Fix Nest Hello Power Problems

[@jordaust]

This video has completely fixed my months long problems with my nest hello! Our nest hello worked for many months with some minor problems disconnecting off and on, but over time it got worse and worse. For the past 6 months the camera has been virtually unusable because it would actually disconnect from the internet about 100 times a day, causing me to spend hours upon hours trying to figure out if my network wasn't working. I've spent hours trying to get help from nest support but they are not helpful and have mostly just blamed my network. In the past few weeks it started to dawn on me that maybe there was a power issue that was causing the camera to disconnect because it wasn't high enough voltage. Earlier today I stumbled across this video, interestingly the wall chime used to work but had since stopped, likely around when the camera started acting up. After watching this video I quickly ran over to the wall chime and bypassed the chime as outlined in this video, seconds later the camera started working 100%! It's like a dream, I had all but completely given up on this nest hello and was so close to just ripping it out. Thank you, thank you, thank you! I will gladly donate money to you or buy you a coffee, you have saved me from so much frustration I've been experiencing for months! Thank you!

[@JesseJamess]

Same issues now, and I have no idea what to do. It's like my nest doesn't have enough power from the transformer. It was working perfectly then stopped. How did you wire it?

[@jordaust]

@@JesseJamess I just did exactly what is shown in the video starting at 4:45 where you wire bypass the nest chime

[@imQurnot]

Awesome solution. Thanks!

[@sellgooddeals-DIY]

Thank you so much for your support!

[@reylflores]

Wow! This worked. Constantly going offline like 100x a day. So far so good. I was about to go out to buy a new one. After replacing our wifi router and having Comcast come out to check the lines, it was the damn chime causing low power to the Nest doorbell. Thanks!

[@EdV22]

This got it working!! Thank you!

[@sellgooddeals-DIY]

Great job getting your Nest working! Thank you so much! I very much appreciate it.

[@nikelosbangle7303]

I really appreciate you sharing your solution. My doorbell was offline more than it was on, and it was driving me up the wall and nearly through it. The wifi connection to every other device was fine. I even have a mesh point 5 feet from the door and set the Nest Hello as the priority device. When I then investigated the power situation, I couldn't find the transformer anywhere in my old house. I was about to give up and call someone. So this tutorial and your advice really helped me out. Thank you for making it easy to understand. I don't mind retiring the chime and relying on the Google Assistant, as long as it works and doesn't go offline every few minutes. So far so good. Thanks again!

[@tomandbiancaestrada9502]

My nest doorbell has had the yellow light since we installed it 2 weeks ago. After watching your video, I ran the nest app again and told the app that the doorbell has green light, and voila... no more yellow light and my doorbell video now works!!! I will check the voltage next (if I can find the transformer) and possibly just bypass the chime like you did. Thank you so much for sharing your experience and this video!

[@caseycoleman8032]

Wish I could buy you a beer or three. I spent WAY too much time trying to locate my doorbell transformer. I'm convinced it must be hiding behind a wall or something. I can't locate it. This trick worked like a CHARM. Got the camera up and running. And with a little tweaking, my Google Home Mini is alerting me to visitors at the door and the camera feed automatically pops up on the Hub. Thank you thank you for the informative video. You really fixed my issue.

[@jms3533]

Exactly. I live in a home built in 1951, and no idea where the transformer is located.

[@kennyfranklin6768]

Older homes may have the transformer installed inside the main electric panel. You are not allowed to that now.

[@calvinriley8683]

Great video and solution! I'd add... If you have a front and rear doorbell, you'll need to combine front/rear/transformer together rather than only the front and transformer to complete the electric "loop"

[@kdel45]

Thank you so much for this video!! I got the dreaded yellow ring, indicating that my doorbell was not getting enough power. I thought I would have to call an electrician, but you saved the day! The Nest Hello is working perfectly after bypassing the capacitor thingy. You are awesome. :)

[@richardprince4125]

Fabulous video! Thank you. So I purchased a Google Nest. My 11 year old home has two chimes. After installation the Hello light yellow meaning not enough power. I rang the doorbell once and the light turned blue! But, the first floor chime would barely ring and the second floor chime rang but had a loud buzz and hum. I’m sure I have a 16V, 10 VAC transformer but can’t find it. So I took your suggestion and on the chime that buzzed I twisted the transformer and front red wires together and PROBLEM SOLVED! First floor chime works fine and is loud and Nest Hello works fine! And instead of the upstairs chime, my google mini announces” there is a visitor at the front door!” Even better than a chime. Your videos are the best and saved me from trying to locate and replace the transformer with a 16V, 30 VAC one.

