Serta Adjustable Bases EXPLAINED by GoodBed.com

[@anneswan8879]

If you have a Serta Motion Perfect delivered and assembled at your house, be sure to ask that they adjust the leg height as they assemble. With a thick mattress, you nearly always want the lowest option - but the highest option is their default. I'm going to pay for a repair call to get them adjusted a couple of months later. I can't see how to do it safely myself. Would love a KZbin on that!

[@goodbed]

Hi Anne. That's a great consideration -- and thanks for mentioning that to our readers!

[@loesjevervloet3769]

I have a first generation,my remote quit and my bed is stuck up straight. Having a hard time getting a new remote. I have to get some kit to convert a remote.

[@Jlbm737]

Great review can you do a review on the new Serta motion renewal and say if you can feel the massage through a thick mattress

[@amedeosatti8545]

I am looking for an elecrical bed repaire

[@uconnapharm]

What are the different heights ( in inches ) that the adjustable legs can be set at ?

[@goodbed]

Hi there -- Thanks for your question. For each of the bases shown, the height shown in the video is the tallest possibility, and you can lower them in 2-3" increments from there (IIRC the legs consist of two 3" segments + one 2" segment that can be screwed together in any order or permutation). Both the Motion Essentials and Motion Perfect bases do have a zero clearance design, which means they can be used without legs at all, so that would be the lowest they can be (~8" lower than what is shown). Of course, most people would only remove the legs entirely if they were planning to put the base on a platform. I hope that's helpful.

[@jonihughey1352]

My remote suddenly stopped working. I can’t get the back off. 😣

[@brendawood6712]

How do you turn off light under bed. Thanks

[@cristinat5622]

How is the King Serta Motion Perfect IV Adjustable Base Lumbar support like?

[@goodbed]

Hi Cristina -- The version we tested here had head tilt feature, but not a lumbar support feature. That said, we have tested bases with a lumbar support flap that tilts up and pushes up into the mattress under your lumbar area and have found these to have a pronounced effect. Just be aware that a) most people won't generally want / need to activate the lumbar support when your hear or foot is elevated, and b) you will only want to use the lumbar support when you are on your back as it can actually be counter-productive from a spinal alignment standpoint when you are lying in other positions. I hope that's helpful.

[@benjohnson5378]

Hello I got a replacement remote for my serta bed it's the one with the zero Gravity button the other one got lost and the new one doesn't work, It looks exactly the same it just don't work, The buttons light up and that's all, Any ideas?

[@goodbed]

Hi Ben. The new remote needs to be paired to the base. There are instructions in the owner's manual on how to do that -- see page 13. www.serta.com/sites/ssb/serta.com/uploads/2019/MP4/Serta_MotionPerfect_Owner_Manual_V001_10.16.18_V2.pdf

[@saik0pod]

Are these the same bases that mattress firm rebrands and sells as their own?

[@goodbed]

Hi there -- Thanks for your question. Mattress Firm is not an adjustable base manufacturer, so any base they are selling under their own brand is certainly made by someone else. That said, I'm not familiar enough with their current "house brand" assortment to know who makes it or to compare it with these models. Sorry I can't be more helpful on this one.

[@davidseckman8604]

Does Serta still make the Motion Perfect base? I noticed it looks like both head and foot end each have dual actuators towards the outside. Is that how it's made? I'm looking for a base built like that.

[@goodbed]

Hi David -- Thanks for your question. AFAIK Serta has never actually manufactured their own adjustable bases. Typically, mattress brands will design the specifications for an adjustable base and the contract out the manufacturing to a 3rd party. Naturally, the manufacturing partners are subject to change over time, but the brand themselves (Serta in this case) is typically the company that stands behind the resulting product. As far as your question, I'm not sure I understand what you mean by "dual actuators towards the outside". Are you referring to a split base design whereby each side of the base can be independently raised and lowered? If so, this is typically achieved by purchasing two separate Twin XL bases (and mattresses) that can be placed side by side and will fit inside a king-size bed frame. The alternative is to purchase a special mattress with a split head (available from some manufacturers in queen, king, and cal king). I hope that's helpful.

[@Asi_de_bello]

Does anyone know if they sell risers for the adjustable legs?? I'm needing to raise it bout 6inches.

[@___David___Savian]

I was about to leave a comment saying that these adjustable beds were overpriced and don't buy them. Then, he said the prices of each and he shut my mouth up. That's what I get for assuming.

[@sanyukie4652]

Hello, thank you for the video. Was wondering would “Perfect Sleeper Elite Trelleburg II 11.5" Firm Mattress” work out well on this adjustable base?

