Installing an AVS Aeroskin Hood Protector

Putting an AVS Aeroskin hood shield on your vehicle is quick and easy. There is no drilling required and uses preapplied 3M adhesive.
These are available in 3 finishes, Smoke, Chrome and Matte Black.
www.sharptruck.com/bug-deflec...

[@davidjacobson9463]

TY!

[@john1josjohn1jos]

Would using a heat gun or a blow dryer help the tape stick better?

[@victoralvarez4852]

Is this low profile or original? Been looking around

[@JoeL-yf4ee]

Won't the winter salt stay on underneath the shild no matter what?

[@Talon1983]

I’m trying to understand the purpose. By installing this it causes damage to the paint and traps dirt?

[@alonzowitt5931]

Just how well will that tape stick to the hood in very hot climates like the desert where it gets 115-18 degrees in the summer? And how do you ever remove this AVS if it needs to be replaced?

[@jason6623]

Will it mess it up if I do it outside in the cold? I got my wife hood shield and in channel rain guards and want to install them.

[@jusaltben]

Jason, the hood needs to be at least 30° for the tape to stick properly. If it is any colder than that the 3M tape might not stick as well as it should.

[@jason6623]

That's kinda what I figured. Thanks for the reply.

[@joeyrh9]

Dont do it guys, adding accessories with 3m tape will become a hassle later. The stuff literally will bake on your truck and you will have a hell of a time taking it out. Some of you are wondering "well, I don't plan on taking it off". Well I have news for your, YOU WILL END UP TAKING IT OFF because the deflector will lose it grip on the tape because the sun will be baking it. This is not a choice. It will happen and when you remove it to put fresh 3M tape, you will have to remove the old baked on gunk which will give you headaches. Don't do it!

[@jonteesdale18]

3M eraser wheel on a drill. Done!

[@EZ4U2Say11]

Heat gun and done

[@JoeL-yf4ee]

@@jonteesdale18 Won't the winter salt stay on underneath the shild no matter what?

[@CultivatedBunny]

All you need is some some goo gone and a hair dryer. Comes right off.

[@JOHN51977]

Adhesive remover and a wheel

[@XX-fq8kp]

THIS IS REALLY A TWO PERSON JOB..

[@jimmyt7514]

No Bueno, what happens if it breaks? there's goes the paint, very cheezzy product...

[@drivin379]

Well get one with Zeus fastners