Thank you Soo much. This worked like a dream and I got upto 32kmph on my G2Max. 7kms (25-32) might not seem like a lot but trust me it is.
@DJIDudeX20116 күн бұрын
Yes it is. No problem👍
@ahmet172324 күн бұрын
I have f2 plus with NAGJA serial number on EU version with software 1.4.15 How i can unlock it please dude ? First method didn’t work and the second didn’t work too with a S i have 3 bip without changine the serial number
@DJIDudeX20116 күн бұрын
If you've updated it, it's not gonna work unfortunately.
@VeronikaLiskova-b7b12 күн бұрын
Will any of these work for ninebot f40?
@DJIDudeX20116 күн бұрын
The method 2 should work. Method one, not sure
@Badgengar912 ай бұрын
Thank you for this video! I was loving my G2 but was getting a little bored at 25km
@Badgengar912 ай бұрын
The only downside is it beeps constantly at 35km. Anyone know a fix for this?
@DJIDudeX20112 ай бұрын
You are welcome! I'm not sure why it's beeping
@WingsOverYPPH17 күн бұрын
Do you need to pay for the app?
@DJIDudeX20116 күн бұрын
No
@instars202726 күн бұрын
Does not work for european G2E model. Only works if you have global model (4th letter V). I tried, and I was only able to change serial within my region, but not the region - 4th letter Y. Firmware v1.5.2
@TopG-199115 күн бұрын
So not even the first method worked? I mean unlocking the speed in sport mode to 35km/h?
@ChoJun6922 сағат бұрын
@@TopG-1991 Nothing works. You will need to buy stlink and literally dismantle your scooter to flash older firmware and only then can you hack it. Good luck with that.
@denymosto579720 күн бұрын
In italy work?
@ogyunilveroitaliano628216 күн бұрын
No almeno io non sono riuscito a farlo ci sto provando da mesi ma nulla da fare dopo l ultimo aggiornamento è diventato impossibile tu hai trovato altri metodi ?
@denymosto579716 күн бұрын
@@ogyunilveroitaliano6282 no purtroppo no
@DJIDudeX20116 күн бұрын
I dont think it works in Italy
@masquecenamarada94517 күн бұрын
not working for me, it beeps 3 times and does nothing, I can't change the unlock higher speed, change change region either... G2 MAX please help
@ogyunilveroitaliano628216 күн бұрын
Same for me I dont know
@ogyunilveroitaliano628216 күн бұрын
In from italy and i cant unlock
@ogyunilveroitaliano628216 күн бұрын
May be for last upragde
@DJIDudeX20116 күн бұрын
Is it limited to 20kph? Has it been updated? Method 2 won't work if it's been updated and method one won't work for 20kph limited
@ogyunilveroitaliano62826 күн бұрын
@@DJIDudeX2011 no isnt limited to 20 kph is limited to 25 kph anway yes i updated
@surar17Ай бұрын
The app need license it will cost u 70€ in Germany
@highfi-vc5bcАй бұрын
Wont work for Germany if there is someone trying. The Controller wont let you change serial number.
@alexiiitbАй бұрын
same for Italy :(
@M.Mat.Ай бұрын
me too but first method is work
@misterel768420 күн бұрын
I’ve flashed with stlink and xiaodash but now I can’t enter the Segway app anymore :-(
@Pieter_Ай бұрын
When I get to the point where it asks me to press the power button to authenticate. It does not work. I press it a few times and than it doesn’t connect in the app
@timappeldoorn80992 ай бұрын
When i click unlock higher speed it keeps saying 25km . In youre video i see 35 .
@DJIDudeX20112 ай бұрын
Mine got glitched. You should still go 35kph even though it says 25kph
@timappeldoorn80992 ай бұрын
@@DJIDudeX2011 tried but is still goes 25 bad enough
@LankeyK2 ай бұрын
Would this work on the Australian version was about to buy a max g2 my f65 is flogged out lol
@DJIDudeX20112 ай бұрын
@@LankeyK yes. I'm in australia🤣
@user-fi3uu2ry8i28 күн бұрын
@@DJIDudeX2011 what about with latest 1.11 firmware?
@traves184Ай бұрын
This work also for g30lp nitbot unlocked to 35?