[@goodbed]

Hi. That mattress is certainly safe to use on an adjustable base. While we have not tried that exact model on an adjustable base, our guess would be that it will have some small issues typical of firm mattresses -- you can expect some conformance issues, like lifting at the foot, and when you get out of the bed while it's in a "bent" position, it might try to pop back up in the middle. That's all common with firm mattresses that are lighter in weight. Those types of conformance issues usually get better as you use the mattress and break it in. Sometimes we see a lot of bunching of the quilt/top layer when bent, but this mattress does not have particularly deep quilting on top, so we would not expect any issues there. Hope that helps!

[@rhondacooper9164]

Is it a good base for heavier people?

[@dehab1]

Good review

[@goodbed]

Thanks for letting us know it was helpful for you, Barry!

[@paulapennachio3040]

The adjustable beds just seem really expensive to me

[@melissahernando2685]

totally worth the investment trust meee

[@MrTommytwotone]

Worth it .......must buy adjustable mattress as well

[@TerryTempleton2990]

Reverie got the hot shit lol

[@af1966]

OK but it is a purchase that you only make one time or maybe every 10 or 20 years. So it it not like it is a recurring expense like your mortgage or rent.

[@hiramturrubiate8580]

I need control for emotion perfect and leghs

[@keketayv1111]

Can't the last base fit inside on an existing bed frame?

[@goodbed]

Hi KeKe. By 'existing bed frame' are you talking about a piece of furniture? Then yes -- it can be used with a headboard/rails. You may need to order an adapter kit, depending on the furniture you have, and of course it is a good idea to measure since all furniture is a bit different.

[@CG-mj7kl]

This base is sold out in every size, so can you please recommend other bases with the wall hugger feature. I like the way this one splits in the middle rather than having the whole mattress slide one way or another. We are looking for a split king. Thanks.

[@goodbed]

Hi Celine. The ongoing shipping backups have impacted the mattress industry too.... Take a look at the Lineal base -- this is the model we use in all of our reviews to test mattresses, and it does have a wallhugger feature. It's available in both split king and split california king sizes: www.goodbed.com/o/m/saatva/ Hope that helps!

[@CG-mj7kl]

@@goodbed Ended up ordering a Leggett and Platt so hoping it works out. Reviews are good and the zero clearance may be nice as I may build a platform. Thanks fir your suggestion. Your videos are great!

[@ronscopes]

I need more information about Serta Motion Essentials 4 mattress base. 1) How many legs are on the King ? 2) How tall can you make the King legs ? 3) Can the King base be used on my 4 oak slats without the Serta provided legs ? 4) If so, do my slats have to start at the headboard and end of the foot edge of the bed ? 5) Do you have more dimensions and specs on the KING ? 6) Are there additional steps for the King ? 7) Are two twins screwed together for every King ? I have a solid one piece King mattress.

[@goodbed]

Hi Ron. Thanks for the questions. Unfortunately, we looked at the queen base, and don't have answers to hand specifically about the king model. I think your best be is to talk to a Serta dealer. The Serta website has a store locator where you can find a dealer near you www.serta.com/store-locator

[@af1966]

On the Motion Perfect, the end of the mattress where your feet are will be laying on top of the black pieces that the metal retainer bar attaches to. Isn't that bad for the underside of the mattress to always be laying on the two raised up black pieces?

[@goodbed]

Hi. Ah -- I see what you mean. Those two attachments aren't very big, and keep in mind that not much weight will be on that part of the mattress (just your feet). We haven't heard of this ever being an issue, but I can see where you might think it could be.

[@interestingg]

I bought the 900i with a 25cm mattress. I don’t like the height of it. If I did remove the 6inch legs will this be a problem? I have the 3inch leg which I can attach to the 6inch making 9inch. But the Manuel reads not to attach the 3inch alone. Any recommendations?

[@goodbed]

Hi there -- Thanks for your question. I would surmise that that the reason the manual states this is because the mechanical parts under the platform that elevate the mattress need a certain amount of clearance to be able to function. So that if you were to try to elevate the base with only 3" legs, these parts would hit the floor and the base would not be able to fully elevate. Worse yet, doing this could even damage the base and likely would void your warranty as well. That said, we would recommend calling the manufacturer to confirm this. It's possible they have an accessory to solve the problem. I hope that's helpful.

[@Nepthu]

I just bought the Motion Essentials, but now I'm wondering how much it weighs to move. It's supposed to be delivered in two weeks and I'm worried about it.

[@goodbed]

Hi. It's heavy. Best I could find is around 200 pounds total. However, it does come in pieces that need to be assembled, so you could move it piece by piece and put it together in the room you choose. Depending on where you ordered, setup might be included, or perhaps an option at an additional cost.

[@Nepthu]

@@goodbed Thanks for your advice. Setup is included, but I'm imagining the future since I may move in 2022.

