SHARPEN Your Scraper Like a PRO in a few SECONDS!

This video is about using and sharpening best scraper I ever had. This tool really saved me a lot of time and money. It gives excellent results quickly for cheap
Workbench:
• Monumental MONSTER WOR...
Free PDF workbench plans:
drive.google.c...
More free plans I ever made:
drive.google.c...
Thanks for watching and hope this video was helpful.
GRINwood shop:
www.etsy.com/s...
Follow GRINwood:
/ grinwoodprojects
/ dakhnogregory
/ grinwooddesigns
/ grinwooddesigns
Music:
Parasail - Silent Partner
#woodworking #diy #GRINwoodtools .
Would you like to use my videos in your media projects?
Please contact me: [e-mail]

[@WoodfulProjects]

That has to be one of the easiest method with a perfect final result. Worths a try.

[@MalenyFieldsForever]

I made one of these after the original video and was impressed with how well it worked. Now I'm more impressed with how easy it is to maintain 👍

[@skippylippy547]

Maleny - What did you use for a blade? I'm interested in making this tool after seeing the results. Thank you.

[@MalenyFieldsForever]

@@skippylippy547 I used a regular utility knife cartridge.

[@ГадикПетрович-х6ш]

Impressed by the simplicity of the idea!!! All the best to the master!

[@Bob_Adkins]

I like the way the handle keeps it from bending. Some KZbinrs actually bend the scraper as they push it to make it cut better, but that can make the board concave. I will try it!

[@ThéoLRDS]

I like the way you made it rigid, i think that's another reason you get such good shavings. Thanks for the idea.

[@MarkMcCluney]

Gosh, that's genuinely impressive. Thanks for showing us.

[@albertklassen6055]

That’s amazing. I like the handle. Keeps it from bending.

[@constantinosschinas4503]

I had always used these blades as scrapers, without a base, changing them when needed. Will try sharpening!

[@frankcornfield5915]

Great video with no wasted time advertising.

[@acerjuglans383]

Very impressive. Always looking forward to your videos.

[@n0lsk1]

wow that is legitimately brilliant!

[@1deerndingo]

Thank you for that. An interesting, informative, entertaining video again.

[@rawr2u190]

Oh elegant solution

[@raymondjackson-h3u]

Thats beautiful

[@raymondjackson-h3u]

That's the best I've seen 40 years a carpenter wish I had it years ago have used many nice to sharpen 👍

[@raymondjackson-h3u]

​@@PBob-le4qcof course I knew what it was I was making comparison between this version and traditional cabinet scrapers which are alot harder to sharpen

[@clivelekas2822]

Wel done. Easy and very simple but with superb results. And vey safe and healthy?

[@GRINwood]

Yes, thanks for asking

[@jasondoust4935]

Just shared this with three Furniture Making teachers who admired this tool in the previous vid, FYI. Beautiful stuff! Thank you.

[@andreyyurko1439]

the best of the best scraper ever - a piece of window glass

[@coppulor6500]

seriously?

[@harirahmat3797]

​@@coppulor6500 Yes

[@coppulor6500]

Wow. I gotta give that a shot. Thank you!

[@MCsCreations]

Wow! 😮 Fantastic, Gregory! Do you have a video showing how you made the holder? I don't remember it! Anyway, stay safe there with your family! 🖖😊

[@GRINwood]

Yes, I have that video, here is it: kzbin.info/www/bejne/lZ7cYaZtbc13oq8 Thanks for watching 👍

[@MCsCreations]

@@GRINwood Sweet, thank you! 😊

[@zorank.3124]

​@@MCsCreationsRealy! You realy need a video for that ?

[@coppulor6500]

@@zorank.3124 newbs like me appreciate it.

[@MG-vo7is]

Very cool. I want to try this.

[@rodpotts2666]

Wow! thats great.