@ctvxАй бұрын
nope
@B777Cap3 ай бұрын
Is it possible to bring it back as it was originally and will I lose the guarantee
@DJIDudeX20113 ай бұрын
Yes. If you don't update it
@vovakorduban3940Ай бұрын
Did you buy the premium version to hack?
@Person-is2fcАй бұрын
Do you have to pay for the app?
@DarkMoxinhoАй бұрын
I have iPhone what can I do ?
@saiv462 ай бұрын
Btw first method works on latest firmware, including EU version
@DJIDudeX20112 ай бұрын
Yes.
@marcinbe68312 ай бұрын
U mnie niestety nie działa. Nowa hulajnoga, wersja EU, kupiona w Polsce, max. speed 20 km/h. Podobno mam z najnowsze oprogramowanie w którym nie da się zastosować metod pokazanych w filmiku.
@DJIDudeX20112 ай бұрын
Dam, that sucks. You need a new controller, or you need to flash it, which i dont know how to to@marcinbe6831
@X1X2X5X7X8Ай бұрын
Wont let me put 35kmh only 25 max?@@DJIDudeX2011
@ctvxАй бұрын
IT ACTUALLY DOES? oh my god dude thank you so much, does it work with F2 Pro on 1.4.15?
@Airsoft12345-JE2 ай бұрын
Do you think this would work on the segway F2 eu version
@DJIDudeX20112 ай бұрын
@@Airsoft12345-JE yes. Use method 1. Or 2 but instead of X, use S
@bilbobaggins4922 ай бұрын
No it doesn’t work
@DJIDudeX20112 ай бұрын
@@bilbobaggins492 are you doing it correctly?
@bilbobaggins4922 ай бұрын
@@DJIDudeX2011 on an updated firmware it will not work because it’s restricted 🚫
@DJIDudeX20112 ай бұрын
@@bilbobaggins492 yes. I know
@adian1700Ай бұрын
Does it work if master control is v1.5.2 ?
@adian1700Ай бұрын
i changed it to v1.11.1, does it work with that now?
@swwb842 ай бұрын
Все заработало по методу 1, прошивку не обновлял стоковую
@DJIDudeX20112 ай бұрын
That's good!
@RealWireliaАй бұрын
Is it one time?
@Idkmusic2722 ай бұрын
Hi! The second method doesn't work for me because I did an update recently. But in the first method, the app won't let me toggle on the higher speed in S. Any ideas why?
@DJIDudeX20112 ай бұрын
@@Idkmusic272 try to put your start speed as 0kph. Then keep toggling it until it turns on. Freely spin your motor while toggling it. You will hear it rev up when you are successful.
@shanovnui.pankarpo2 ай бұрын
hey, did it work?
@livb41392 ай бұрын
Does this work with ninebot f2 pro?
@DJIDudeX20112 ай бұрын
Yes. Same thing only change to S instead of X
@marcinbadocha55552 ай бұрын
Method 2 - czy zmiana numeru nie powoduje problemow z pobraniem aktualizacji ? Czy w razie potrzeby mozna przywrocic poprzednie ustawienia ?
@DJIDudeX20112 ай бұрын
If you change the serial number than update it, you won't be able to restore your old serial number as it will be locked.
@kevinpinto72812 ай бұрын
Doesn't work on 1.7.6!!!!
@DJIDudeX20112 ай бұрын
@kevinpinto7281 try method 1. Put startspeed as 0kph, then freely spin your motor. It should rev up when you're successful.
@AstralisCM2 ай бұрын
does it work on the newest update that came out like 1 or 2 days?
@DJIDudeX20112 ай бұрын
@@AstralisCM should work.
@AstralisCM2 ай бұрын
@@DJIDudeX2011 sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
@DJIDudeX20112 ай бұрын
@@AstralisCM dam. That sucks. You need new controller
@Oussama2Elmansouri2 ай бұрын
Does the 2nd step work in Europe ????
@DJIDudeX20112 ай бұрын
@user-fr1if3zb9y it depends if you've already updated it.
@shanovnui.pankarpo2 ай бұрын
@@DJIDudeX2011what maximum firmware version should be to be able to do this? does this work with 1.7.0?
@DJIDudeX20112 ай бұрын
@@shanovnui.pankarpo method one will work on any firmware
@shanovnui.pankarpo2 ай бұрын
@@DJIDudeX2011 thanks
@DJIDudeX20112 ай бұрын
No worries
@tiodeniz2 ай бұрын
What's the most optimal way of using this one? Updating the firmware and doing the hack or not touching the firmware uptades and directly out of the box do the hack? In both cases, will the warranty proceed?
