Send your Camera Image to your Phone & More! 800m+ Range?!

[@eqilibrius]

Your Connection Issues with the "Advanced" Antennas 📡 is due to the type of Antennas those are. They are called omnidirectional Antenna and send good high-quality signal in close range no matter there your receiver is placed. To get longer range you would have to get specific directional antennas. Those usually have a small plate which you have to aim in the direction of the other component of the wireless system to get long range coverage but only in that direction. My FPV knowledge comes in handy 😅. I would advise you to keep those "advanced antennas" attached because you will most probably only work in sub 100 meters anyways. Kind regards Willi

[@FrameVoyager]

Sigma 18-35mm with some kind of anamorphic adapter either 1.25x or 1.33x on the pocket 6k would be my guess lol 😏😏😏

[@carpetbomberz]

9:06 Fav pullquote: " You do get sound over the app which is really cool,... which is really cool,...which is really cool". Artistic use of the lack of mix-minus 👍👍 😃

[@AnotherCameraChannel]

A happy accident that happened during recording! 😂 I don’t know what I expected to happen but yeah it worked out quite well Thanks for watching Eric!

[@ekphotography]

How long is the battery life more or less wit those smaller batteries?

[@emodemosvideos]

I just bought the Accsoon Cineview HE and the video has a fluctuation at the edges of the objects. I tried three cameras and the problem was there. I tried a 7'' portable field monitor, an Ipad (with the app) and a 70'' TV connected to the receiver and the fluctuation still there. Of course in the big TV you can see it more. Do you have an idea why this happening?

[@RAPCOMEDIALLC]

I purchased mine from B&H can wait for it to get here.

[@danvavassori]

Does the big monitor on your left work on NPFs? Brand and model? Thanks

[@AnotherCameraChannel]

amzn.to/3iqIAyO USB-C No problem inside a studio but not very daylight viewable outside

[@williamfryar2864]

If I am wanting to go from a Ninja V to an iPad, do I even need a reveiver or do I only need the transmitter?

[@AnotherCameraChannel]

Great question! If you just want to use apps then just a transmitter is required 👍

[@marcusm808]

The mushroom antennas are for the 5ghz frequencies so I'm wondering if two of the antenna ports are for 2.4ghz and the other two are 5ghz and perhaps you put a mushroom in one each of the ports so you are harming some of the 2.4ghz capability. I don't know how to identify the antenna ports or if they are actually separate or if they are ganged together electronically inside the case.

[@AnotherCameraChannel]

Oh I never thought about them being ganged together, that could be a possibility. You’re right the order of the antennas goes 2.4ghz 5ghz 2.4ghz 5ghz In the test when the problem happened the mushroom antennas were put on only the 5ghz ports. It was strange that it didn’t work that time, because it’s never happened again and worked fine the next time 😅🤷‍♂️ Thanks for watching :)

[@marcusm808]

@@AnotherCameraChannel Another possibility is that the mushroom antennas, having dead spots out the top and bottom, were not aligned ideally. Do you also have the mushroom antennas on both the transmitter and receiver? Do you think you would recommend them now after further use? Thanks!

[@marcusm808]

@@AnotherCameraChannel and now I've thought of another thing. It looks like the Accsoon uses regular SMA ports while the Hollyland antennas may be reverse pin sockets so the connection may not be good or only connecting at the threads. I'm not 100% sure of this, but it may be possible that people need to get port adapters to turn the antennas into regular SMA with the protruding pin instead of the recessed pin.

[@AnotherCameraChannel]

@@marcusm808 the performance has been so good with the stock antennas that I haven’t had to try the Mushroom Antennas again. So I can’t really recommend trying them unless people have interference problems and want to try them as an alternative! And yes I did have them on both units. The stock antennas and mushrooms share the same design and the hole for the pin from the rx/tx units looks the same size.

[@JorgeDourado]

Hi, great content, this video its super handy, thanks for sharing! I also used an Accsoon but the old model, I use along with an iPad, but I have this problem, when shooting with the Blackmagic 6K at 25fps I get a 1080p 50fps on the transmitter! Also happens when shooting 30fps, it jumps to 60fps on the transmitter.This is a problem since the image gets laggy.. I tried to contact Accsoon but they say its a blackmagic problem over the HDMI signal, they said would be fixed on the next blackmagic update, nevertheless it didn’t and since than I update both camera and Accsoon a couple times on the way but the problem still follows. Do you have any problems when shooting with the P6K at 25fps or 30fps on the transmitter? Thanks!!!

[@alfonsojarago]

Weird. I'm getting way less latency on the app. And the B&H video titled "Accsoon ConeViee HE & Quad: Cost Effective and Beginner Friendly!" also shows less latency on the app than on the receiver.

[@AnotherCameraChannel]

Well that is super interesting 🤔 I wonder why there is a difference

[@AnotherCameraChannel]

Is there a way for you to count how many frames they are off by? and which speed mode are you using?

[@ekphotography]

I just got mine and I bought an Ipad 6 generation just for my clients to monitor bc from all the videos I have seen it seemed to work pretty great, but on my iPad there is a lot of LAG and kind of jittery even from 10 feet away? even on Speed setting over HD, is there something I am missing or an do to improve it?

[@Haeppy]

I can't win the competition anyway but I'd like to be proud of myself for noticing it's an anamorphic lens/adapter!

[@Gael_AG]

thanks for this crystal clear review

[@AnotherCameraChannel]

My pleasure! :)

[@gabriel-mckee]

Great video! If I might make a comment, though: it's too long, and its length is partly due to a lack of editing (e.g. repetition of the same content).

[@abelgeorge8346]

could you please show how to connect accsoon he transmitter to 4 receiver

[@AnotherCameraChannel]

All you would need it to connect all the smartphones/tablets to the same wifi via the Accsoon App. Or, if using the HE receivers, set them to the same Group on the physical wheels on the side :)

[@VickersDoorter]

This a super good review, going forward.

[@aldenweihly-workshop]

Nice share!

[@TVPALOTINA]

CAN YOU STREAM ON KZbin TOGETHER WITH FACEBOOK USING THE CELL PHONE AND THE PRISM LIVE APP?

[@CSAFilm]

It's look like Sirui 35mm anamorphic with adapter 1.25X

[@ekphotography]

I have been seeing people say they can monitor through an M1 Laptop, but I cannot for some reason... What's the trick?

[@AnotherCameraChannel]

M1’s can install and run iPhone/iPad apps natively, so after installing, open the app, connect to the Transmitters wifi, and it should work. Just follow the same steps as you would on the phone. 👍

[@ekphotography]

@@AnotherCameraChannel will try but I was trying just to open the app on my laptop first, M1 but it does not open... Are yo saying I have to first connect my transmitter to the app on the iPhone first then it should open up?

[@raybrophy1297]

Super Review

[@huydeptrai181297]

Sigma 18-35mm with some kind of anamorphic adapter either 1.25x or 1.33x on the pocket 6k… ahaha 😏

[@FrameVoyager]

Copycat!!! I'm taking you down with a copyright strike 😡😡😡

[@huydeptrai181297]

@@FrameVoyager not if i copystrike you first!!!!

[@JustPassingByBaby]

5GHz us better and intended for short distance anyways.

[@yourfriendsunny2345]

❤❤❤❤