Setting up a Basic KU Band Satellite System for Satellite TV

[@aeonhelendale8777]

Checking in before making my first system. I took your advice and bought a 39in dish, with a single output LNB like you showed. A mount and universal LNB to convert an DishHD satellite dish for my secondary experiment. And a GTMedia V9 Prime as they had a sale going on and it was only $40. Got two poles from people down the road who still had just the poles concreted in their yard after ditching Dish Network. Got RG6 cables from a house who no longer used them. Reusing some aluminum piping for the buried main wire to the house, and found a box full of DiSEqC switches for $1 each at a thrift store. So far I'm in $240 USD. Making this because we live in the Georgia mountains in the USA, and OTA tv signal sucks up here. Thank you for your help. I've watched so much from you and you've made yourself a good teacher. Two thumbs way way up!

[@NorthcoasterHobby]

Thanks so much, I’m glad to hear that you’re on your way with the new system. Sounds like it’s going well. Best wishes!

[@pony053]

Got he Amiko today.....super, that's all I can say!!! Now playing thru out the house......Thank you for all your help!!! I friend in Boulder bought one today as well.

[@NorthcoasterHobby]

Great to hear, best wishes with it. kzbin.info/aero/PLDX6gLCL4WMzwD6o3jf7SjrLByiL2VlU3

[@Nicholas_Chris]

Lucky I know your channel. I recommended your videos to some of my friends who are interested in Free Satellite reception. If only you made your channel back in 2017 when I got into this hobby, would have made it easier.

[@mikeh.9266]

Here I write @ the 3:00 minute mark, and that's part of why I'm watching. Also, buying a complete system, seems to cost more, then piecing together my own. Ok, I'm continuing watching. Thanks for sharing all the great info!

[@alocin110]

Your video was very informative, professionally presented, very nice loud and clear commentary, visuals, and comparisons. It is really one of the best video I watched on the topic. Keep up the good work. I liked your channel and thank you very much for sharing.

[@NorthcoasterHobby]

Thank you very much for watching, and for the kind comments!📡

[@Nicholas_Chris]

RG59 cable is good for RCA or SPDIF coaxial audio. RG6 cable is best for TV, Radio, Satellite and internet.

[@TechUniversity1]

Great vid and exactly what I needed, thanks again for the help on FB!

[@NorthcoasterHobby]

You’re welcome! Thanks for watching!📡

[@pony053]

I can get a few transponders on SES3 to lock, but 12,145 is a moot issue...wanna makes sure I can get it before I buy a receiver! great tutorials btw!

[@NorthcoasterHobby]

I find that one easier to lock than the NBC channels. Thanks for watching and for the kind comments!

[@be236]

I'm moving into a new place and need to re-set-up my FTA dish.. hopefully I can remember how to do it (eg the aiming of the dish, as even 97W is so particular you have to aim it perfectly to get all the channels, as in the past I got a few channels on it with good signal, but can't pick up other channels on it.. go figure)...

[@NorthcoasterHobby]

How to Aim a KU Band Satellite Dish - Quick Tutorial - Aim a Satellite Dish kzbin.info/www/bejne/rabSm56fjt-dppo

[@JVanHarlinger]

Would using the dish from an old satellite TV setup with a proper LND work for free channels?

[@redneckbryon]

Some privately owned computer stores do sell FTA satellite equipment.

[@redneckbryon]

I'm also in Ontario Canada, so I know what you mean when it comes to the pricing, of these different items.

[@zandig666]

Great info sir !!!! 😉 📶📶🍻

[@NorthcoasterHobby]

@@zandig666 👍

[@victoryfirst2878]

What is better than RG6 cable that has a steel coated center conductor??? I found all copper construction for a good price and would like to use that instead. But I have been reading that you can purchase copper that is silver plated for even better picture quality. What would you recommend me to use ??? Thanks

[@NorthcoasterHobby]

I think copper centre is best, but most new RG6 cable will work fine. RG6 Quad shield is a good choice to prevent signal loss on long cable runs. Stay away from RG59 cable.

