was it?

[@tyjones1978]

@@kgetorv988 he said like 521 at the crank earlier in the video

[@albysure9119]

Awesome.. I just got a cam n tuned C6. Differential is shot tho.. I gotta subscribe to you now.. keep posting

[@rokbottom999]

I like it when guys like u an I fix our C6,s better......even though the C8 is right around the corner....good vid.!!!

[@c7zftw777]

Sweet power gains!

[@vortecturbo]

That car is badass and that splitter is badass!🍻🍻🍻👊👊

[@MrPs391]

My c6 is literally identical to this. I love it. Literally same wheels red calipers lol

[@helomech1973]

My 09 with cam, headers and intake made 451 whp and 436 torque

[@larid1069]

hate when dudes don't use fender mats... sounds sick bro.

[@EnduroTainment]

strangely low torque numbers. I wonder if your tuner did enough for mid range timing...You should be into the 400's with that cam and long tubes. A FAST102 or ported stock intake will make a huge difference also.

[@dwaynejackman3885]

Is this a shop in md lol Hagerstown md- ? Looks familiar

[@stevebarker4681]

Sick man.i got a c6 z51. And have nice exhaust it sounds ok but. I think I want to cam it out.

[@michaelbrian7366]

I definitely need a cam. Especially at 5,000 ft above sea level. (Gasps for air) Current mods: SLP Blackwing Intake Corsa Axle back exhaust

[@dwaynebrake9067]

Were the headers 3 inch converting to 2.5 at the axle? Or were your billy boat bullets 3 inch? I have the b&b axle back bullets that’s 2.5. Thinking about kooks 3 inch headers and x pipe and wondering if I will notice gains if I don’t switch the axle back to 3 inches. By the way, I went with the same audio setup and the sound is great.

[@DovrDovr-rh7pd]

Where is that sligth ringing sound coming from? Sounds like its somewhere in the engine bay mine does that also..

[@rickygray7767]

What cam did you go with? Was it a btr stage 3?

[@rylanscott6341]

Hey man I know you sold the vette awhile ago, but do you regret the stage 3 cam? Do you think the Stage 2 would have been better ? I have a 06 z51 and I’m trying to decide on the Cam I want. I Daily it so I’m thinking a stage 1-2.

[@CorvetteFanMD]

Rylan Scott not sure why you think I sold the vette. I still have it and love it!! I absolutely 100% do not regret the stage 3 cam. Haven’t had 1 issue.

[@srvdean3024]

I've been looking for comparable builds to my own. I have almost the same setup. However, with your camshaft and CAI, I also did a FAST 92 ported intake, Ported and milled 243 heads, 1 7/8th headers, and Thrush mufflers. I did 493rwhp.

[@CorvetteFanMD]

SRVDean that’s awesome. Do you have an LS 2 or LS3?

[@srvdean3024]

@@CorvetteFanMD LS2. 2005 C6 M6 car. I've had the BTR STG 3 camshaft in 2 other LS2 cars now and it's just the best. I actually pulled a Vengenace racing cam OUT of my old GTO to stick a BTR one in. Great street manners if you can tune decently. I ended up at 28 degrees of total timing with a 12.4 AFR after peak torque. 93 pump gas daily driver car.

[@JesseCampbell]

I've been considering doing this cam. I have an 05 C6 with ls2, manual trans, headers, and corsa exhaust and Callaway cold air. I'm curious, what kind of mileage do you pull with this setup you have? Good street manners you say, No bucking at highway speeds? Highly recommend?

[@srvdean3024]

@@JesseCampbell 26mpg highway at 70mph.

[@JesseCampbell]

@@srvdean3024 that's great, you running the same stage 3 cam?

[@thedriverscorner]

On my list!

[@HarisPatel1]

I am loving the look of that splitter, could you share where you bought it or the model?

[@CorvetteFanMD]

Haris Patel got it from C7 Carbon.

[@craigtaylor7812]

I like you choice on parts. I hate to ask what may be basic questions, but: How much did all that work cost? Where is that shop located? Sorry if that info was in your video, I may have missed it. Those numbers are really impressive for an LS2, thus I'm hoping for a tad more out of the LS3 (M6), but we'll see. Also an obviously stupid question, but it does matter: How bad did that cam hit/hurt your gas mileage? Performance comes at a price, and I'm happy to pay the price, as long as it's not a ridiculous hit. I may opt for the stage 2 cam to try and save some of that, since I do take trips, but we'll see. Hope for a reply. Thanks.

