love that wet thumb tip, makes a ton of sense yet I'd never of thought of it
@johnandrews12872 жыл бұрын
Thank you. I purchased some imported leather from you in Waco at the show, loved the way it tooled. THANK YOU.....
@CrossTimbersSon2 жыл бұрын
Great information! Thankfully, the more reputable tanneries have informational KZbin videos and can easily be found online showing their process and the impact they have on their local environment. Some tanneries are not so quick to share that information. Purchasing from responsible tanneries is definitely a wise investment.
@Terry-72 жыл бұрын
I appreciate the explanation. I am still learning about the leatherworking craft and this topic is definitely something to pay close attention to. Could you maybe touch on leather thickness and examples of good uses of each thickness for another video idea?
@makersleathersupply12202 жыл бұрын
I can do this
@windwolf37582 жыл бұрын
Very good one. Just one suggestion... the 2 minute tips should become 10 minute tips... I like the slightly longer, more thorough tips... thank you again for this one, it was great 👍
@mattphipps13682 жыл бұрын
Unfortunately I can't handpick the leather I purchase because the nearest shop is just too far away. One thing I've had difficulty with is the temper of a leather. How do you know or how can you discover how soft or firm a leather is without being able to get "Hands-On"?? Also, would it be possible for a video on how to properly condition hides and/or projects?
@bobchronister3429 Жыл бұрын
As always your explanations are very helpful. Thank you.
@johnnymoya85412 жыл бұрын
Thank you for all of your helpful videos.
@littlepacificstudios2 жыл бұрын
Is the imported leather you had said you really enjoyed working is this like Tandy leather that comes from Mexico or Brazil? I enjoy watching your videos by the way and have watched several. I have a small leather shop. I started with Tandy little kits for a little bit and went right into my own stuff making my own belts, rifle sling, purses, and a few hats. I have bought Herman oak and do enjoy some of the qualities but actually I really like the Tandy leather as its just softer and feels really nice for much of what I like to work with. Tandy in Tacoma Washington has been beyond excellent. They have several women that have worked for Tandy like 10 years. I like Tandy's upper grade A full grain leather. Is this the leather you like? I do like Herman oak as well.... :)
@makersleathersupply12202 жыл бұрын
It's more like Tandy's euro blend. Super smooth and soft.
@Cobra-ky9bt2 жыл бұрын
Hey. Aaron, good stuff. I got those 10SPI pricking irons yesterday from the watch band video, and I honestly don't know how I've lived this long without them. Incredibly good. Beyond what I imagined they'd be.
@sparksandchips2 жыл бұрын
thanks for the validation on the leathers, I got a belly to pracatice on and as you say it will stretch even though I put tape on the back. I decided to make a personal addition to boot bags for my Lucchese boots and used the belly. All went well to last piece. I love a basket stamp since childhood and tooled the belly with that and the last one was mushing over when I tried to stamp. Fortunately I saw it early and was able to accomodate for the leather and it turned out ok.
@debmackie3852 жыл бұрын
Thanks for the info! A few years ago, I got a couple of econo imported hides from Tandy that to me STANK of piss-I thought I was crazy but now I know it was real!!! It was horrible to case too-practically had to rub the water into it. I'm loving that W&C russet right now. Good to know you have decent imported stuff too.
@jayhall40642 жыл бұрын
Just a new person learning to work with leather. What is the best way to cut a side of leather to yield the most useable amount of leather for projects?
@kingsolomon89462 жыл бұрын
How do you get a leather supplier to send you good leather when you buy it on line ? For some reason whenever I buy online they send me leather with multiple flaws
@makersleathersupply12202 жыл бұрын
Find one you can trust and have a good relationship with them. That being said, you must keep in mind all leather will have flaws. Suppliers can't just keep the flawed leather and sell the perfect stuff. No-one has ever called a store and said "just send me any ol crap you've got"... but almost everyone says "send me your biggest and cleanest piece".
@miker7942 жыл бұрын
Thanks for video. Did you mention the import you prefer. ??? M
@jonandicochea84042 жыл бұрын
Great job Aaron, I'm going through the same issue right now. I've been buying lesther from Tandy and it's been junk...so I think I'll try some Herman Oak and Weavket and Greag.
@Cobra-ky9bt2 жыл бұрын
Careful with HO. I bought a shoulder from Springfield a couple of years ago and it was garbage. Grain side was covered it bites and scars, and the flesh side looked like it had been taken off with a hatchet.