[@victoryfirst2878]

@@NorthcoasterHobby I will take your advice Sir. Would using RG11 give better results ??? Good information for someone checking out the site.

[@NorthcoasterHobby]

@@victoryfirst2878 RG11 is expensive and not necessary in most cases. RG6 is usually more than sufficient.

[@victoryfirst2878]

@@NorthcoasterHobby Then RG6 is the ticket for the coaxial cable.

[@ericmundsinger6]

Great information ! I was one of the early subscribers to Dierctv back in the 90s when they were still part of USSB. I live in a condo and used to pick up Directv on my balcony. Can you still pickup the free signals with a southwest exposure ?

[@NorthcoasterHobby]

@@ericmundsinger6 Generally speaking yes, but it depends on what satellite you’re aiming at. Thanks for watching!

[@davidkurzdorfer6402]

Another great video educationally to thanks for great knowledge

[@NorthcoasterHobby]

Thank you for watching!

[@lacey397]

I have the Satellite Dish with the dish mover and I have the hot lmb if it was still good..I don't have the receiver which one do you recommend....the lmb I have is older but it's hotter it pulls a signal better I have a lot of trees around me...it's about 10 years old will be good

[@NorthcoasterHobby]

I really like the Amiko receiver

[@NorthcoasterHobby]

kzbin.info/www/bejne/eoLCmmeqn6uAmcU

[@NorthcoasterHobby]

kzbin.info/www/bejne/fZKsiIVoaph1ipY

[@pongusikya]

Really helpful. Thanks!

[@smartbox6592]

Hi Bro. Can I know what is the advantage of using High Gain LNB? Does using this High Gain LNB : a. increase the chance of getting stronger signal quality b. capturing more channels c. or able to capture outside beam footing Your help and expertise are highly appreciated.

[@NorthcoasterHobby]

I’ve only used the LNBs you see in the video. I am able to capture all channels I’d expect to receive on a given satellite. ‘High Gain’ sounds like a marketing ploy, like ‘HD Digital TV Antenna’. These ones I have get the job done just fine. Thanks for watching! 📡

[@smartbox6592]

@@NorthcoasterHobby Thanks Bro.

[@NorthcoasterHobby]

@@smartbox6592 You’re welcome.

[@newstarcadefan]

@@NorthcoasterHobby Actually that is sage advice for people like myself who live in apartment and having a dish is a no-go, and for people who want a dish, and should not get suckered into the gimmicks of marketing. I know when my mom was a kid, they did the same when TV went from black and white to color...when a common antenna was all that was needed.

[@Nicholas_Chris]

@@NorthcoasterHobby The secret is the LNB noise. The LNBs that have 0.1 Db noise figure has a better reception and is ideal for smaller dishes or weaker transponders (sometimes satellites out of footprint) than the ones that have 0.2 Db or 0.3 Db. I would recommend AMIKO and RT INVERTO LNBs.

[@Listersmate2]

I have a Dish Network & DirectTV dish....would those work for me?

[@NorthcoasterHobby]

Not likely. Those dishes have circular KU Band LNB’s. A linear KU Band LNB is required to receive FTA satellite channels. Thanks for watching!

[@Listersmate2]

@NorthcoasterHobby Well, I was planning on changing the LNBs on them. I guess I should have been more specific in my question. So if I did change the LNBs in them, would they work or are they too small in diameter?

[@NorthcoasterHobby]

@@Listersmate2 The DirecTV dish is probably bigger. Use the bigger dish. In this hobby bigger is always better. Installing a Replacement LNB on a Satellite Dish for Free Satellite TV kzbin.info/www/bejne/eJSko3yKlsh7m6c

[@reggieb3777]

I've been out of the game for many years. Been doing mostly streaming like many others. I'm interested in getting back. Will the Amiko receiver with programming work as of today ? No satellite shut down or signal interference from satellite companies ?