[@ughtentide]

Thanks for this. I could not get the Nest Hello to work with my old doorbell chime. The chime would just buzz really loudly. Tying together the two reds with a wire nut fixed my problem! I have a bunch of the small Google speakers, so I just put them all around the house, and it actually works better than the old chime now.

[@imQurnot]

Duh, you don't need a chime if you have Google home devices. This helped tremendously.

[@pr0zak69]

This fixed the problem I was having and saved me having to pay an electrician, thanks!

[@dagdernit572]

You are AWESOME! Just bought a Nest Doorbell and was having power issues. I cannot locate the transformer but your little trick worked perfectly and it's working =) Many thanks!!!

[@emmanueldelacruz5092]

Bypassed the chime, and it worked perfectly! Thanks, you’re awesome!

[@sellgooddeals-DIY]

Thank you for watching!

[@TheRealAfroRick]

A good solution. This will work pretty well for all the folks that are also fighting with intercom systems that want to use Nest Hellos as well. You can just upgrade the transformer and send the power to both the intercom as well as the Nest Hello.

[@NengVang2007]

Agreed

[@46fd04]

Very good video, thank you. I have a 16VAC transformer. Will be changing to a 24VAC transformer today prior to installing the Nest Hello. Also, I suggest moving the doorbell transformer to the electrical panel so it's easy to find. I knew where mine was because I've lived here for 27 years, and I have a note beside my panel telling me where the transformer is 😀

[@sellgooddeals-DIY]

Great! Also, a 16V30VA transformer will work for you as well.

[@alantan6786]

Thank you for your video. The service that I used was absolutely of no help and I was ready to give up when I ran across your video. I gave it a try and the Nest Hello is working without constantly crashing. Keep up the good work!1

[@NCPorkBBQ]

this video helped me the most. My Nest Hello didn't come with the chime connector so it was buzzing hard. This video showed me what to do while I wait for it to arrive. Thanks!!!

[@swill69]

The "power kit" is not just a capacitor. It is also a switch that the nest app uses to turn on and off the chime. There is a mode setting to turn the indoor chime off or on depending if you dont want to be disturbed by the doorbell. Personally i dont like the delay from pressing to bell to google mimi announcing the doorbell or the lag in the network for the push notification to your phone. I like the chime. The real solution is to get the 24 volt 40VA transformer and put in a resistor at the chime to drop the voltage to just the chime.

[@shauns6018]

no i don't think so. I installed mine without the chime adapter and the setting to turn off the inside chime still functions.

[@malinoisnation9392]

Shaun S yes but you can’t turn it on and off if not wired correctly.

[@nickemel981]

You are the still one that has been a great person and you have to do a great time

[@nickemel981]

The new version

[@dirtybeak9598]

thank for such an excelllent explaination...I been having issues with mine...will see how long it will last now that i made this change

[@zeeryos102]

Oh man THANK YOU! I was about to install a transformer. Problem fixed!

[@sellgooddeals-DIY]

Great job on getting your problem fixed. Thanks for watching!

[@davidc2072]

Thanks! Didn't know you could leave the chime disconnected! Our dogs go crazy whenever the doorbell rings, so this will be awesome. Notification is enough. Would be nice if you did one that shows the transformer swap including the actual wiring. All the videos I've seen so far, people point it out and say you'll have to swap them, but don't show exactly which wires to connect.

[@RedHuntsman]

My dog starts barking when I get the notification on the app even.

[@pegseppamaki9426]

Thanks, your information was what we needed to get our Nest Hello working very reliably.

[@sellgooddeals-DIY]

Thank you for watching!

[@alexandrubos2828]

Thank you this helped me if i can eliminate the chime while using the original doorbell wires

[@sellgooddeals-DIY]

Thanks for watching!