[@leenickshramko1100]

Is it damaging to the mattress to have it being compressed and extended?

[@goodbed]

Hi Lee -- Thanks for your question. This depends entirely on the mattress. For some mattresses, bending them like this can be fatal, leaving damage that can not be repaired and a voided warranty. That said, many mattresses today are specifically designed to be used this way. But even for those mattresses, the degree to which they are adjustable base compatible is not as black or white as they'd like you to believe. For this reason, we test and rate adjustable base compatibility in each of our in-depth mattress reviews, so if this is an important criteria for you, I'd suggest checking out the products we've reviewed and rated highly on this front as a starting point. I hope that's helpful.

[@savenacakadavi3976]

Can anyone explain how to assemble the motor at the bottom

[@af1966]

I have seen KZbin videos on that.

[@cssamlau]

What kind of mattress works with adjustable beds?

[@goodbed]

Hi there. Thanks for the question. Most mattresses today will work on an adjustable base, and the product information will always tell you if they are compatible. Generally, a mattress that's all-foam will work, as well as hybrid (innerspring) mattresses that use pocketed coils. Any mattress that comes compressed and shipped in a box is going to be compatible. The ones you should question are older-style innerspring beds, particularly ones with a metal wire that runs along the edge of the bed. That metal cable isn't meant to bend, and the mattress will be ruined if you try to use it on an adjustable base. Here's a buyer's guide for adjustable bases that talks about which mattresses work best: www.goodbed.com/adjustable-beds/ Hope that's helpful!

[@robertajaffe9298]

With the motion essentials mattess , how long does the massage last?

[@goodbed]

Hi Roberta. For the Motion Essentials, it's just a button on the remote, which you can keep pressing to cycle through the options, including "off". The more expensive Motion Perfect has a timer for the massage setting so it can turn off automatically. Hope that's helpful.

[@karenwilliamson2776]

I'm interested in buying an adjustable base, I have a sleigh bed with both a headboard and a footboard. Will an adjustable base fit? Thank you.

[@goodbed]

Hi Karen. That is a really good question. But because furniture varies so much in its construction, it's hard to say how well it will fit out of the box. All of these adjustable bases do come with an adapter kit (or sell one as an accessory) to attach it to your headboard or bed frame. You might check out the Serta adjustable base owner manual to see if the type of headboard attachment that's included looks like it will work with the bed frame you have: www.serta.com/sites/ssb/serta.com/uploads/2019/MP4/Serta_MotionPerfect_Contour_ElitePlatinum_Manual_V003.pdf Hope that's helpful.

[@Jacqueline-hp4zd]

Can you put any kind of mattress with these adjustable bases??..which mattress is better for these kind of adjustable bases?..is memory foam better than coil spring mattress??

[@goodbed]

Hi there -- Thanks for your question. Any mattress that is compatible for use on an adjustable base (which is the majority of mattresses these days) would be compatible with these bases. If you are considering a spring mattress, it would just need to use pocketed coils instead of connected coils. Any all-foam mattress would be compatible to one degree or another. There is not a uniform best type of mattress for adjustable base compatibility though -- for example, some pocketed coil mattresses perform way better on our adj base compatibility tests than some all-foam mattresses -- which is why we make sure to evaluate this attribute in our mattress reviews. You can see which mattresses we've reviewed here: www.goodbed.com/expert-reviews/ I hope that's helpful

[@debbiereed8017]

Can you add just a head board to the motion perfect base and will it be sturdy?

[@goodbed]

Hi Debbie -- Thanks for your question. Most adjustable bases will have a place to attach either a headboard or bed frame to them. This would work in much the same way as you would attach a headboard to a conventional bed frame. The attachment is generally with 1-2 pretty sizable bolts on each side of the bed, so it should be pretty sturdy in such a case. That said, to be sure this base has this feature, I would recommend contacting the manufacturer first to confirm it with them. Sorry I can't be of more help on this one.

[@debbiereed8017]

I have the Serta motion perfect... it does come with the attachment... the delivery guys said not to put a headboard on because the flop forward... which if it was up against the wall I don’t see why that would be so... we have a king size... thank you!

[@goodbed]

@@debbiereed8017 Hmm, I'm not sure what to make of that advice. I could see how that could be an issue if it's just a single bolt on each side of the bed but if there are two bolts (one on top of each other) on each side of the bed then I would think that would be sufficient. Sorry I can't be of more help on this one.

[@beverlybriggs7114]

How will the adjustable base work with my current bed frame?