[@NorthcoasterHobby]

It works great for receiving channels free and in the clear. Across the whole arc. It’s what I use everyday!

[@reggieb3777]

@@NorthcoasterHobby Thank you. I just subscribed to your channel.

[@NorthcoasterHobby]

@@reggieb3777 Thank you very much!📡📡

[@pony053]

Obviously I have a magnetic disturbance about my house....cause compass/finders to falsly locate. I GOT IT...with 68% quality!!!! thanks!....My handheld GT media finder does not allow PID entry manually...so I need to order the real receiver, or am I missing something?

[@NorthcoasterHobby]

Glad to hear you locked it! I’ll check into the PID thing.👍📡

[@pony053]

@@NorthcoasterHobby On 12,145 I get WRAL FM and some little news service. I want to buy a "real" receiver but I want to make sure I can receive the channels I mentioned . The spectrum looks decent at that frequency. Perhaps this GT media box is not capable of pinpointing radio channels? I got 82 strength and 80 quality on this transponder. As you mentioned, this box isn't real user friendly.

[@NorthcoasterHobby]

@@pony053 I personally like the Amiko Mini HD265 receiver the best: Amiko Mini HD265 HEVC H.265 Free Satellite TV Receiver Overview kzbin.info/www/bejne/g6GrmqusmsyXac0

[@pony053]

Ordered Amiko receiver....I agree, best bang for my buck....Thanks for all your advise

[@NorthcoasterHobby]

@@pony053 Thanks for watching, best wishes.👍

[@boland1914]

I have 33 inch dish will it work in newfoundland How far can you run a coax length

[@NorthcoasterHobby]

A bigger dish is always better, but try that one out and see how it performs, since you already have it. As far as cable length, you should be able to run 100-150 feet of RG6 without problems, but you can always use an inline signal amplifier if needed: How well does a satellite amplifier signal booster work? kzbin.info/www/bejne/rofLfItugbOIqK8

[@be236]

So, getting ready to install my J-pole mount. If I can't get the pole end to be plumb, it should not matter, correct? Since I can adjust the elevation of the dish to compensate? For example, if my mount is not plump but slightly tilted up (eg it aims up towards the satellite), I can simply lower the elevation angle of my dish, right?

[@NorthcoasterHobby]

Yes, you will have a bit of wiggle room, but try to get the pole as plumb as possible. It makes it easier.

[@toddr2961]

Just curious...how do I know what channels I will receive?

[@NorthcoasterHobby]

These websites have a listing of radio and TV channels available on each satellite: www.lyngsat.com/america.html www.tvrosat.com/cgi-bin/portal_charts.cgi Keep in mind that channel availability can change without notice. That’s just part of the hobby.

[@toddr2961]

@@NorthcoasterHobby thanks! I appreciate it 🙏

[@NorthcoasterHobby]

@@toddr2961 You’re welcome.

[@BudFuddlacker]

Ate the best receiver to get in June 2024?

[@NorthcoasterHobby]

Amiko Mini HD265 HEVC H.265 Satellite TV Receiver Overview kzbin.info/www/bejne/g6GrmqusmsyXac0

[@NorthcoasterHobby]

Amiko Satellite Receiver Tutorials kzbin.info/aero/PLDX6gLCL4WMzwD6o3jf7SjrLByiL2VlU3

[@donmiller8232]

Can I use a dish satellite.

[@NorthcoasterHobby]

Generally no, unless you change the LNB. Can you use a DirecTV, Dish Network or Bell subscription receiver for free-to-air FTA satellite TV? kzbin.info/www/bejne/n56Zi4JpftellaM

[@NorthcoasterHobby]

Installing a Replacement LNB on a Satellite Dish for Free Satellite TV kzbin.info/www/bejne/eJSko3yKlsh7m6c

[@josephduquette1108]

Aim having problems with my ku band I have no signal at the box gt media 8x combo

[@NorthcoasterHobby]

Make sure you set the LNB frequency correctly in the receiver menu: kzbin.info/www/bejne/Z4bQc4eqd71pprc Also, you may have to adjust the aim of your dish: kzbin.info/www/bejne/rabSm56fjt-dppo Adjust it in small increments. Run a Blindscan after every adjustment.