[@CorvetteFanMD]

The Cam, springs and ATI damper plus install was 3K. Not really sure about the gas mileage... Unfortunately I didnt have very long to enjoy it before winter. I dont think it will affect mileage that much. The shop is located in Demascus MD. My advice, get the stage 3....the car really drives stock other than a lot more power when I hit 4K RPM and beyond....thats when it takes off...

[@d-one-and-only]

hey mate how is it pulling now that some time has passed? Was wondering regarding the upgrades ..... beautiful

[@CorvetteFanMD]

Paul Pulis thanks sir! I’ve not had any issues at all!!!

[@thediychannel6620]

Im a few thousand away from buying my c6 and i cant wait to mod it

[@CorvetteFanMD]

TheDIY Channel that’s Awesome... Good luck. BTW....I just put mine on the market it interested.

[@thediychannel6620]

Corvettefan117 haha i think yours is out of my price range tho im looking for one for around 12k

[@CorvetteFanMD]

TheDIY Channel True that! Good luck my friend.

[@CoolHandLuke002]

@@thediychannel6620 A C6 for $12k? Naw. Where

[@gainesb20031]

Hi nice car. What other mods did you have done at the time of this video?

[@nicholasandersen5681]

I have. 2007 c6 base. 55k miles. With only a a axleback, what should I do to get some good results? Or should I just leave it alone if it’s too risky for the engine to handle. My cars oil temp already runs threw the roof

[@RonGallardo777]

Do You have to do some adjustments on lifters or tune the motor every 20k ^

[@z512345]

Great enjoy. I'm next.

[@dover1966]

Did u do a stall?

[@sjcea0512]

How much did you pay for that ? I installed a Procharger setup for 6k and it's pushing 620 HP at the wheels

[@youngestson6537]

AWESOME.

[@billthompson9595]

great video! learn a lot. What cam and cam degree used? Thank you

[@CorvetteFanMD]

Bill Thompson Thanks. BTR Stage 3 cam

[@duckzor]

The sound comparison at the end was phenomenal. What does a Damper do?!

[@LuisTorres-nx9gk]

duckzor nothing, it’s just a reinforced replacement damper from the shitty GM stock one, wich was pretty bad, they broken everytime in tons on c6

[@james10739]

Are we talking about a harmonic balancer or something else

[@mikael4126]

@@james10739 yeah harmonic balancer

[@DovrDovr-rh7pd]

I bought that lip but i just notice it says its only for the z06 not c6 now i have to return it or do u think it'll fit the base model c6 is it worth trying to install it on my c6???

[@CorvetteFanMD]

Not sure about that. That C6 I had was not a Z06. Just a base.

[@joshuamora6778]

M6 numbers 👌

[@CorvetteFanMD]

joshua mora thanks! Definitely fun!

[@charlescupp5733]

B

[@panzerwaffen2873]

When you install a whatever stage cam right after that what else has to be changed ?? I mean in the engine ... Tune up is a must but what else

[@mariorios9463]

Depending on how big of a cam you go with I’m doing a BTR stage 4 cam and you can run stock lifters but Chan’s springs and push rods. I have an automatic transmission too so u have to go bigger on your torque converter I’m going with a 3,800 stall I don’t take it to the track but if you do you can go up to a 4K stall 3800 is the lowest you want to go with so you don’t have serges that makes your car pull at a light

[@panzerwaffen2873]

@@mariorios9463 thanks a lot for responding ...need to upgrade suspension also ?? Differential?

[@mikebuckingham5486]

NICE WORK!!!!! Did they have to upgrade your valves as well?

[@CorvetteFanMD]

Mike Buckingham not the valves..... Springs and rods were replaced

[@mikebuckingham5486]

Sounds great! I've been on the fence about doing this.

[@CorvetteFanMD]

I would highly recommend it!!! What a difference!!

[@zanehill6620]

Corvettefan117 out of curiosity what rods did you go with?

[@CorvetteFanMD]

zane hill I got what came with the stage 3 cam kit at BTR.

[@JaySiy]

I got the same vette, what exactly did you do under the hood, I might do the same

[@CorvetteFanMD]

Jameezy FUeazy kzbin.info/www/bejne/hWm0l2udjtaslas

[@gixxergarry]

What where all the mods to get to 450? Cam, exhaust...what else?