@DJIDudeX20112 ай бұрын
@@tiodeniz nothing will be avoided if you use method 1
@tiodeniz2 ай бұрын
Do I need to upgrade the firmware to do such? Cuz everybody is yelling and recommending not updating any firmware via official app..
@DJIDudeX20112 ай бұрын
@tiodeniz you don't update firmware if you're going to do method 2
@tiodeniz2 ай бұрын
@@DJIDudeX2011 people are yelling not to upgrade the firmware cuz it messed up with the torque and some speed features as I've written.. I'm completely lost.
@DJIDudeX20112 ай бұрын
@tiodeniz just don't update your scooter if you are using method 2. Method 1 doesn't matter if it's been updated or not
@trxbeznl1172 ай бұрын
will this work on segway ninebot g30
@DJIDudeX20112 ай бұрын
@@trxbeznl117 I'm not sure. You might need to set it to global 30kph.
@trxbeznl1172 ай бұрын
@@DJIDudeX2011 I already hav that
@DJIDudeX20112 ай бұрын
@@trxbeznl117 oh. I dont know then
@jhonnedwardordonezbeltran55372 ай бұрын
Yo la compre aquí en Colombia y viene a 25km, más desde la app de ninebot puedes ajustar la potencia de el motor y subir la velocidad a 35km sin modificar nada, solo ajustes desde la misma aplicacion
@DJIDudeX20112 ай бұрын
That means you've already got a global version.
@jhonnedwardordonezbeltran55372 ай бұрын
@@DJIDudeX2011 siiiii , más en europa o otros países donde este bloqueada se cambia el num de serie y ya esta.
@DANIELRIVERA-eq9ke25 күн бұрын
Hola, y si te arroja los 35km/h aca en Colombia, a mi solo me arroja 32 maximo
@amingomezd24 күн бұрын
Donde la compraste que te da los 35? Yo quiero comprar una
@ALESSANDRO-kl4cz2 ай бұрын
Per jeep
@DJIDudeX20112 ай бұрын
@@ALESSANDRO-kl4cz ?
@muhammetaliozdemir49792 ай бұрын
Hello, does it still work for Ninebot Max G2? Currently limited to 25.
@DJIDudeX20112 ай бұрын
Yes. Use method one if you updated it. Use method 2 if you didn't update it.
@muhammetaliozdemir49792 ай бұрын
@@DJIDudeX2011 Will it cause any problems to my device? Warranty coverage is not very important, but I do not want to break or lock the software.
@muhammetaliozdemir49792 ай бұрын
@@DJIDudeX2011 If it doesn't work, can I reconnect with the original software?
@DJIDudeX20112 ай бұрын
@@muhammetaliozdemir4979 no problems
@DJIDudeX20112 ай бұрын
@@muhammetaliozdemir4979 yes
@admiramehic25863 ай бұрын
Will this work on segway ninebot G2 plus
@DJIDudeX20113 ай бұрын
Yes.
@DJIDudeX20113 ай бұрын
If Your talking about F2 Plus. You can do method 1 like the g2. Method 2 is different. Instead of changing the fourth letter to X, you change it to S. You can change to X and will still work.
@mistra7573 ай бұрын
@@DJIDudeX2011and for f2 pro is the same thing?
@DJIDudeX20113 ай бұрын
@@mistra757 yes
@mistra7572 ай бұрын
@@DJIDudeX2011so with the f2pro the 4th serial number must be changed with the S or the X?
@FridaBok3 ай бұрын
Will this work on any firmware?
@DJIDudeX20113 ай бұрын
No. It only works for non updated firmwares
@DJIDudeX20113 ай бұрын
Method one will work
@Some1sm2 ай бұрын
@@DJIDudeX2011 Method one will work with updated firmware?
@DJIDudeX20112 ай бұрын
@@Some1sm method 1 will but not method 2
@timappeldoorn80992 ай бұрын
Method one on mine f2 pro doesnt work .. when i swich on, unlock higher speed it still gives me 25kmh . Any tips @@DJIDudeX2011
@intuicio2 ай бұрын
Hi! Isn't XiaoDash paid? Last time I looked, they were asking for money within the app. On my MAX G2 Master Control: v1.5.3 (I haven't updated to a newer version since I got it) Can I hack on this one? Thanks
@DJIDudeX20112 ай бұрын
@intuicio xiao dash will want you to pay if you want to expand your scooters functionality. It should ask you to pay on the BASIC side. The app is free.
