Seicane - Audi A4 - Android Head Unit Installation

[@krazykeith6001]

And I can now confirm that this has worked perfectly in my 2010 A3 with an xtrons head unit, and my amp, sub and rear speakers are as loud as they were before! Brilliant! Thanks!

[@SamLGND]

Any conversation needed for the a3? Or can i due it straight out of the box

[@scab555]

Just confirming, that this is video is still relevant:) Helped me to wire up my Android unit. It is not Seicane but has all the same appearance and wires, thank you!

[@krazykeith6001]

This is EXACTLY the information I have been looking for! Thanks!

[@army764]

A great channel. Plus in my opinion this is the best shape Audi they have built so far

[@TorqueSteer]

I think I would agree with that. I'd love a B8 S4 but looks wise, I love the B7 inside and out.

[@bogdanteodorescu5838]

Amazing informative video, helped a lot for both problems. Now my xtrons head unit fits great, and my amp, sub and rear speakers are working again! Thank you!

[@msf7699]

I will try this soon Update: Works perfect, sub works too without the extra cable👌

[@Dagowly83]

Followed your vid and i have all speakers working on my Audi A4!! Thanks again for the tutorial!

[@flack6686]

Hello and thank you very much. I have watched your video in detail and it helped to get the rear speakers working.

[@stephenlane80]

Excellent video, I was pulling out my hair trying to connect a similar head unit to what I now realise is a rear amplified b7 a4. Line level converter is on it way! I've learned a little but about amplified and pre-amplified signals along the way!

[@lmlebouef]

Could you help

[@stephenlane80]

@@lmlebouef sure, what do you need to know?

[@lmlebouef]

My harness looks different like I only have one connector to factory unit. And my rear speakers don’t work just bought line out converter and rear still has no sound.

[@stephenlane80]

@@lmlebouef I would need to see a pic, but generally you would connect the rear audio output from the head unit (seperate to main connection block), to the line level converter, then unpick the rear audio cables from your main harness and connect then to the other side of your line out converter

[@TryTriedTrying]

steering wheel controls?

[@bravo20ghost27]

Great video, mate. I had to watch it twice to follow but thank you, great information

[@Starlingscards]

Exactly what I needed! been trying to research how to change my A4 head Unit and this video explains it perfectly!

[@TorqueSteer]

I’m glad it was useful.

[@gilcruz1479]

Hi, I have a 2005 Audi A4 2.0T with Bose speakers. What do I need to purchase to hook up an Android head unit?

[@colinford1276]

Hi I have watch this video over 10 times now and just don't understand your taking the wires out of the plug that goes into the the car harness into the converter the rca's from the head unit into the converter how does the sound get into the cars harness sorry totally confused

[@SamLGND]

Same so confusing

[@BollasGeorge]

did you do this mod ? , if yes did have you answered your question cause i have the same question, if you take out the cables for the rear speakers from the plug that you plug in the harness of the car how the rear speakers which are empty on the plug now take signal ??? i am confused, i just ordered the converter . does the converter has outpout cables that you install to the plug to the possition that the previous cables where ?

[@radulescubogdan8549]

@@BollasGeorge i guess you already solved, but here: you remove the 4 wires in the harness(it doesnt matter what harness you have) you connect them with the adaptor, then you insert signal in in to the adapter and thats it

[@chopjockey]

Thanks a lot, I fitted an XTRONS head and bought a converter and now my rear sound works a treat! Cheers. Except for my sub woofer in the back doesn't put out any power. Perhaps something to do with the blue Amp wire not having another blue amp wire to connect to like in your video.

[@danniiliasoff2732]

Great Video. Question>>> I have the same Radio as the one that you Are pluggin in. My audi has the bose System in it. I have a Problem with a big bang Sound in the speakers wenn i press the Mute button, turn the Radio on ore wenn it shuts down. Any ideers what the problem is???

[@ehsanzabihiseasan]

I have the same problem but she turn on and off my car , did you find a solution ?