@nicholasnelums66682 жыл бұрын
@@Cobra-ky9bt Give Maker's an attempt to prove to you what quality HO looks and feels like. I have not gotten a bad side from them.
@Cobra-ky9bt2 жыл бұрын
@@nicholasnelums6668 I'm seriously considering it. Everything else I get from Maker's is solid, but I've not pulled the trigger yet because the piece I got was so spectacularly bad I don't want to spend the money again.
@alandrewgibson2 жыл бұрын
Nice but which country do you source your imported leather - Europe, U.K. South America? Etc
@makersleathersupply12202 жыл бұрын
That particular piece comes from Turkey.
@alandrewgibson2 жыл бұрын
@@makersleathersupply1220 I would not have guessed that - thank you!
@judithwright50842 жыл бұрын
Thank you I love these videos ❤️
@pamelalittlefield4608 Жыл бұрын
Nice review Lol!!
@martinstults94192 жыл бұрын
Tandy will probably take exception to me putting a wet thumb on all of their leather. I'm sure other customers will. Maybe I'll try it to see how they respond.
@makersleathersupply12202 жыл бұрын
If a store takes offense, they're worried their leather may not pass the test... and their employees probably don't know much about their product.
@josephcarey70422 жыл бұрын
What is the name of the imported leather for ordering purposes?
Where I can buy good leather?? Thank you for reply. Are there any stores or internet? How to find?
@makersleathersupply12202 жыл бұрын
What country are you located in?
@makersleathersupply12202 жыл бұрын
@@galagrym7009 there's lots of great suppliers in the USA. We are one of them. www.makersleathersupply.com
@galagrym70092 жыл бұрын
@@makersleathersupply1220 thank you soooo much!!!!!
@larrycumba2741 Жыл бұрын
Is there an area of a side that tends to have more bug bites?
@makersleathersupply1220 Жыл бұрын
The softer parts like the belly and shoulder will have more of those spots.
@grahamtpeterson Жыл бұрын
anywhere they can't reach with their tail!
@kingsolomon89462 жыл бұрын
Arron we’re is the best place to learn floral tooling?
@makersleathersupply12202 жыл бұрын
Lots of resources out there. Are you looking for in person or videos and such? If in person then where are you located?
@kingsolomon89462 жыл бұрын
@@makersleathersupply1220 I live in a remote area in northern Nevada .. i’ve watched about all the KZbin instruction I can but I think I’m to the point I need in person…
@Thea_MojaveOutliersWhipmakers Жыл бұрын
...wait...are we talking you can see the ridges in your thumb *print, or just the outline of your whole thumb?
@makersleathersupply1220 Жыл бұрын
Whichever.
@Thea_MojaveOutliersWhipmakers Жыл бұрын
@@makersleathersupply1220 Depends how much drool you get on your thumb, I expect. Okay, that helps. :)
@jenniferwhite60892 жыл бұрын
awesoem video question look at some leather machinery and tools not sure about the leather they have estate sale it is there father did leather work too the leather is very dry been sitting a long time too can hides be save or walk away from them too
@makersleathersupply12202 жыл бұрын
They can be rejuvenated with products like Lexxol as long as they're not too far gone. Fold a small sample in half (smooth side out) and if it cracks, it's too far gone.
@tylerjohnson38632 жыл бұрын
It's yourapeein leather
@doughboylsog2 жыл бұрын
Can you explain how to use a Tandy leather thickness gauge
@makersleathersupply12202 жыл бұрын
The little wooden thing or an actual Guage that is like a caliper?
@doughboylsog2 жыл бұрын
@@makersleathersupply1220 the actual caliper I have the small metal one
@makersleathersupply12202 жыл бұрын
@@doughboylsog I can help with that.
@doughboylsog2 жыл бұрын
@@makersleathersupply1220 awesome
@Stryker22 жыл бұрын
@@makersleathersupply1220 Is it likely that y’all will ever sell a deeper throat mechanical gauge similar to the BuckleGuy one but less expensive than theirs?
@Handles-R-Lame2 жыл бұрын
I think you should change the name from a "2 minute tool tip" to a "few minute tool tip" lol 😆 just kidding but not really haha
@Freeman-Dl702 жыл бұрын
More people would try being a leather worker, if they didn't cost so much. I've seen a $300.00 price tag, that equals a month of electricity in this greedy day and age.
@youknow9328 Жыл бұрын
You know how much a raw fresh off the cattle hide sells for to a tannery ? Two years ago when I sold mine ....3 bucks 🙄. Now I highly doubt they have as much invested as they charge for. I’m sure markup is insane.