[@CorvetteFanMD]

I have a video in my channel that goes over all the mods but basically headers, cam, x pipe, high flow cats, straight pipe exhaust, ram air intake.

[@PayYourSelfBackMRYORK]

Very informative Corvettefan117!! Thinking about doing the same to mine...2007 black w/Z51 package

[@CorvetteFanMD]

PayYourSelfBack Awesome! You'll love it!

[@atthespeedoflife2150]

Can you tell me where did you buy your rotors and calipers from? And what's your rotor sizes front and rear?

[@CorvetteFanMD]

At the speed of life the rotors are stock for the Z51. The red calipers I got from someone in PA that powder coats them. I swamped my Grey ones out for the red ones.

[@atthespeedoflife2150]

Corvettefan117 ok cool because I'm trying to put some drill slotted rotors on my base vette. Any ideal of where to buy them.

[@CorvetteFanMD]

At the speed of life there are a bunch of performance parts stores on line. You can easily find and buy them on line. Good luck

[@atthespeedoflife2150]

Corvettefan117 thanks

[@king5.o486]

Ebay has the drilled slotted rotors with ceramic pads for $225

[@utahcountypicazospage5412]

Ls2 got the smaller cam and not very good intake manifold had they used the bigger zo6 cam and ls6 intake manifold from the factory it would have been a beast that's why they react so good to camshaft upgrades beside everything else is already done

[@JohnnyAnderson1]

ls2 and ls6 intake are exactly the same

[@omegasquad868]

incorrect that's been dyno proven any times the LS6 intake is better more flowing intake of the two

[@WESTSIDEDON]

@@omegasquad868🤣💯

[@james10739]

Why do people say "pulls like a freight train" do you mean those massive trains that generally have millions of pounds behind them but even so still are steel on steel wheels on track

[@MikeAW2010]

If you managed to cram a 15,000 HP freight train diesel engine into a car, it would haul like a bat out of hell.

[@jcohen985]

How much faster did your car feel after cam?

[@CorvetteFanMD]

Jules C OMG.... Night and Day....

[@Bige4u]

2:47 ... stomping happy feet are we?

[@DailyVetteLife]

How is the bullet exhaust with drone in the car?

[@CorvetteFanMD]

Only have noticeable drone in 6th gear at very low speeds. Other than that....it sounds great!

[@richardfreitas6465]

What cam do you have? And is yours a standard or automatic?

[@CorvetteFanMD]

BTR Stage 3. Manual

[@king5.o486]

Best 3k investment if you ask me💪

[@CorvetteFanMD]

king p agreed!

[@fireboy1614]

He was # 1

[@LuisGonzalez-rh3mx]

I'm sorry for ask but how much the labor?you car is so beautiful sound nice my vette is a c6 z51

[@CorvetteFanMD]

I don't really remember the exact breakdown. Sorry... If you are near Md, VA, DE I would highly recommend going to Bobby.

[@PGeorge61]

Corvettefan117 sounds like it. Dude behind the wheel is pretty damn knowledgeable. I used to live in the slower lower (harbeson). Great vid! I am looking to upgrade my '05 ls2, and this gave me some ideas. Thanks! Oh, and I will sub...

[@OrpheussZ06]

Corvettefan117 where in the VA area cause I live in northern Virginia/DC area and would like to know the shop that did all of this for you if possible?

[@OrpheussZ06]

Corvettefan117 where in the VA area cause I live in northern Virginia/DC area and would like to know the shop that did all of this for you if possible?

[@glenwoodjenkins3018]

What's up with that music bro got us vette driver looking soft as puddin 😂

[@ReconVette19D]

Lol what you play in yours? I play old school rap or some screamo shit lol

[@DTB_RARA]

@@ReconVette19D bone thugs or cake's fashion nugget album

[@ReconVette19D]

@@DTB_RARAthey're great man. I've been getting back into lord infamous and some prophet posse, scarlxrd is good for mixing genres, ghostemane, bones are good too. I'll switch right to some edm shit tho too lol

[@furythert8850]

How much was this in parts?

[@CorvetteFanMD]

FuryTheRT cam kit was $600 I think. Plus I upgraded the Harmonic Balancer with an ATI Super Damper.

[@supercoupe86]

How much did you pay for the entire cam package/install?

[@CorvetteFanMD]

Matt Finley about 2600

[@stymeg]

corvettefan117 Have you experienced any rise in water temp or engine temp after these mods ?