[@BollasGeorge]

have the known problem for weak rear volume, i ordered the high low converter to see if it fixes the problem , i have a question. do you have any info about making the front lcd screen in the dash work as it worked with the stock unit ? i mean to show for example what track are you listening ? i have the same head unit in the outside , the menus are a bit different though

[@gabitrandafir8396]

Hello. Does the can bus decoder come with the unit or is it bought separately? Thx!😅

[@db31415]

Actually, I have A3 but radio looks the same I presume there is not much difference. How will I know does my car has bose, semi or what? Presumably when I connect the radio, which speakers don't work will be the clue? Is there somewhere detailed instructions on how to connect and install this radio because I did not get any with it?

[@jacknife10000]

I have the same question

[@Ojisan642]

Damir Borković it’ll say Bose Symphony somewhere obvious on the faceplate of the factory system, and on the speakers. Mine says it on the cassette deck. If yours doesn’t say it, then I don’t think you have it.

[@lmlebouef]

Have similar unit but line out converter has more wires will it work, or do I need to return it

[@davidpelett]

does anyone know about the xtron model for the 05 a4 that is bose ready? also why do only the ones with android 9 instead of 10 have 4gig and 64 gig and the one with android 10 only has 2gig and 32 gig. what one is the newest best model?

[@mohammadhassan3675]

Where did you put the gps antenna

[@Dewiso85]

Need help, this connexion it's valid for Junsun screen for a seat Exeo? This radio and car use quadlock connector. Thanks so much

[@sb5633]

Hey, thanx for this video. Can you explain little more, if i have the bose system, what exactly do i have to do? And how many line level converters do i need then? One or two? Thanx for your response in advance

[@markys9037]

great video, but , the wiring to the hi lo converter i dont understand. you basically cutting the speaker wire FROM the head unit to the speakers , then re routing it to the hi lo speaker wires, and then connecting the RCA FROM the stereo to the hi lo converter ? so all connections are from the head unit TO the head unit. so, how can you get any sound to goto speakers from the car, if there is no wires from head unit going to them ? the wires from the actual speakers need to connect somewhere on the chain, but where ?

[@carloates4660]

I also was thinking this 2

[@ruly236]

Yeah I’m confuse with same quedtion

[@tigerholley3449]

Amazing video very informative on what I was looking for.

[@lmlebouef]

Did you get it to work

[@Betrion]

im sorry didnt understand the line converter thingy, where does the output (red and white plugs) go?

[@joeleach8453]

How do you get the new unit to fit/click in once it’s connected? Mine won’t sit flush and keeps coming loose

[@oscaracevedo2315]

i could not be an electrician, i don’t know much of this, are there shops where they install for people?

[@jamesking4613]

Great video, i have a A4 avant b7 2006, i need to connect the antenna power lead and I've ordered some noise/grounding connectors as I've got a horrendous interference sound through the speakers, that gets worse when the lights are on, anyone know how to remedy this?

[@pj4d]

I followed your video and even ordered the exact converter and I cannot get it going. Is there anyway to test the convertor as im certainly no nugget and assumed that I had done a good job soldering and connecting the leads as I have the Quad block. Beginning to wish I never purchased this Head Unit as the money & time I have wasted as I even purchased the DAB USB Dongle which only works with a WiFi network or when my phone is used as a hotspot. I hope you can help me however keep up the great work with your videos 👍

[@N54-]

I bought a new android head unit and for some reason the new unit is so much louder on the fronts but the rear have little power and no bass, will this also work for me? I have the square connector

[@trdtuner7]

Very very well made video. Have been scratching my head for hours trying to find someone with the exact same setup. Do you think I could use the antenna wire as a remote if I decide to install a mono app and sub?

[@JEGsGarage]

Do you have any idea what the voltage is for the Headunit pre-amp outputs? I have a feeling they are less than 4.0 volts and will cause poor volume/sound at things like a sub amp or factory speaker amp like you described. I wasnt able to find this information on their site.