[@BryanLucas]

Thanks so much, that fixed the problem! With two Nest Home Hubs and our iPhones and Apple Watches there wasn't really any need for the chime anyway.

[@allanj4576]

I installed one in my fairly new home a few weeks ago with zero issues. So I bought one for my parents 25 yr old home and the problem I had was the door bell chime was cycling constantly but not at full power. I ended up bypassing the chime like you did but I'd like to get it working. I'm wondering if updating the chime and/or transformer would work, since my problem was a little different than yours.

[@Abbyroo82]

I tried installing a simplisafe doorbell camera and have a similar issue. It is 1950 house with a doorbell that hits 4 long tubes (like an organ) to chime. My doorbell just kept chiming and there was no visible power to the doorball face. I tried the chime connector and I was just the same - keeps chiming. I bought a new doorbell and it came with a transformer. Need to still investigate the wiring in the attic. Did you find a solution?

[@alexisjankowski3281]

Isn’t there a three “prong” (connection whatever thingie) transformer to get up to 24V? That might help with the voltage drop?

[@clarkeflippo9004]

This makes so much sense. Can’t wait to try this solution. Way less complicated than having to install a new transformer. Thanks!

[@StephenClark12]

I want the traditional indoor, wired chime to ring when someone comes to my house and rings the Nest Hello. I have the nest 'power connector' installed/connected to the wires from the wall, and then have the 'power connector' connected to my chime. When everything is connected, and you press the Nest Hello, the indoor chime does not work. Any thoughts as to why the chime is not working when someone presses the Nest Hello button outside? I have a 16Volt/10VAC transformer. Can I remove the Nest 'power connector' but instead of 'wire nutting' the two wires (from the wall) to bypass the chime, can I connect them directly to my chime as if it was an 'old school' or 'normal' doorbell? so the indoor chime will work when the Nest Hello button is pressed by a visitor?

[@jameswestley]

When you showed the 'second step' turning off the chime in the app I figured that might be good enough... It was! I would get no recording with the bell rang for 6 weeks. Now with the chime only turned is in the app it works normal again. I do have Google home and that's better than the chime anyway.

[@buff_n_lu]

This video saved my bacon! Thank You! 👊🏼 You gave an EXCELLENT presentation 👏🏼

[@sellgooddeals-DIY]

Glad it helped! Thank you for watching!

[@mtz9939]

Well done. It takes what it takes. Great job of making the video understandable. Very helpful.

[@sellgooddeals-DIY]

I appreciate that! Thanks for watching!

[@darrellsaturnbigfoot]

Thanks, simplicity is gold😀 I may end up bypassing the chime. Can you explain why my physical door bell only works for a couple of days then stops? I’ve had to replace the capacitor two times now. Thanks

[@JesseJamess]

Mine is doing that now, how did you replace the capacitor?

[@Its_Just_Glenn]

@@JesseJamess Did you fix your issue? Mine worked while installing then the physical chime inside our home does not work anymore.

[@gila7574]

An excellent solution that is well explained and works perfectly! Thank you

[@joyevelyn85]

Thanks for the video. This was very helpful. What I did different from you is I did not remove the connection with capacitor however, I did disable it in App and use Google Mini and it worked fine. Thanks.

[@omnimatty]

Thank you! Worked like a charm.

[@sellgooddeals-DIY]

Glad it helped! Thanks for watching!

[@rickjamieson6605]

there was some minor electrical activity causing some movement of door chime tappets but not enough to hit the chime bars. This happened every 10-20 seconds and if there there is no noise in house you can hear a faint buzz for 1-2 secs. I by-passed the chime and now I can enjoy real quiet times. I wasn't sure if I could do that until I saw your video. I have a google home so I really didn't need the chime. Google should be more clear about this. The buzz was driving me nuts when I was taking naps in the living room. Thanks!

[@3cap97]

Nice job of clarifying the basic electrical flows....however you did not mention wattage issues. We now have TWO NEST doorbells plus ONE "button" doorbell. The button rings the chime fine, but the NEST doorbells will not ring the chime (otherwise they work fine) So my understanding now is ---I need more WATTS (48) to power my total setup---thus a 48 WATT transformer. Is that right?

