Set your table saw free || DIY Mobile Base

Most table saw mobile bases suck. Or so I thought until I did some googling and found some pretty cool DIY builds out there. So I thought I'd try to build one myself...
*As an Amazon Associate, I may earn commissions from sales generated from the following links*
4 Pack Leveling Casters - amzn.to/43bQtdU
Fisch Chrome Vanadium Wood Twist Drill Bits - amzn.to/3xJHN0b
Rubio Monocoat Oil Plus 2C, 350 ML, Pure - amzn.to/3GqJgwR
Festool Dust Extractor - amzn.to/3f42TQu
Festool Bluetooth Remote - amzn.to/3S2ewGl
Festool ETS EC 150/5 - amzn.to/3m6nO9K
Flush Cut Trim Saw- amzn.to/3mcOMMG
Freud SD206: 6" Pro Dado Set - amzn.to/3MopRjX

[@SpencleyDesignCo]

you had me laughing the whole way through this one jason! keep up the fantastic work and this channel is going places

[@JasonGrissom]

Your continued support is appreciated Eric! The kind words mean more than you know. 🙏

[@samanthatitze9243]

I was happy to see that not only did the saw and base survive but the marriage also survived 😅 PIVOT! Pivottt!

[@JasonGrissom]

Yeah. For a second I didn't know which one had a better chance of surviving. 🤣 Definitely had a little bit of "moving" Jason show up.

[@craighhg]

Your tools are spot on 😂

[@JasonGrissom]

🤣 Thanks Craig! I tried. I think my drill could use a little work but the impact...flawless. 🤣

[@craighhg]

@@JasonGrissom impact was spot on. Sounded just like a crappy dewalt 😂 team Green!!!

[@JasonGrissom]

It's funny you mention that. I use to think thats just how they all sounded until I used the Milwaukees at work and realized it was just my DeWalt. 😂 I will say when I hot my new DeWalt impact it sounds much better than my 9 year old one. Tell you what though...9 years old vs 4 months old. It still gets it done. Team Black and Yellow. (Unless team green is Festool, then screw team black and yellow 🤣🤣)

[@keek80]

Love those casters i have em on my mobile tablesaw/outfeed/assembly table

[@JasonGrissom]

Nice! Yeah I have another 2 boxes. Glad to hear you like em' cause the plan is to put them on my outfeed/assembly table as well. Again not AS much for moving but also leveling.

[@DudeSawdust]

Well done! surprisingly no one smashed a toe moving that saw

[@JasonGrissom]

Yeah...probably NOT the best way to do it. 🤣 i'm not really sure how else to do it though

[@DudeSawdust]

@@JasonGrissom it’s really simple, just have 4 offensive linemen lift from each corner and then you slide it under

[@JasonGrissom]

Hey now! That's a strategy that could work! I also have a buddy that's a strong man competitor...🤔🤣

[@tomfunk3053]

Awesome build. Overkill is underrated!

[@JasonGrissom]

Thanks Tom! It really is right? I just figured I really only wanted to do it once. Getting the table saw on the base was...not easy. So 1 time is enough for me.

[@coreydavoll7622]

Great video!!! Shop is looking great!

[@JasonGrissom]

Thanks man! A little more work to do here and there but it's a night and day difference. Feels so good to be out there now. Almost like a proper wood shop. 😂

[@DaJugnaut]

another solid video! love the quality of the video and audio, both improving with every video! the cuts to memes (like the office) feel natural lmao

[@JasonGrissom]

Thanks Juggy! Yeah this was shot with the new camera. I actually goofed up the audio for the 1st halfish of the video because I didn't adjust for the new cameras preamp. But yeah man. Appreciate you. The new lighting really made a big difference too I think.

[@SeanDPD]

Love the logical kNOT gate 😄

[@JasonGrissom]

You like that!? 😂 I thought it'd be a nice little easter egg for the people that knew what it was. Thanks for noticing!

[@SeanDPD]

@@JasonGrissom For sure! Perfect quick flash where if you know you know, and if you don't it doesn't get in the way. I imagine weekend woodworkers with backgrounds in software or hardware engineering are not super rare on YT so I'm sure I'm not the only one!

[@JasonGrissom]

Oh yeah! You're probably right about that. A lot of the skills are transferrable into woodworking. I was an E & I technician for a few years and have been a Controls system guy for the last 4ish years. I find the critical thinking and problem solbing skills you learn on the job really help in the shop at times.

[@SAUdustBuilds]

Ooooo Cedar! Mr. Money Bags

[@JasonGrissom]

Got my tax return back. 🤣

[@riba2233]

Trackless track saw... lol

[@JasonGrissom]

It'll have to do...for now... 😂 gotta stop spending all my money on hard ciders.

[@yuose2]

Hi Jason, I really like your channel, although the number of videos is small, each installment is interesting and useful! I am wondering if you'd like to review our 3x360° green laser level or show it in one of your project videos. If you have some point of interest or have any questions, please let me know how I can reach you. Hope to hear from you, thanks!😀

[@Robert-p4f]

Why didn't you take apart the saw and assemble on the base? My skin was crawling when it was on it's end, but the build is great and I'm tempted to do it for my delta now. Also, I love it when guys post their mistakes, it makes me feel normal. Oh, the sound effects are so money man, you don't even know it.

[@JasonGrissom]

I didn't do it that way on account of my lower than average IQ. 😂 That said the base has been working out well. Only thing I've considered implementing would be adjustable legs on the extension wing side.

[@G.I.JeffsWorkbench]

Overkill? No such thing. No overbuilt frame ever failed, at least when compared to an underbuilt frame - particularly when supporting the weight of a heavy shop tool. Overbuild on!

[@JasonGrissom]

Good point! In the end I'm happy with what I did because I still was lacking confidence when I was flipping it over with the Table Saw, I can't imagine how'd I been if I didn't add the extra supports. 😬

[@jackspeer2127]

For goodness sake, how many TONS does your saw weigh??

[@JasonGrissom]

😂 I've never put it on a scale but the internet puts it somewhere in the 400-500 pounds range.