[@casstransportllc8183]

Do you need to bypass the handbrake for this head unit for video function or access to other applications? I am in the process of installation and apps such as youtube and torque pro are not accessible due to the head unit thinking the parking brake is not engaged (even though it is in fact engaged) SOLVED

[@erwinvanriel5843]

I have the oem bns 5.0 system. I read somewhere that the android units are not working on that type of model.

[@rynomaree2112]

Can you please post a link for the iso harnesse you used from audi to aftermarket stereo? Thank you in advance.

[@InvisibleYetVisible]

Hi mate, decent little video this. Just a quick question, you said about creating your own S1234. This product isn't available anymore it seems so how did you do that. I looked at your 'diagram' but it doesn't actually make sense. You'd have two blue amp cables and you clearly don't, so how did you do that. I assume you're using a signal separation filter, but are you using two? Any and all help would be great mate.

[@johnmiller3450]

Hello great video please please help me I'm at a loss. When I turn ignition on my radio boots up then loses all power. So radio come on as I turn key on for 10 seconds then dies. Do u know what could cause this please Audi a3 09 same head unit

[@ercides3463]

Wait. So i need 2 of the line level converter for the bose system???

[@bandit911]

Yea that's what I want to know too 🤷🏻‍♂️ I'm kinda guessing you would need 2, but if anyone knows for sure it would be a great help

[@ercides3463]

@@bandit911 yeah me too

[@ercides3463]

@@bandit911 i got it yes. You need to line level converter for the full bose system

[@bandit911]

@@ercides3463great thanks for the info👍🏽 sorry for late reply, only getting to change my stereo this week👍🏽

[@ΝικοςΤρουλακης-δ6χ]

very good video simple and understandable I made it immediately thank you very much my friend

[@whitt87]

All 4 of my speakers are controlled by amp.. Is there a line convertor for 4 channels? Or do I use 2 of 2 channel convertors?

[@TorqueSteer]

I don’t know about a 4 channel, but you can use two lots of converters without any problem :)

[@Frasidenamou]

First of All Great video! I have the same one in my car, but i can get the Audi logo to pop Up, when i start the car. Do you have any idea why?

[@kondededinamarca]

The oem subwoofer works?

[@juarysilva559]

Hi mate, i have a 2007 audi a3 8p and im looking to buy the exact same radio as yours. Does the a3 have the same problem with the amplifier? Great video and thanks in advance

[@ehsanzabihiseasan]

@Torque Steer So would you need line level converter for both the rear and front for the full bose system? I have the b6 s4 with the Bose sound system and when I turn my car on and off there is loud bang from my speakers and also when I rev the engine I can hear my speakers whining sometimes with the Rev of the engine. Do you know what that could be from ?

[@TheTDRaF]

Will it work with can bus?

[@diegomagallanes2903]

What home screen is that? It’s really cool!

[@radulescubogdan8549]

ty mate. aliexpress confirmed your video before i did the job. i'm not good with cables, so if i can do it, anyone can do it

[@yoHRZN]

nice looking head unit random question but i was wondering if you've used or know of a good spray based seat cleaner that would work with cloth seats, i would use a vax but the vax i have is rather terrible and basically falling apart so im going to have to stick to a brush and a cleaning product for now.

[@TorqueSteer]

I'd say correct techniques make more of a difference than the product used. This guy done a great video that's worth checking out kzbin.info/www/bejne/oITNl5mlmqyKatk

[@craftyranger3717]

If I wanted to install a aux cord how would I do that?

[@ScotsFrog]

Good video, just a quick question, whats the connector that holds your iPhone cable on the dash? thx

[@TorqueSteer]

amzn.to/2PiZigl

[@cosminpapp3141]

For audi a3 2008 8p cabrio is good ?

[@michakubicki6499]

How did you connect the charger cable?

[@PauloFerreira79]

Hello. Do you have information of radio station in dashboard/instruments? Great video

[@NinoArtAirbrushCRO]

hii, I have a problem with sound, very bad quallity and low sound in my Audi TT 2013 (china android head unit). sound is low and you can hear noise in sound. Did you now what the problem is? Android unit have connection (cable) like original Audi (plug and play)...