[@aaronm4962]

This was so helpful and I got mine working! Thanks! It was easy to follow and amazing! 👏

[@sellgooddeals-DIY]

Great job getting your Nest working. I appreciate the comment.

[@jonathanbrown6824]

This is great however you didn’t show the wire connection path. Do the wires from the ring go to the transformer first? I have a setup without a doorbell. I’m looking to install the door cam directly to a power source. What would you recommend and could you describe or provide a wire diagram or path. Thx!

[@bakaslim1022]

Cool video, we couldn't find the transformer in my house. Connected the front and transformer wire still didnt work. I then disconnected the rear wire as well and then it worked.

[@HsingSun]

I found my transformer in the closet, five feet away from the Chime.

[@t-money10]

Thank you for this, I had my unit working, then it shut off, I did what you said and now I have full power thanks again

[@dianemccabe9907]

I have 2 nest hello doorbells, is 24volts enough to run both? And will the mini tell you what door they are at?

[@angiek8894]

great video, saved us

[@HsingSun]

When I did the Chime testing on the working bench, both Nest Hello and standard door belt were working good. After I installed both at the actual locations, the Nest Hello sounds delay for five seconds as soon as I hit the button. Why and do you have any idea?

[@CONald_is_A_false_Prophet]

Hey there good video, so it's been about a year now since you posted this, any issues? I called Nest / Google tech support, they said it is not required to use the chime adapter BUT it is recommended to still use it even if you are bypassing the chime. They said something about it being a protector in case a spike in voltage which could potentially "burn" the "Hello" which I would say is essentially what a capacitor does. But others have said long term they have noticed issues by doing this..

[@sumsh6346]

So was having the buzzing issue with my chime, so I decided to bypass the chime as you explained in this video. Before I did, I tested my transformer (16V/10VA) and was getting 20V. I wired the two wires together but still wasn’t getting power at my Nest Hello. I tested the transformer again and it showed 0V. I figured a bad transformer was the issue all along, so picked up a new one (16V/30VA) and wired it up. At first, the Hello worked great, then it stopped. I checked my new transformer and am getting 0V again. Is my Hello killing my transformers?

[@TheDesawnb]

Get a plug in transformer 24va on amazon i have had my transformer for 4 years.

[@JesseJamess]

@@TheDesawnb you have a plug in transformer with the Nest?

[@jeroal85]

If I have 2 nest door bell, I want to bypass the chime, should I connect the 3 wires (front,trans,rear) together?

[@biodek]

I noticed that you have a three connector chime but only use the front so your bypass works for that. With this same question, what do you do if you have the back door as well using a nest hello?

[@markrobinson6593]

In the UK the standard doorbell uses a 8v transformer, so that is a problem.I purchased one with a 12-24v transformer. It had 4 connection points two for mains live and neutral and two for the door bell push. Fortunately the transformer and connectors were on a small pcb. I removed it and did a quick search for the wiring on the internet. I had to break a connection and solder a new pair of wires so that the 24v could power the nest hello chime and detect the bell push. Great the camera light came on and the hello chimed and app rang on the phone. But no ring from the bell! Going into the settings you have to turn on the indoor chime, but that still didn’t work. Looking a little further down there is a chime duration set at 1 second. Changing this to 6 seconds allowed the bell to carry on ringing! Result. If you are buying one of these I suggest you get an external transformer (24v) and a battery powered chime case. You will have to mount the transformer somewhere and there will be plenty of space inside the chime box for the nest chime.

[@LuisCastro0485]

Is a resistor required If I connect the Nest Hello directly to my 24V transformer?

[@raheenb]

Thanks....I just did this and so far so good. Super annoying my house that was built 6 years ago can't support both the chime and the doorbell reliably without modification. 😓

[@sellgooddeals-DIY]

Glad you got it working.

[@josephharris5176]

Thank you! This finally got me all fixed up

[@DAFye2008]

This solved the issue I was having. Thank you for sharing!

[@macexpert7247]

How to wire the "Chime" at the transformer? There is often not enough space inside the housing.

[@Arctic5fox]

I own this transformer model CH570201 .is it enough to power the nest doorbell?