[@VEG6]

Don't you use H-H motors in America, still waiting to hear it...

[@NorthcoasterHobby]

I have a motorized KU Band dish: Free TV Channels on Satellite 117 W. KU band with a Motorized Dish kzbin.info/www/bejne/pZbEdJlvaK9gqsk Comparing Motorized and Stationary KU Band Satellite Dishes kzbin.info/www/bejne/ranYdImPfK90hNk

[@VEG6]

​@@NorthcoasterHobby I'm really surprised how many less channels (and satellites) are in America, in Europe is just full. It's a hobby for me as well but on the other side of the globe, good video :)

[@WiSeNhEiMeR-1369]

HOWdy N-C-H, ... Thanks COOP the WiSeNhEiMeR from Richmond, INDIANA ...

[@mikepro9343]

i live in PA what would be the best satellite for me

[@NorthcoasterHobby]

125 West KU has PBS channels, so does 87 west. 103 has NBC and COZI TV. If you’re looking for American channels I’d suggest these.

[@NorthcoasterHobby]

kzbin.info/www/bejne/eH2rc4CJi96emrM

[@NorthcoasterHobby]

kzbin.info/www/bejne/a3SqeYqoZsRngc0

[@ida_lazuardi]

Mantab, Bro. Salam kenal dari Indonesia.

[@NorthcoasterHobby]

Terima kasih banyak telah menonton!

[@ida_lazuardi]

@@NorthcoasterHobby 👍

[@salmack8842]

Great video. Could you please send me a link to hook up my Orby TV Satellite system? I would like to convert it as cheap as possible. Thank you.

[@NorthcoasterHobby]

Thanks for watching my video. The best thing to do is have a look at my channel. I’ve got lots of videos on dish and receiver setup. kzbin.info/www/bejne/p3Oyh6CPfaZ6jcU

[@biswajitmondal5892]

👍

[@justinelliott3529]

I’d just use my lnr400 that I use for my ham radio

[@josephduquette1108]

I need sum help with it

[@NorthcoasterHobby]

What do you have a question about?

[@Capturing-Memories]

There isn't any free north American channels, Immigrants have some international channels like Arabic, Persian, Asian channels and there is some satellites with very few free Spanish channels. So if you are looking for English channels don't waste your time and money.

[@NorthcoasterHobby]

Satellite TV channel Scans kzbin.info/aero/PLDX6gLCL4WMwwD7Wfp_RyLqSRAMwkU5BD

[@Dave102693]

Is this even legal?

[@NorthcoasterHobby]

Yes.

[@MrBlackbutang]

Keeping an 👁on Russia

[@guythejedi]

$130 for dish, $22 for LNB, $85 for receivers not so FREE Satellite TV is it.

[@NorthcoasterHobby]

That’s about 2 months of cable. Once you buy the equipment, no monthly fees. The programming is free. Did you really expect the equipment to be free?

[@NorthcoasterHobby]

kzbin.info/www/bejne/bl7dnKavqdCqd7M

[@sammyrust5128]

Nobody ever talks about the kind of programming you can recieve on FTA. Northcoaster Hobby could you steer me to where I could see what kind of programming before I get into it. Thanks

[@NorthcoasterHobby]

kzbin.info/aero/PLDX6gLCL4WMwwD7Wfp_RyLqSRAMwkU5BD www.lyngsat.com/america.html www.tvrosat.com/cgi-bin/portal_charts.cgi

[@sammyrust5128]

@Northcoasterhobby thanks for the reply

[@waynejasinski6111]

​@@NorthcoasterHobby9N317