@DJIDudeX20112 ай бұрын
@intuicio it will ask for donation after doing method 2 but just ignore it.
@TheDannyAbroadАй бұрын
I"m also on 1.5.3 in Europe. Has anyone had luck? I wasn't actually able to connect to the scooter at all, don't know why. I've already connected and bonded to the Ninebot App before so I wonder if that had anything to do with why no connection?
@AstralisCM2 ай бұрын
sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
@Wailky20082 ай бұрын
What firmware were you on? I think I will end on the same fate Man man man I hate these German rules 400KM/H in the Highway is no issue But 35km/h on a scooter: 😱😱🚔🚔🚨🚨
@AstralisCM2 ай бұрын
@@Wailky2008 xDD I got the newest that is a few days ago
@highfi-vc5bcАй бұрын
@@AstralisCM did u try global and change to 01GXE... replaced it with x?
@norbinw2 ай бұрын
Master control 1.11.1 (yesterday was 1.7.8 or something) and not working. If I change the start speed to below. 3km/h, it gives me the message that only on global version.. More speed is S mode can't be toggled under any form. You think they update the app regularly (Xiao) to keep up with Ninebot patches?
@DJIDudeX20112 ай бұрын
What I would do is keep on toggling it while you are spinning your motor freely
@ilyadauen7656Ай бұрын
@@DJIDudeX2011could you do a video on this, I’m not able to unlock the 33 km/h
@highfi-vc5bcАй бұрын
@@ilyadauen7656 wont work for germany 😢 Region locked. You cant change serial number. They Made a special Controller only for Germany I guess.
@X1X2X5X7X8Ай бұрын
Doesnt work in Finland?
@WeStayWoke2024Ай бұрын
Can u make yours read 45 on the gage?
@DJIDudeX2011Ай бұрын
No it won't work
@shanovnui.pankarpo2 ай бұрын
for some reason second method gives me an error(probably because I've updated scooter) and first one doesn't work either. sometimes I manage to switch the "unlock higher speed in S" controller. but it just turns off every time I restart the scooter, and speed just doesn't change what's wrong?
@DJIDudeX20112 ай бұрын
Try to set start speed to 0kph, then keep toggling the S mode switch while the motor is spinning freely
@shanovnui.pankarpo2 ай бұрын
@@DJIDudeX2011 I can't set start speed to 0. But even if I put a scooter on some stand and spin motor freely, it just doesn't switch to higher speed now( probably it just doesn't work on european version or something
@DJIDudeX20112 ай бұрын
@@shanovnui.pankarpo yeah. Maybe try method 2
@sidi872 ай бұрын
I might not fully understand, does the first solution work with the original software as well, or does it also require hardware modifications? If yes, is there a solution for the Ninebot F2 Pro where the scooter doesn’t need to be disassembled?
@DJIDudeX20112 ай бұрын
@sidi87 method 1 and 2 don't require taking apart unless you need to swap a controller. MAX G2 serial convert:X F2 Pro serial convert:S Will work for f2 pro with method 2 and method 1 If you update your scooter and try method 2, it won't work for g2 and f2 series. That will require a new controller then. No modifications required.
@sidi872 ай бұрын
@@DJIDudeX2011 I cannot authenticate with the power button. The application keeps freezing. I don't have a region change button. I haven't made any modifications; everything is as it was when I took it out of the box.
@DJIDudeX20112 ай бұрын
@sidi87 ive got no idea what's going on with your scoot. Maybe look at a different solution.
@livb41392 ай бұрын
did you find a way to remove speed limiter from ninebot f2 pro?
@turbosnusaren2 ай бұрын
yo it does not work on ninebot f2 :(
@DJIDudeX20112 ай бұрын
Dam.. if you didn't update it, change serial number to S the 4th letter
@turbosnusaren2 ай бұрын
@@DJIDudeX2011 i did change it to S in the 4th letter but that did not work. But how to I update it
@DJIDudeX20112 ай бұрын
@@turbosnusaren turn on unlock higher speed in S mode