[@greatnews5]

If you wanted to know what the circle white thing called 'power connector' that nest sends along with the doorbell. Go here 3:35

[@dinisteles8422]

My ringer box doesnt exist. I checked with a neighbor that has same model home and it seems it got condemned. They removed it and speckled the wall. I don’t see any voltage in my current doorbell. Any recommendations?

[@brianfink7620]

When I first installed my Nest Hello Doorbell, it was yellow, which supposedly indicated that there was not enough power. After trying different things to change the color to blue, I couldn't get it to work. I figured I would call an electrician the next day to make it work. The next day when I came home from work the light was blue. I set it up, and it worked for about a month. Never was able to get the chime to ring. Now there is no light on the Nest Hello. Did I short out the nest somehow?? Any suggestions?

[@Tchairdjian]

PS. I posted my review before I watched your video. It actually makes a lot of sense. I’m glad I watched it. I liked and subscribed. Thanks you for this detailed explanation. I learned something. Like you said I do have a couple of Google Home Minis around the house and I think having a chime is now probably very unnecessary and redundant. Plus forgot that I had also attached a chime extender years ago so I can hear the bell upstairs too. Under technical info in the Nest Hello App, it says my voltage is 16.4V but didn’t realize it would drop drastically when someone rings the doorbell. I will still have to probably change the transformer to a 24B. But that doesn’t explain why the notifications are so delayed and the app is not respecting my settings for curtailing them. Also the time it takes to respond to a doorbell with the slow process of unlocking the phone, opening the app and starting to talk to the person at the door. What’s the solution??

[@sellgooddeals-DIY]

Thank you for watching!

[@KRayxKodessA]

My Nest Hello recently started shutting off entirely. Worked nearly flawlessly for 2.5 years. It's been off for the past 2 days (colder weather in Canada, but nothing near the operating limitations), and just came back online again this morning (-1 celsius). The blue halo light and green status light will abruptly shut off when it's malfunctioning, and I cannot figure out why. I'm wondering now if it's a power/transformer issue? If anyone has thoughts, I'd be grateful to hear them --- Google has told me to just "buy a new one"... Thanks for the great video!

[@billycrowe4501]

If I upgrade to a 24v transformer, would it fry my chime if I use it with the doorbell?

[@sellgooddeals-DIY]

Use a 16V30VA transformer. You get one from Lowes Or Home Depot.

[@jonbe9]

my nest hello is not connected to my existing house doorbell - I have a dedicated x-former that only powers the nest hello. I've owned it for 7 months and the first 6 months no problems...in the last month, whenever the nest hello button is pushed, the power to the hello reboots. Apparently it's been a common issue from what I read on the google help site...and there's been no remedy posted. Please help. TIA.

[@bessygutierrez6671]

I just bought the nest doorbell, How can I installed the transformer? When I connect the wires the camara doesn’t work, I don’t have chime I want to use the nest mini as speaker

[@bazen8446]

Hello ..We are undergoing a deep freeze in Texas, suddenly hard wired Nest Hello has no power, checked the voltage at Step down transformer 18.5v and at the Nest Hello end about 16.9v, can you provide some insight - how should I trouble shoot this issue ...thanks & Regards.

[@bazen8446]

Today no sooner the temperature went above 35F the Nest Hello started functioning !!, wonder what the issue was - would you know if by any chance the battery within the hardwired Nest Hello - had role to play - should I charge it ?

[@joannac9194]

THANK YOI so much. You resolved a problem we couldn’t.

[@pardeepsanghera13]

Thanks for the informative video. I'm also going to bypass my electrical chime. I've seen conflicting info on the nest support forums saying that the chime connector module should be connected to the transformer as if it were the chime. In your video the chime connector is connected to the chime. Just wondering if you can clear that up.

[@StevenScholten]

sorry to bother you with a question. I have an old fashioned metal doorbell hooked up to a transformer. The Nest does work, but the old doorbell does not work. It only makes a continuous soft buzzing sound. Any suggestions? I have looked around but can not find an asnwer

[@sellgooddeals-DIY]

Did the chime work fine before the Nest was installed?