[@wizardzx2]

for the bose system should everything just connect using rca from the aftermarket unit? Will the level provided by rca be strong enough for the amp?

[@TorqueSteer]

I'd give it a go like that first. You might get away with it. If you find you're having to turn the volume on the head unit up quite high and it starts to distort then I'd give the hi/lo converter a go.

[@AlgVideoEdits]

I did connect everything like in the video but I have a beeping sound and still playing the only subbufer

[@ScootieXP]

Hey man, very nice video. I recently aquired a Wondefoo/Aycetry HU with DSP, it sounds really good however, rear speaker have lower volume by 25-30% Id say. With your tehnique I could up them a little problem is, my HU doesnt have the blue wire AMP CON. Please advice. :)

[@seanfascia9143]

Hi i followed all the steps and i am getting no volume, any ideas? Thanks

[@robthomas7232]

Well I found it entertaining ;-)

[@thetraindriver01]

Great vid, what was the name of the black fabric tape you used please? Thanks 👍👍👍👍

[@TorqueSteer]

Tesa tape. I think the link is in the description.

[@michaelrusso4913]

Does this head unit have connections for a subwoofer?

[@Lucasko.69]

many thanks for showing how to conect blue antena cables

[@juzik43]

Hello, I bought such a radio, everything works, but only the speaker, front, back, does not play what it can be

[@ModernTriicks]

Is there a head unit for the Honda Civic 2006?

[@ElleGiTube]

PME70AA4L è questo modello?

[@xxkaderxx08]

Does it also mirror iPhone apps?

[@joseesanchezjr.1288]

Does your car b7 have control s on the steering wheel?. Do they work with this "plug n play" stereo.

[@TorqueSteer]

Yeah, I have the MFSW with controls. They seem to work fine with the exception of the talk button. I wish that could be mapped but the head unit's software doesn't seem to allow me to.

I bought a very similar aftermarket radio but when I plug it in it does not work. If I press the reset button near the sd card, it flashes its lights only for a second and then nothing...

[@carloates4660]

Do i need a line level converter for the rear speakers to work

[@TorqueSteer]

No, but they will be a lot quieter than the front speakers if you don’t.

[@noahporter4487]

@@TorqueSteer Would you still need to remove the wires from the bus if you didnt go the converter route?

[@clementfpv5054]

Hi, I have the exact same issue, and ordered the same line level converter but it didn't fix the issue, basically my line level converter gives the same sound at max than before, and only less sound if I unscrew the setting wheel. I also checked that I get +12 on the white wire to command the rear amp. Any idea ?

[@clementfpv5054]

turns out I have 3V on the stock pre amplified signal, WTF audi ?

[@ВалєраКозачок]

Did you find a solution to this problem? I have the same situation

[@clementfpv5054]

@@ВалєраКозачок yes, basically the amp is working but at a lower level, I changed the levels of the rear speakers in the headunit menu until it was decent

[@ricardobarros7011]

Is your dashboard giving radio information?

[@BollasGeorge]

Any luck solving this ?

[@kriss8566]

Bonsoir j'ai exactement le même poste Android depuis 2ans. Question svp; comment mettre à jour le poste ? Car j'ai des applications qui ne fonctionnent plus... merci à vous 👏

[@virgo64]

Great informative video. I currently have an Eonon stereo in my 2006 A4 and I also ran into the tight fit, so good to know that it wasn't anything that I did wrong. Knowing that I should trim a small amount off of the top will definitely come in handy with future mods. The question I have today is if there is a substantive difference between the aftermarket Android head units from Eonon, Seicane and XTRONS. I'm finding the Eonon to be subpar with its 2GB memory, 16GB storage and Android 6.0 operating system. Considering replacing it with either Seicane or XTRONS to bump up to 4GB memory and 32GB storage along with Android 8.0. Any benefit to that other than the obvious upgrades? I'm a bit leery about the "line converter" as I don't believe I had to do that with my current installation. Not sure I should be cutting and splicing wires. LOL.