[@hunglikeahamster]

Thank you. I will try this myself

[@Gus0046]

Excelente muy útil. Buen trabajo te felicito amigo 👏👏😉

[@rafezetter8003]

I made this a few days ago and it;s already working a treat for things that would have been awkward otherwise - I don't know if you did this but I made a small recess for the blade to sit in, 1/2 the bald thickness depth so it was really held firmly and stopped at one end so it cant really slide, though TBH it's really held tight.

[@DClaville]

this is fantastic

[@ehRalph]

Years ago I gave away a set of 15” straight knife planer blades when I upgraded to helical. Looking back😢 those blades could have made excellent scraping tools.

[@PetroHnatyshyn]

Вподобайка із перших секунд.Супер!!!!

[@GRINwood]

Дякую

[@Vladimir_Yarich]

Шикарная цыкля👍👍👍

[@pinballrobbie]

Really good on veneers.

[@DmytroDovzhenko]

Дуже корисне відео! Дякую 👍🏼

[@joachimstritzelberger7958]

perfect idea!

[@GRINwood]

Thanks

[@CreationNOY80]

A great job, thank you very much !❤

[@jimrosson6702]

Great video thanks for sharing

[@gpanizzolo6090]

Bueno, tendré que probarlo. Es muy interesante. Tengo una pregunta: usas una hoja de trincheta para eso? Gracias! Abrazo! Germán.

[@GRINwood]

Hello, I use 18mm snap off blades. Thanks

[@gpanizzolo6090]

@@GRINwood Gracias!

[@scottcardais3560]

I thought I’d tried everything but this technique is new to me. I’m definitely going to try it. What is the blade? It looked like a long razor knife repurposed as a scraper blade.

[@GRINwood]

@@scottcardais3560 yes, you are right, it's 18mm knife blade

[@rcb1717]

Wonder how this would work on a book foredge ?

[@ph08nyx]

Super! Why not to use trapezoidal blade?

[@patterdalezipsuzilil]

You can buy pro scraper tazors 4inch 5 inch

[@СташенкоСергей]

Цикля из лезвия канцелярского ножа? Оригинально! Сколько времени занимает первичная заточка?

[@GRINwood]

Первичная ничем не отличается. 6-8 перекрёстных проходов по каждому камню и цикля готова к работе

[@ArnallWoodworks]

Brilliant

[@maximk2903]

Спасибо за отличный контент, подписался. Попробовал повторить, но у меня на выходе пока получается только пыль ). Такой красивой стружки пока не добился. Правда 8-тысячника у меня нет, может в этом дело, а может и заусенец не самый удачный получился.

[@СемёнСемёнов-д3э]

шикарный инструмент. где брали камни и алмазный брусок, с Алика?

[@qsdvb]

What angle do you hold this type of scaper at when scraping the wood? Is it 90 degrees?

[@МаксимПотапов-д4ш]

Дуже гарно,який матеріал для рукоятки використали і що за камінь тре 1000 і 8000?Дякую!

[@WilliamS-jm2hl]

Sir I made a holder for the blade, sharpened it as shown, but all I get is dust. I used an 18mm snap off blade. Any suggestions would be appreciated. Thank you.

[@romeancient3971]

🔥👍 nice

[@сергейагарков-м9п]

Спасибо.

[@petrsidlo7614]

This is awesome, but for the life of me I cannot get a shaving as nice as yours are. Granted, I use a 1000/6000 combination of stone, but that should not be that much difference, maybe I'm applying a wrong angle when sharpening, do you have any idea what might be the cause?

[@ChiefTiff]

I recognised the diamond stone as a generic "Made In China" available from Aliexpress/Banggood etc; but did the waterstones come from there as well? I'd be grateful for a link if possible.

[@GRINwood]

Yes, I purchased them on Aliexpress, but I don't remember where exactly, sorry.

[@xyzperic1462]

Bravo!!!

[@Jason-o5s]

Cheer~~~a tool or device used for scraping, especially for removing dirt, paint, ice, or other unwanted matter from a surface.(knife??)😅

[@HamedAdampara]

عالی بود 😊

[@Harry_Beanbag]

mind blown! now show me how to make the tool

[@ErickvdK]

Not exactly rocket science, me thinks...