[@StevenScholten]

@@sellgooddeals-DIY yes perfectly. Now a constant buzzz

[@sellgooddeals-DIY]

Check settings to see if Camera Duration is set to off. If it is you need to check the wiring from the exterior wall to the Nest Hello. Make sure there isn't any missing insulation. The wires could be touching making a connection. Also, look at the mounting bracket, the wires could be making a connection if they are bare. While the Nest Hello is still connected straighten the wires out make sure they aren't touching. See if the chime is making the buzzing noise. If not the problem is the wires going to the doorbell. Probably happens when the doorbell is seated in the bracket. If you have missing insulation on the wires tape them with electrical tape.

[@StevenScholten]

@@sellgooddeals-DIY Thanks A LOT for helping out. I managed to get the bell working, well sort of. only a soft buzz. The constant buzzing still persists though. Tried everything you suggested. Get a second Nest mini. That will solve it I guess. Greets from The Netherlands.

[@DemnFire]

great video and explanation ! thx

[@sellgooddeals-DIY]

Thank you for watching!

[@amberleighpyatt8863]

Can you tell me how to get mine to stop ringing on its on? will this fix the problem?

[@wiscolifts66cd24]

Thanks for posting this video it fixed my issues!!

[@sellgooddeals-DIY]

They can sure be frustrating, great job getting it working. Thank you for watching!

[@hanneliediedericks3025]

Works as described.

[@enthai5497]

Is it possible to upgrade the capacitor?

[@sellgooddeals-DIY]

I'm sure it could be done but it would be hard to size it correctly.

[@martialcamara7121]

My transformer is 24V (10a) but when a measure, it shows 27/28v. Do you think its too much power for the hello without the chime?

[@LuisCastro0485]

Is a resistors required?

[@chutneykings3961]

Great video...it helped me.

[@sellgooddeals-DIY]

Glad it helped

[@BrentBrooks42]

Thank you, that fixed it and saved me some money!

[@baiebell1]

hello I like to know how to connect two nest hello on the same bell

[@mikewolf5367]

What happens if you leave everything wired and just turn off the chime in the app settings so the chime doesn’t ring? What does the voltage say then? Also, the yellow ring would indicate at setup that there isn’t enough voltage from the transformer if the transformer is below 16v sitting idle. You should demonstrate with a transformer below 16v.

[@JesseJamess]

I tried this but if I by pass the chime, and connect the nest directly to my transformer, it gets HOT really quick (transformer) and the nest doesn't even turn on. But if I plug the nest using a micro USB cable it turn on right away. Any thoughts? It was working fine at one point, now it won't turn on with the transformer. I even bought a 24 bolt one but nope. I would get same issue and a buzzing sound from my transformer. Then my regular doorbell wouldn't stop ringing. So I thought maybe I have the wires touching somewhere, so I bought new doorbell wiring and connected directly to test it out... And still transformer gets HOT and nest wont power on. 🙄

[@bridge297forseniors6]

Thank you for the information,just what I was looking for.

[@sellgooddeals-DIY]

Glad it helped. Thank you for watching!

[@mosurz1296]

I installed nest today it worked during the first time. Then suddenly stop working did I blew up the transformer? Do I need to replace it. Please help

[@doorsbh]

This was going to be the the smart doorbell best buy but not including a OEM power supply with it was a headache to all buyers paying more than $200. Mine stayed in the box for a month tell I found a suitable psu for it. Now after around 3 years it stopped working. I changed the psu to another one and it completely stopped working, no lights Nothing. I will go back to traditional doorbell camera better as my previous COMMAX system worked for around 15 years with issues.

[@stevens3085]

Camera goes offline constantly throughout the day, Unable to find the transformer after an exhausting search. Voltage at the doorbell was at 3 or 4 V, bypassed the chime now it is up to around 10 V. This seems to have reduced the offline incidents significantly. Can I connect the capacitor into the bypass somehow to increase or store additional voltage?

[@sellgooddeals-DIY]

I really hate to say it but you have to find that transformer. Your voltage is way too low to be able to run the Nest Hello. Have you looked behind the doorbell? What about in the attic next to the access? What state do you live and age of your house?

