Series or Parallel: What is better & How to calculate the output of your solar panels

[@stecybanda7098]

Watching from Zambia

[@SolarSolution]

Good to hear from you Stecy!

[@johanvanalphen-xj8fg]

Hey señor Solar, loopt ik toch zo tegen jouw video aan tijdens mijn zoektocht naar kennis. Mooi man. -Keniaanse Johan-

[@SolarSolution]

Haha hey kerel! Wat leuk om van je te horen!

[@alexvassilev9586]

Great job, mate. Love your videos. Keep on the good work! 🍺🍺🍺

[@SolarSolution]

Thanks Alex 👍

[@irrigacka]

Great work, well explained!!

[@SolarSolution]

Glad you liked it Caxito!

[@TendayisydneyNyaruviro]

Well explained that you

[@SolarSolution]

You're welcome!

[@ardehshir4590]

hi there, I have bought 4 solar panels 340w ,Max Current (Imp) 9.82A Max Voltage (Vmp) 34.6V Short Circuit Current (Isc) 10.51A Open Circuit Voltage (Voc) 42.5V Weight 18.7KG Dimension 1664x992x35mm Cell Technology Monocrystalline but I didn't parallel yet I need help before somethings goes wrong LOL, my system run by 48v do I need to do parallel them?

[@Bio-chemest]

I want to know whether that 216 can be connect to hybrid inviter at ac input

[@suleimanmuhammedhady1198]

I want to know series and parallel connection which is better for a hybrid inverter

[@SolarSolution]

Course trailer and Coupon Code: kzbin.info/www/bejne/jHzEkKx4ntpqaJo

[@wild_monte]

Really like the video and your explanation. Just have one question, shouldn't the system current be 13,889 since there's also a parallel connection (2x6,944)?

[@JaakJacobus]

The calculator can't process that information. It can only do parallel OR series. And yes, you have double both the total Amp. and Watt after calculating one of the series.

[@ScientistPrepper]

Good video. Thank you for making it.

[@SolarSolution]

Glad you liked it Dino!

[@TFitz]

Voltage x Current = Power

[@SolarSolution]

Haha that is correct, thanks!

[@joehebbo7047]

If my inverter is 8kw voc 370 (125~500) which one is right 370 or 500 the max voltage?

[@awa2827]

@awa2827 19 hours ago Hi thank you for your helpful videos. I have a question about my solar system. I had 12v solar system with 10-180 watts panels and 2 lead acid batteries 12v/200amp connected parallel. I have them about 5 years and last month I bought 2 lithium batteries 230 amp each. When I connected new batteries, my inverter would turn on and off automatically every few minutes when there is less or no load connected to the system. I have 5000 watts Giandel inverter. I thought my inverter had a problem so I bought another inverter. This time I bought a 24v 5000 watt inverter and switched my solar panels to series. And I still have the same problem. I searched online but could not find any helpful information. Will you please help me out with this issue? Thank you so much.

[@dwightdeubner9825]

Would it still work to have 6 modules in parallel an the tie the two in series

[@igorkvachun3572]

Yes 👍 ☀️⚡🔌💡

[@ShowemRight]

Should I be ok with 1 Poly Renegy 100 watt panel with 2 mono Renegy 100 w solar panel? I bought the Poly about 7 years ago, and the 2 mono panels 1 month ago, and we have 2 JJN 100 w mono panels arriving soon .

[@ochitijohn7907]

Perfectly does it mean series or parallel meaning 24volt system

[@davidkanm6072]

Good👍

[@SolarSolution]

Thanks David

[@brentfrank7012]

I’m shocked you didn’t discuss amps

[@SolarSolution]

P = V x I

[@danielteyehuago1633]

I'm here again

[@SolarSolution]

Hey Daniel!

[@RemjiusMiyaiodongo]

In terms of length of time .Which one lasts longer? Parallel or series ?Somebody answer please

[@hariprasath8504]

It's depend on design sir,maximum pannel we connect series type of connection.

[@niharranjandas6569]

দারুন

[@SolarSolution]

ধন্যবাদ নিহার। আমি খুশি আপনি ভিডিও উপভোগ করেছেন.

[@yusifsuleiman5502]

What happens if I connect 120v dc with 80v dc in parallel from solar panels

[@dieseldawg7132]

It won’t work right I already ask this question as well As you can damage your panels you need to have an equal amount of panels with equal specs

[@dieseldawg7132]

Quick question let’s say you had 9 panels but have to do 5 in series and then the 4 in serious and the tie them In parallel will that work out or do you have to have an even amount of panels?

[@JaakJacobus]

Even or odd numbers but always the same amount in both series. In your example the set of 5 would pump its energy into the set of 4. I guess you run the risk of being in the market for a new set of panels after frying the old ones.

[@dieseldawg7132]

@@JaakJacobus thank you that makes alot of sense !

[@mrDADtheSecond]

Each panel is almost 7 amps

[@gor4988]

What am I missing here ? In your series example of 6 panels, your multiplying both voltage and current to reach 216 volts at 1,500 watts Then adding an exact 6 series panels, in a parallel string adds only current not voltage, 216 volts but now at 3,000 watts output If both parallel strings gained v+a Couldn't you have 6x36=216 volts , 6x250=1,500watts Added to another string of 6 panels And then get 12x36=432 volts , 12x250=3,000 watts More power = 😁

[@ralphghawi5656]

I thought no one is gonna mention that :D

[@gor4988]

@@ralphghawi5656 Its been 2 months and your the first 🥉

[@fullelectricro]

Current is not measured in wats. The current is the same in one string. He doesn’t show the current. So 6x36=216 volts at 6.19 amps. Another string of six added in series will be 433 volts at the same 6.19 amps.

[@chriskennedy7534]

​@Full Electric Your right, my misunderstanding

[@Chuppe_g]

So pararrel connection is the best