[@NWMT]

I noticed you don’t seem to care which edge faces forward down the board you’re scraping? So there is no burr on the blade with this method? Or if there is, it doesn’t matter which edge to scrape with? 😊

[@andy_rb]

Did you not watch the video to the end?

[@GRINwood]

Yes, I show it in the video. Remember to sharpen the same side every time. And try to keep the same angle

[@NWMT]

@@GRINwood My mistake. I actually ended the video before the end! I will go back and watch. Love your stuff. Thanks.

[@NWMT]

Yes, about 2:20 left in the vid….burr info! Figures. I had just left the vid a moment before. I should have known your thoroughness would not leave out such a detail. 😊

[@markduggan3451]

That looks awesome, I must try to make one.

[@Upyr-u2t]

Стара и добрая ручная цикля. Мы такие делали в училище

[@sergeyivanov2989]

What is used to clean stones?

[@GRINwood]

400 grit diamond stone

[@PeanutsDadForever]

Cool

[@BMcFamily007]

Did it tell what type, name brand & perhaps where to purchase this perfect scraper?!

[@rudlterranigma5386]

DIY! There is no magic, just 1h in the workshop. (Including sharpening and a cold beer after finish)

[@bradleytuckwell4881]

Is that a box cutter blade

[@GRINwood]

Yes it is

[@dang6832]

Kind of hard to argue with results like that.

[@ВячеславДолбин-щ3й]

Здається нас чекає новий проект

[@leventedomosi7516]

👍

[@cha0t1cjazz]

It's interesting, but I made exactly same thing few years ago)

[@Bezborodov_Nikolay]

👍🔥

[@glenb1972]

A link to the scraper video itself would've been nice.

[@GRINwood]

It's here: kzbin.info/www/bejne/lZ7cYaZtbc13oq8 Thanks for watching

[@PetroHnatyshyn]

Яка грітність каменів?Дякую.

[@GRINwood]

1000 та 8000 гріт

[@ОлегС-к6ж]

👍🇺🇦

[@KennyMcKornick]

Hello!

[@GRINwood]

Hi

[@Tatal.b]

Será que da de cortar o dedo ? 😂😂

[@Lionprokl]

Не знаю какое он там дерево строгает , без сучков , мягкое какое-то , пусть покажет на других досках

[@АлексейКрасулин-ъ3ъ]

🤔👌✋

[@Ведмідь-к5ш]

Доброго вечора) Здається відео про цю циклю вже було? Але для тих хто не знає дуже доречно. Дякую

[@GRINwood]

Так, кілька років тому я знімав відео про циклю, але на той час я не знав як її заточити. Зараз, вдосконаливши цю техніку, я вирішив поділитись. Дякую, що дивитесь 👍

[@tobiasbostwick9002]

😳

[@ocoro174]

wow goated as fuck

[@ПавелГалицин-ъ7е]

Затачивать лезвие стоимостью 1 цент? Новый уровень мазохизма.

[@Firsenberg]

Бля не могу смотреть как он пальцами протирает лезвие. Аж корёжит.

[@GRINwood]

Но ведь оно тупое, я по камню тру практически под прямым углом, там режущей кромки не осталось, им порезаться сложно

[@daniallemons9343]

Those blades are so cheap I would not waste my time sharpening them. Just going to buy some more. Sorry.

[@ChiefTiff]

Did you miss the point that the sharpening method applies a tiny burr on one side? If you just put in a new blade each time you're not getting that burr and the blade just works as a reverse-rake cutter and may not produce as fine a finish. In any case though I suspect replacing the blade may take longer than the 4-6 touch-up strokes per stone as shown in the video.

[@Gadadharadas]

​@@ChiefTiff, I agree completely.

[@muratsakiroglu9743]

Alllööööö Alt yazı kullan alt yazıııııııı .