[@stevens3085]

@@sellgooddeals-DIY I live in Utah, the house is about 50 years old, access to the attic I can't fit through it's very small, nothing behind the doorbell, my next door neighbor had an electrician search for his they couldn't find it. Interesting if not possibly helpful side note. My hello would not turn blue on setup, called nest tech support and it told me to plug it into a phone charger, lit up blue right away. After disabling the chime I went from pretty much half the time the camera was offline to two or three times in 24 hours at around 2 minutes each time. This is an incredible step forward for my situation as far as I'm concerned, lol. I would like to chime though, would like to find the transformer just for my own personal sanity. Maybe I will eventually install a whole new setup.

[@stevens3085]

Forgot to mention, thanks for doing what you do it was helpful nonetheless. And I really appreciate you replying, thanks dude

[@sellgooddeals-DIY]

Sorry, I gave bad advice for Utah it shouldn't be in the attic or behind the chime. This is going to be a pain. I would turn breakers off and on one by one until you find the breaker that powers the doorbell. Then you can see what else is off as well that should narrow you down to 2 rooms that the transformer is installed in. Since back in the 70's they had lights and plugs on the same circuit. Typically they would install them in an unfinished utility room that has the furnace, washer/dryer and the electrical panel. The age of your house is borderline when they started attaching them to the panel/near the panel in a junction box. They also would install them on the side of an electrical box that has the single white lamp fixture in a utility room. However, you never know what they ended up doing. Hopefully, it didn't get covered by sheetrock. Good Luck!!

[@DonavanAja]

I never thought of disconnecting the the stupid chime.I have 5 google homes in my house so I will be more than notified !

[@juliom980]

This is a great viedo! Hope I would find it earlier.... I connected my hello directly to the chime with 110v. Seems that my apartment didn't have a transformer. Followed Nest intructions and with 110v nest got a green flashing led on top, and now that I bought a transformer it does no light up and just gets hot right on where the wires are connected.... Any suggestion that may help? Have I burnout it? =(

[@germgerm89]

I’ve had my nest doorbell for almost 2 years now and for the past month it would not connect. I only get the little green blinking light no matter what I try. I reset the doorbell via the reset button and also held the button down. I uninstalled and tried to reinstall the doorbell with no luck. I tried doing this bypass shown in the video with no luck as well. Has anyone had this same issue and have any insight?

[@razfarias283]

Im having the same issue. Did everything you said. When i connect the wifi the nest hello goes dark. Its very strange and i feel like google help is not helping at all. They just keep giving the run around. $230 bucks i feel has gone down the toilet.

[@MikeDMinor]

Do you tell how to setup the google home integration?

[@TheSeancassady]

My doorbell is just making this constant clicking sound at the box, is that a similar issue? Too much voltage?

[@roykim4413]

For me not enough

[@Vanpotheosis]

Mine at first didn't power up at all, so I followed wires around my basement for an hour, found _a_ transformer, and found that it was under-powered. So I bought a new one. When I went to install it I noticed that this transformer was for the upstairs apartment. Whoops. So, I finally found the correct transformer after another long search and discovered that this one is rated at the proper (recommended) voltage to supply power to the Nest. Instead of changing it I just checked the doorbell again. For some reason there was a blue light this time... It had been properly installed for over a week, didn't work at all, no power, and then when I looked at the transformer it somehow powered up and worked fine. For a while, anyway. After about 3 months of flawless operation the device, once again, will no longer power up. How is this possible? Is it a broken transformer? Is there a short somewhere else in the system? I have an ammeter and can check everything but so far I've found nothing is wrong with the wiring of the house.

[@sellgooddeals-DIY]

This is definitely bizarre. Unhook your Nest Hello and with your meter test the voltage of the two wires. Then locate your transformer and test the voltage of the two wire terminals. Tell the voltage of both of them.

[@kevinbreese5739]

Umm.. how do you access the transformer? I just have two wires coming out of a hole in my exterior wall, no idea how to get to the transformer.

[@aarondavid9763]

Mine was in the basement.

[@NaimeshPatelDeviravi]

Thanks, it's working great now

[@qasion]

Today I changed my transformer to a new one, after I wired it back, I went to the door bell and it was humming!? I disconnected the new transformer, any idea? The reason I changed my Transformer because my Nest Hello door bell stopped working.