[@TorqueSteer]

The Seicane and Xtrons seem to be the exact same unit (it even says xtrons in the manual). From what I’ve seen, the two places my head unit seems to have an advantage is the instant on and more ram. There is very little loading involved since everything is stored in its memory until you do a full restart. I wouldn’t worry about splicing the wires with the line in converter. Like I said in the video, the rear speaker wires don’t lead anywhere so there’s nothing to lose. You could always join them back together if you wanted to :) I did face a similar problem with the rear speakers with my Pioneer but that head unit allowed me to boost the rear preouts slightly so I didn’t need a line lever converter. I would say it’s a necessity with this head unit though since you lose a lot of bass since the rear subwoofer will be very quiet otherwise.

[@virgo64]

Torque Steer, THANK YOU for the quick and useful response! 😉 One other issue I need to resolve, which I failed to mention is poor radio reception but this also started with the factory RNS-E so it's very likely a faulty or failed antenna component in my 11-year-old A4. 🙄

[@TorqueSteer]

No problem. You are welcome :) Hopefully, it’s just one of the plugs that have a bad connection. Although, just tapping the blue antenna wire together with the appropriate wire on the head unit should at least let you know of the antenna amp is powering up.

[@edunagringa]

I have the same unit but how do I get that interface?

[@monchotdl-y9c]

Great vid man :) Helped a lot. just How to connect factory subwoofer in audi a4 b7 ?

[@joseesanchezjr.1288]

Soo... What about the bose sound system. I think your video is great 👍. Is it the same for the bose system?

[@TorqueSteer]

It should mostly be the same except you'd have two sets of RCA's (1 front, 1 rear) since all the speakers are amplified from an external amp on the bose system.

[@ehsanzabihiseasan]

@@TorqueSteer so you would need line level converter for both the rear and front ? I have the b6 s4 with he Bose sound system and when I turn my car on and off there is loud bang from my speakers and also when I rev the engine I can hear my speakers whining with the Rev of the engine. Do you know what that could be from ?

[@rudolfdebod8330]

Which launcher are you using in this video?

[@TorqueSteer]

Car launcher pro with the leather theme.

[@hiiiyou8678]

Is the screen oled?

[@TorqueSteer]

No.

[@paulomartins5011]

Gostaria do vídeo para Audi A3 sportblack 2012 com o mesmo explicativo

[@DDinVT]

Great vid. Perhaps som1 can help me, just got this same head unit for 05 Audi S4. OEM radio only has 2 harness plugs, doesn’t have the 3rd that would plug into center of adapter plug. Anyone? Thx

[@TorqueSteer]

Do you have the Bose system in your car? I'm guessing you might be missing the speaker block on the ISO harness.

[@DDinVT]

Torque Steer, Bose symphony yes. But... was able to get it figured out, rather som1 figured it for me. It had an rca harness that I hadn’t hooked up, had no idea about it. No install instructions were included. Up & running now, all plug & play, fortunately didn’t need converters. Very pleased with unit now! I really appreciate the reply!

[@HeliconPath]

So I've seen people trying a few different methods, this one seems to not need the hi/low converter? kzbin.info/www/bejne/e6uUqpuhnsyqmNU Just wondering what you think. Also, did you have issues with electrical hiss/noise when the headlights are turned on?

[@17Shkurt2008Pavarsia]

I saw him taping the radio and starting the dremel tool, I was like f that. I'm not buy that radio lol

[@CostaMokola]

Well looks like our names are pretty closely related

[@Richard-np4ux]

Factory password not working for me

[@josemanueloliveira7524]

Try 8888

[@Lenio0]

Mine bricked after 6 months, wouldn't recommend buying this

[@JatinderSingh93UK]

First

[@TorqueSteer]

Indeed.

[@DipsProd]

Waste of my time doesn’t even show how to actually secure the head unit in place

[@viodon48]

It secures itself I have one in my a6