What if my laptop is not on a domain? Should I write workgroup in the box provided for domain or keep it empty? And will I have to enter IP address of my laptop too? Like if share folder 'scans' is on laptop, will the path be '\\192.134.1.243\desktop\scans'?
@HPSupport5 жыл бұрын
+craccky thanks for reaching out! I understand that you need help in setting up scan to network folder. I'll do my best to assist you. Please follow the guidelines under this document to setup scan to network folder: bitly.com/2BLLXYn Let us know how it goes.
@emmz6703 Жыл бұрын
Same problem here..guidelines doesnt have the answers..
@Kubaaaaa41310 ай бұрын
@@emmz6703did you find the solution?
@MRFA_GAMING4 жыл бұрын
How to create an email to log into the HP laserjet enterprise m630 mfp printer system . Please help me
@HPSupport4 жыл бұрын
+muhamad ramdan Please refer this document to know about setting up scan to network folder: bit.ly/2GZO798
@timjoseph8874 жыл бұрын
Does this device do simple copying? I can't find a quick set for this.
@HPSupport4 жыл бұрын
+Tim Joseph - May I know the model and serial number of your printer?The instructions for finding the model and serial number can be found here: support.hp.com/in-en/document/c03770424 - May I know to which device you have connected your printer? (For ex: Desktop, notebook, iPhone, iPad, android phone etc? - If connected to computer may I know the operating system installed on it?
@timjoseph8874 жыл бұрын
@@HPSupport The model is a Flow 8500 FN and the SN is: 752711946tpwt
@timjoseph8874 жыл бұрын
@@HPSupport it’s not connected to computer
@aristopharma98584 жыл бұрын
The following conflicts were found: A Save to Network Folder Quick Set requires user credentials for write access. Control panel access to Save to Network Folder should require a network sign-in method.
@aristopharma98584 жыл бұрын
The following conflicts were found: A Save to Network Folder Quick Set requires user credentials for write access. Control panel access to Save to Network Folder should require a network sign-in method.
@HPSupport4 жыл бұрын
+Aristo Pharma Please refer this document to know about setting up scan to network folder: bit.ly/2uzJBva
@aristopharma98584 жыл бұрын
@@HPSupport Can I share the screen short with you Any Support mail id
@aristopharma98584 жыл бұрын
@@HPSupport The operation was completed successfully. The following conflicts were found: A Save to Network Folder Quick Set requires user credentials for write access. Control panel access to Save to Network Folder should require a network sign-in method.
@aristopharma98584 жыл бұрын
@@HPSupport Is that possible, Anybody can help on REMOTE or ANYDESK
@monthecharly64453 жыл бұрын
Hello. i have no internet. how to setup LaserJet 500 MFP M525 printer and Scanner using USB Cable?
@HPSupport3 жыл бұрын
+Monthe Charly Please refer this document to setup your printer: bit.ly/37sGLJ8
@umartariq23434 жыл бұрын
Hello Sir, Its not showing the degital send button just show information is there any solution for that or i can send you error screen shot?
@HPSupport4 жыл бұрын
+umar tariq Please refer this document to setup scan to network folder: bit.ly/2GZO798
@ahmedsholeh40734 жыл бұрын
my printer is HP Laserjet 500 Color MFP M575 [5275F9] I have tried to save to USB settings to scan the document by entering the printer's IP address in the browser but still cannot, please help me
@HPSupport4 жыл бұрын
+Ahmed Sholeh Please refer this document to setup scan to email feature: bit.ly/3c333AZ
@indiasbestadvisor49975 жыл бұрын
I m trying to connect my laserjet managed flow MFP M830m printer but not being connected Plz help me
@HPSupport5 жыл бұрын
+jmkd knowledge Please follow the guidelines under this document to fix this issue: bit.ly/2uzJBva
@ahmedsholeh40735 жыл бұрын
I have tried to save to USB settings to scan the document by entering the printer's IP address in the browser but still cannot please help, thank you
@HPSupport5 жыл бұрын
+Ahmed Sholeh May I know the model number of your printer so that we can check the details for you?
