Setup time and hold time | Metastability condition | Explained.

  Рет қаралды 12,475

Karthik Vippala

Karthik Vippala

4 жыл бұрын

Setup time and hold time and metastability explained , if you have any doubts please feel free to comment down , below ,I WILL ANSWER WITHIN 24HRS.

Пікірлер: 19
@KarthikVippala
@KarthikVippala 4 жыл бұрын
If you have any doubts please feel free to comment below , I WILL ANSWER YOUR DOUBTS WITHIN 24 HRS. Thanks for watching , PLEASE DO SUBSCRIBE , IT WILL HELP , ME A LOT.
@reddychowrasta6003
@reddychowrasta6003 3 жыл бұрын
Could you please tell me how we can reduce the nagative slack when we deal with setup and hold time voilations?
@hagarhossam4211
@hagarhossam4211 4 жыл бұрын
thanks a lot
@KarthikVippala
@KarthikVippala 4 жыл бұрын
Your welcome 👍
@hglrku098
@hglrku098 4 жыл бұрын
Thanks for the nice laid symbols on the timing diagram. It really helped.
@KarthikVippala
@KarthikVippala 4 жыл бұрын
Thank you Parker for your valuable feedback 👍
@leninroyyaemineni1134
@leninroyyaemineni1134 3 жыл бұрын
Metastbility means that first flop output might goes to 0 or 1.To remove metastbility we use different synchronises My question is what if the metastable output is not as the expected output.There will be data corruption, right? How to overcome that?
@smritigupta554
@smritigupta554 4 ай бұрын
I have the same doubt
@manugupta5500
@manugupta5500 2 жыл бұрын
try to share these notes as well.
@KarthikVippala
@KarthikVippala 2 жыл бұрын
Sure
@vinaygattu3217
@vinaygattu3217 4 жыл бұрын
during the setup time or hold time if data changes to 0/1 the flip flop goes to metastable state ...is it right?...then how we will overcome this problem..
@KarthikVippala
@KarthikVippala 4 жыл бұрын
Hey Vinay , thanks for asking the question. To overcome Metastability problem we will use two flop synchronizers , with use of flop synchronizers we will get stable output.
@KarthikVippala
@KarthikVippala 4 жыл бұрын
kzbin.info/www/bejne/iIjLZqaBnKaooJI Check this video where I have explained about two flop synchronizers. Thanks for asking.
@keertichannaraddi6973
@keertichannaraddi6973 4 жыл бұрын
Please don't add background music. It's very distracting. Thank you
@KarthikVippala
@KarthikVippala 4 жыл бұрын
Thanks for your feedback , sure I will not add from now👍
@jancydas5569
@jancydas5569 3 жыл бұрын
Background music overriddes lecture..can't hear properly
@KarthikVippala
@KarthikVippala 3 жыл бұрын
Jancy , thanks for the input , I will improve on it , good luck, good health 👍😊
@farhanmajeed126
@farhanmajeed126 4 жыл бұрын
Music ka kiya tuk bnta ha.... Sari video ka satyanas kr diya....
@KarthikVippala
@KarthikVippala 4 жыл бұрын
Ok bro I Will remove the music today👍
Handshake based pulse synchronizer Explained!!
8:40
Karthik Vippala
Рет қаралды 14 М.
Why a flip flop have setup time and hold time? Explained!
11:44
Karthik Vippala
Рет қаралды 21 М.
1 or 2?🐄
00:12
Kan Andrey
Рет қаралды 58 МЛН
Этот Пёс Кое-Что Наделал 😳
00:31
Глеб Рандалайнен
Рет қаралды 4,2 МЛН
Setup Time and Hold Time of Flip Flop Explained | Digital Electronics
17:37
ALL ABOUT ELECTRONICS
Рет қаралды 73 М.
VLSI | Setup Time | Hold Time | Static Timing Analysis (STA) | Digital IC Designs
12:29
Lecture 24: Digital Electronics: Metastability
11:46
Robin Garg
Рет қаралды 1,8 М.
How to Add Octal Numbers
3:06
Solo Udensi
Рет қаралды 397