[@goodbed]

Hi Beverly. That is a really good question. But because furniture varies so much in its construction, it's hard to say how well it will fit out of the box. All of these adjustable bases do come with an adapter kit (or sell one as an accessory) to attach it to your headboard or bed frame. You might check out the Serta adjustable base owner manual to see if the type of headboard attachment that's included looks like it will work with the bed frame you have: www.serta.com/sites/ssb/serta.com/uploads/2019/MP4/Serta_MotionPerfect_Contour_ElitePlatinum_Manual_V003.pdf Hope that's helpful.

[@macyzarger3831]

Is the Serta Motion Slim adjustable base compatible with headboards?

[@goodbed]

Hi there -- Thanks for your question. I'm not 100% sure but I would be inclined to think you could. Headboard connections are pretty standard on many adjustable bases, and I can confirm that they're definitely available with both the Motion Essentials and Motion Perfect models -- included with the Motion Perfect and available as options for the Motion Essentials (www.serta.com/adjustable-foundations#compare-foundations). Sorry I can't be of more help on this one.

[@macyzarger3831]

What is missing on the motion slim that is included on motion essentials and motion perfect that enables a headboard attachment?

[@shonb6515]

Is there a phone app available. I lost the remote.

[@goodbed]

Hi Shon. Thanks for the question. I don't think it does -- it would need to have Bluetooth and I don't see that's a feature that's been added since our review. However, you can get a replacement remote. Contact Serta at 1-888-708-1466 I also see a lot of new replacement remotes available on eBay and also Amazon as well. So annoying to lose those little accessories -- any other time a wireless remote would be a plus, but if it were a wired one it would be harder to lose!

[@izu9596]

Hello Is the Essential IV more sturdy and durable compared to slim option? Looking to get a base, but the perfect seems too expensive. Please advise

[@goodbed]

Hi Izu. It's kind of a moot question because the Slim has been discontinued. Now, Serta sells just the Essentials and the Perfect. But the Essentials does come with a 20-year limited warranty from Serta, with the electronics covered for 5 years. Hope that's helpful!

[@izu9596]

@@goodbed thanks it helps. i will go with essentials IV as its more afforable than the perfect

[@elojunitox]

What is the max weight for all 3 bases? What type of warranties and what’s cover? And how good are they for adult activates like how strong will they hold up

[@goodbed]

Hi Jorge. There is a good comparison chart on the Serta website that includes features, weight limits and warranty info: www.serta.com/adjustable-foundations#compare-foundations In short, the "Essentials" has a limit of 650 and the "Perfect" is 850. As for adult activities, many couples enjoy adjustable bases since raising the head or foot of the bed can allow for different and more comfortable positions. A well-made supportive adjustable base will have no stability issues with typical use, which certainly includes sex. Hope that helps!

[@jackrabbit9389]

looks like a wide electronic recliner

[@khadijaganchi]

brackets for 3-ft Bircham headboard,

[@af1966]

?

[@margaretmcguire3241]

Thank u! I couldn't figure it out, then I checked under my bed... only to learn my cat unplugged my base unit... she's always unplugging something. I guess that's what happens when a female cat is called Guy.. A cat's revenge 🐈😑

[@goodbed]

LOL!! That is hysterical! Thanks for sharing and glad nothing is broken! Feels like there's a Johnny Cash song in that story somewhere! ;)

[@sparadial2432]

He's leaving out a lot of info.. weight capacity, leg adjustments,floor clearance

[@goodbed]

Hi Spara -- Thanks so much for your feedback. I sincerely appreciate it. Yes, this video aims to provide a higher-level overview of all 3 bases in the current Serta line-up, rather than a more in-depth look at each base, in order to help people understand the key functional differences between them. Nonetheless, it's helpful to know that you would have found those additional details useful in this video. We'll certainly consider that feedback in future videos that we do. Thanks again.

[@sparadial2432]

Everyone eventually ends up in an adjustable bed. DON'T BUY CHEAP BASES!! I sell them trust me

[@JustMe-kf3gu]

Spara Dial what is the best quality base ?? Thank you

[@monicaprescher3852]

@@JustMe-kf3gu to bad he never replied. I’d like to know as well.

[@summerfunrides]

If your going to comment than you need to elaborate

[@gregoryreddin1222]

Does the Serta Motion Slim model support installation of headboard brackets?

[@goodbed]

Hi Gregory. The Motion Slim is no longer in production. Now they have the Essentials and the Motion Perfect. The Motion Perfect comes with headboard brackets, while they are an option for the Essentials model. Hope that's helpful!

[@marcoperez4188]

Can you hook up your headboard to it? If so which model is it

[@goodbed]

Hi Marco -- Thanks for your question. It may depend on your headboard, but in general you should be able to, at least with the Motion Essentials and Motion Perfect models (www.serta.com/adjustable-foundations#compare-foundations), and possibly the Slim as well. I hope that's helpful.