[@CorvetteFanMD]

Chris Gentry hey... No change in running temp and I run it hard plus drag strip time.

[@stymeg]

Thanks so much for posting this video. Your Vette looks just like mine except under the hood. Lol. I hope mine looks more like yours under the hood soon. Thanks & be blessed.

[@olemissjim]

Have you gotten any 0-60 and 1/4 mile times?

[@CorvetteFanMD]

Jim - I went to the track on the very last night of the season and I'm embarrassed to say that I ran a 12.7. I assure you that it is 100% driver error...LOL. It was my first time at the track. I will probably get new shoes this spring and go back.... I know I can get in the 11's.

[@Toys4Life]

12.7 is the launch and perhaps saving the clutch. the MPH is a sign of the horsepower - what was your 1/4 mile MPH?

[@vortecturbo]

Better to rich then lean. Sick car

[@captainamerica9353]

"Better too rich than lean"

[@camdenhanson7062]

Is it stick or auto

[@CorvetteFanMD]

Stick

[@jumpinjimmyg2164]

The lope is missing because you have an xpipe, hpipe would get it back, ask me how I know.

[@jimrowe4177]

How can we find Bobby Parks?

[@CorvetteFanMD]

i can give you his phone number. Can you message me on instagram? Are you in MD?

[@chemicalspore]

that room must be well ventilated, or yall were high as shit

[@michaelfulton8972]

You know we’re skipping everything except the sounds of the car at 12:12

[@6iixzero700]

I got 417 tq on bolt on ls2 !!

[@bowlingballmagic]

What you got on there? Ls2?

[@drewmorg.]

Lol just a flat line of torque across the board... freakin corvettes man

[@dvt1363]

HP number ?

[@CorvetteFanMD]

Watch the video. Lolololol. 520

[@dvt1363]

@@CorvetteFanMD damn we basically have the same setup except i went texas speed for headers and cam , still haven’t installed and i have the same vararam intake , should i buy the ATI damper and aim for your same WHP?

[@CorvetteFanMD]

@@dvt1363 I Loved that car. Upgraded to 2017 Grand Sport M7 about 2 years ago.

[@dvt1363]

@@CorvetteFanMD awwww man the c7s my goal too. but about your c6 were those your only mods ? i thought i’d only make about 450 with these same mods

[@DovrDovr-rh7pd]

Thats alot of power front those simple mods u got like 60 hp from that cam

[@CorvetteFanMD]

Actually a stock LS2 motor produces 400 crank HP...after the mods it was producing over 500 to the crank. I never did a base line dyno with the stock motor but 450 WHP is about 515 Crank HP. About 115 HP gain. It was a great car and I loved it.

[@francoismorin6806]

wtf ? 456hp okey but only 386 lbft ?!!!!

[@supercoupe86]

Splitter split yet?

[@CorvetteFanMD]

Matt Finley nope.... Still good to go... Although haven't been out much. Winter...

[@supercoupe86]

Corvettefan117 it sounds amazing

[@dover1966]

Stock transmission!

[@ricksworlddereaux2397]

it will overheat ..with stockradiator.....90% need aftermarketaloy one....

[@xbenxwilsonxhighlights7879]

Bro it's got an exhaust an cam. They don't over heat your engine. Unless your running more timing ect. But that's why professionals tune them.

[@NexusCapital]

The soyjacking thumbnail on the vid lol

[@ricksworlddereaux2397]

dont forget swap stocksuspension....to racecoilovers...OR YOU END UP IN A DITCH IF RACE>>>

[@ricksworlddereaux2397]

A VETTE IN EUROPE IS A PIMPSRACER>>>and hard to sell thesedays..i regret bought it.....

[@LSx-Z]

rick dereaux Did your uncle daddy touch you as a child? You have some issues

[@ricksworlddereaux2397]

no,you insane....go get mental help...if this happend to you?my advise pay him back...and then think positiv..negativity makes you sick....

[@oonothin]

Stickard0404 he's a nazi fuck, don't listen to him.

[@grant5648]

rick you are dumb as fuck. back to whatever country you are from lol

[@newnametrading]

what is the benefit of doing the ati super damper? like why would you change , that , please educate me

[@CorvetteFanMD]

JeremyRodriguez1 c6 vettes have a known issue with the harmonic balancer. They regularly fail and start to wobble which is not good for the engine. The ATI supper damper resolves that issue and insures the cars engine runs smoothly and lays down power the way it’s supposed to.