[@almayarturo1]

Please help me, In our home, we don't have a CHIME, so hace to use a power supply, so what specification must be, I mean, I use the power supply fron Google Home Míni, but was wrong, so wich es the perfecto power supply for this???

[@CHARLIEBITESHARD]

Any ideas why my nest is making the chime ring and never stop?

[@drjones694]

can you do a video with 2 doorbell chimes for 2 story houses. We found out we have 2 chimes and the one down stairs is going off by itself and the upstairs that is connected to the Next Hello is working fine. i'm trying to now connect to the transformer but dont really know what to do if i have 2 doorbells and want both to ring when someone rings the doorbell. thank you !!!! great content Please Please do a video with nest hello with 2 doorbell chimes

[@sellgooddeals-DIY]

Sorry, I haven’t seen this situation before. So, I assume that they are both independent of each other? One does a front the other does a rear/side door? I would think it would be possible if you already have or can get two wires to each chime to connect them. You would have to get a 24V 40va Transformer. Actually thinking this through as I’m typing I thing it may draw too much power through the Nest Hello. This would likely cause premature failure. However, I may give it try to see what happens. I would never recommend doing it though.

[@drjones694]

Thanks for your reply. Been doing tons of research and your videos helped me so much better formulate my question. I called electricians and they had no clue what I was talking about Now I better understand I live in TX 2 story houses made the same are dime a dozen It appears we have 1 doorbell 2 chimes and a transformer I hearing I can buy a 24v transformer and then it should ring both via the transformer I have to order it so in the mean time I connected the nest hello sensor to the upstairs chime Disconnected the downstairs chime and used a wire nut to tie the grey and white together This stopped the buzzing and random chimes going off It sounds like if nest would let you buy an extra white connector I could connect it downstairs to kill the line when not in use like it does up stairs Thank you again for your videos and I hope this makes sense what I'm writing 1 more thing you have a video showing nest hello and a Google home mini. We have found having 5 Google speakers home hub minis and speaker you have no control which is the primary and which will ring as your doorbell if the camera doesn't see a face it just rings 1 not all Anyways if you get a chance run a 24v transformer 2 chimes and the nest doorbell and see what happens thanks again keep the great content coming

[@jasonlo8780]

What is the actual nest device connected to in this video?

[@sellgooddeals-DIY]

Nest Hello, Google Home Mini (Nest Mini).

[@jasonlo8780]

@@sellgooddeals-DIY thanks for the reply, on your video, I dont see any wires on the actual google hello , how is it turning on? Where is it getting its power from ?

[@kevinbreese5739]

Disconnected chime. Didn't work for me. Still glowing orange : / Strange tho, I took out google chime completely and left original doorbell wires disconnected (From T and 2 screws) and the Nest Hello had no power. And yes I double checked the breaker power was on. Hooked the original doorbell wires back up and then the hello had power again. (But still yellow light). So my doorbell wires don't have power thru them unless doorbell wires are connected. Either way, sounds like I do need an electrician. For the record, house was built in 2003, so not that old.

[@IH1940HAY]

Just to clarify, the transformer in the picture is connected to the doorbell and nothing else. What were the two red wires you twisted together? They made this way too complicated. Thanks

[@sellgooddeals-DIY]

Basically, I bypassed the chime so that the power doesn’t run to the chime. Now, the power from the transformer is just going to the Nest Hello. The two red wires were from the chime on terminals trans (transformer) and front. When I took them off from the terminals and wire nutted them together is how I bypassed the chime. Hope that helps.

[@djchino]

sellgooddeals DIY question sir, my box doesn’t show 2 red wires one is green connected to rear one red connected to trans and one white connected to front, common sense tells me then that the white and red are the ones I need to hook up together right? Just want to make sure and don’t short anything 😉

[@bamamike1013]

I’m getting 22.3 at the nest outdoor camera. Camera doesn’t light up. When I press door bell, the chime dings and then (electrical) hum likes it’s stuck. In other words I get a ding but no dong, no lights either. Happened after 2 back to back power outages.

[@garyr5358]

Wouldn’t it be easier to disable the chime in the app?