@ahmedsholeh40735 жыл бұрын
@@HPSupport HP Laserjet 500 Color MFP M575 [5275F9]
@jamescanales20045 жыл бұрын
hello, I have an question, I enter the browser but only information comes out
@HPSupport5 жыл бұрын
+James Canales thanks for reaching out! I understand that you are experiencing an issue in setting up save to network folder. I'll do my best to assist you. Please refer to the instructions under this document to fix this issue: bitly.com/2PURNQX Let us know how it goes.
@sanaullahkhan95674 жыл бұрын
what i can do...my management option is locked
@HPSupport4 жыл бұрын
+Sanaullah Khan Please refer to the instructions under this document to fix this issue: bit.ly/2GZO798
@hengboy81024 жыл бұрын
Hello admin when I start sand documents to a folder the network but it show “ the network folder path specified does not exist “ how to fix thank you 🙏
@HPSupport4 жыл бұрын
+Hello Everyone Please refer to the instructions under this document to fix this issue: bit.ly/2GZO798
@MrMJMTech6 жыл бұрын
What about on a macOS computer?
@HPSupport6 жыл бұрын
+MrMJMTech Please follow the guidelines in this document to fix this issue: bit.ly/2Jam1Hn
@tumim82717 жыл бұрын
whats causing this issue The following conflicts were found Current Save to Network Folder settings are in conflict. Go to the Save to Network Folder Setup page to view the conflicts and resolve them
@HPSupport7 жыл бұрын
+Tumi Matshai Please refer to this document: bit.ly/2BkW9Fu to know completely about save to network folder settings and configuration.
@hichamz295 жыл бұрын
@@HPSupport Hi in this link there is no document available, please can you indicate one for , thank you so much,
@landryfowedji98004 жыл бұрын
Dear hp i have tried but no succes it is always says thats the username and password are incorrect but , it doenst se the shared folder hp pro 700 mfp 775
@HPSupport4 жыл бұрын
+Landry Fowedji Please refer to the instructions under this document to fix this issue: bit.ly/3hsMUaz
@ahaks1204 жыл бұрын
I want to make a password free folder on network so all can scan access their files, But after following your instructions printer is asking for username and password after i click Start. Help please
@HPSupport4 жыл бұрын
+Haseeb Khan Please follow the guidelines under this document to fix this issue: bit.ly/2GZO798
@altafhsmytalent63855 жыл бұрын
GOOD EVENING Dear HP. how can I open the HP website to add an email?
@HPSupport5 жыл бұрын
+Altaf hussain May I know the model number of your printer and the exact issue you are experiencing on it so that we can check the details for you?
@veracrutcher89285 ай бұрын
Change payment information
@HPSupport5 ай бұрын
Hi there, thanks for contacting HP Global Social Media Support! Please contact our customer care team over the phone or chat for further assistance, as this issue requires Live conversation with you over phone or chat to isolate the issue and provide you instantly with appropriate solution or repair/replacement options available at your place as per the warranty. Please feel free to reach us on call/chat, please access this link to select your preferred country and language option to reach us. Global support link: - hp.care/6053l9Hwd Regards, HP Support
@kazmi51214727 жыл бұрын
I am facing problem of """""""Folder path not found""""""""" Both my laptop and Scanner HP 8500 Fnl are on same network and from Laptop in can Ping my printer through IP ''''' Device are communicating I can access my scanner through on Laptop Web Page using scanner IP Address. When I create Quick Set by completing all steps ( I Provide shared Folder compete Path e.g \\computer name or IP Address \ Shareholder complete path). When on Scanner i try to Save on Network Folder ......Message apear """"""""""" Share Folder Path not found""""""' How to resolve it any one can guide please.
@HPSupport7 жыл бұрын
+Syed Saqib I understand the folder is not found on your laptop while scanning. I'm glad to hear thatyou're able to ping the IP address and you're able to communicate to the latop. Try connecting the printer to your network manually so that the HP installer can find the printer. Use the Wireless Setup Wizard if you have a touch or text-based control panel. Please try the following document to troubleshoot further: bit.ly/2Bj2nWL and bit.ly/2BhBr9x