Here's Why You Should NEVER Buy A BUG DEFLECTOR! (Because You Just Might LIKE IT!!)

[@ToddModule]

In Florida, window visors are a must & I have had them on my last 3 vehicles. Allows the car to be vented sitting in the hot Florida sun without any rain coming in. Although, small drawbacks are bugs occasionally getting in & people using leaf blowers around the car can make a mess inside, but I wouldn't have a vehicle without them. Just got a bug deflector, mainly for looks.

[@smarble85]

I am just watching your vids for the first time, and boy are we cut from the same cloth. I very much have the same taste of subtle upgrades that enhance a vehicle without dramatic changes and cost. Great videos!

[@arabcampers9554]

Your suburban look ABSOLUTELY beautiful i love how its in great condition .

[@cessealbeach]

My dad had a 1998 suburban, dint't make 100k, had all kinds issues, remember this ride, taking us to school, your ride looks good

[@MrPuga05]

Thats not a squarebody. Squarebody body from 73 - 91 suburban, k5 blazer, 3/4 or 1 ton truck and 73 - 87 1/2 ton. Thats a obs style suburban 92 to 99

[@nullify.]

Again with the click baity title. Are we in 2011?

[@rontiemens2553]

Bug deflectors would really be great if they actually deflected bugs.

[@hwsadberry6781]

They do deflect bugs, grasshoppers, rocks etc. They aren't and never were intended to keep your windshield completely clean from bug guts. Keeping the front edge of your hood from taking damage from direct hits from hard bugs as well as the acid from the guts along with a bit of security from rocks was the original intent imo. Take a look at an older truck that never had a guard and look at one that has and you will see what I'm talking about. The guards on the 1ROAD Suburban are nearly the same as I had on my Tahoe. Not only do they serve to protect the paint job and the windshield but look great on that body style. I had to replace my hood guard once after a rock hit and broke it. No doubt it saved me from taking more expensive damage.

[@rontiemens2553]

@@hwsadberry6781 Good point.

[@cessealbeach]

They work, it would deflect most bugs

[@T6Jacob]

@@hwsadberry6781 thinking of getting this for my dads Accord. He daily drives and it gets chips all over its hood

[@ryanfish8560]

@@T6Jacob he's following too closely behind others. Especially trucks with offroad tires pick up road pebbles and fling them much more

[@michaelmurray5413]

Looks Awesome now all you need is a AAA sticker looks great.

[@williamstevens4824]

Your Suburban looks great. Nice and clean. 🇺🇸

[@DaveSomething]

are you yelling at kids to get off your lawn yet?

[@hillshawn]

This is a sweet suburban! You do a great job of keeping it up

[@1RoadGarage]

Thanks!

[@toddstevely7095]

Have a 95 myself... also love the bug deflector and window deflectors as I also have them on mine!

[@bradhickman1618]

Can you tell if the window deflectors increased or decreased the wind noise at highway speeds?

[@Heavychevy0402]

I personally think trucks look better with these installed. They preserve paint from rock chips and bugs , protect windshield from bugs in summer country driving. That’s really the main pro and why so many have them.

[@cpscps2679]

You just need a bigger parts cannon !

[@jaydegelder2964]

I bought my 1992 chevy with the window deflectors and the bug guard on front. They both seem thicker than yours and are wider but I have no idea where they were purchased or installed. But I must say I love them. This is the first truck that I've had them on.

[@x-man5056]

Only had one truck with deflector on it. Was on there over ten years. Ruined the paint down deep in there where I couldn't wash well. Also had a small rock chip in the windshield. You can't win. Run what you like, it's more of a trim item than a deflector though. Cleaned all kinds of bugs off my windshield in N. Carolina. Maybe deflects Nats, I don't know. I have those side window shades also, mine are the 3M tape on's. Biggest problem with those is having them blow off going down the road. Dang 3M tape is a bear to get loose but be damned if it has not much problem on it's own. The shades are nice in humid area's where in spring you may not want defrost on but feel being able to see is sorta important too.

[@ronaldgartner3700]

I have a 01' suburban, I love my truck. But I live in MI so rusty but trusty. I love how sweet your truck is

[@314jeepsnmopars3]

Your Suburban looks great! These trucks are a classic and are very handsome trucks. I have a love for squared off 90s suvs like my 98 Grand Cherokee.

[@srcastic8764]

The hood bug deflectors are actually incredible. If you’ve ever driven through an area with heavy bug infestation at night where you can see it working it’s truly amazing. I had one on my truck years ago and it was a life saver as I worked a lot at night. However, I ordered the Weathertech for my 2018 Silverado a couple of years ago and was incredibly disappointed. The screw holes didn’t line up with the factory locations on the truck and once mounted it was incredibly wobbly and it was obvious it would have scratched my hood up badly. I ended up giving it away to someone else. I’d like to get one for my truck now, but don’t know which one would fit securely. I know it’s not the Weathertech!!

[@craigemery856]

AVS

[@MoodyDudey]

Expectations: He broke his truck and it’s un-drivable. Reality: Product review... 😂😂🤣 not hatin’ just sayin’

[@BillysWild]

Click bate

[@MrJRod891]

@@BillysWild bait*

[@tonybrown9875]

Only deflectors I ever liked was the Bug Shields by Armadillo on 70s/80s trucks. Ultra retro. Otherwise no thanks.

[@kstricl]

I used to drive a 1995 K1500 as the parts delivery truck with the same deflectors. The rain guards are sure nice on a hot but rainy day. The one thing I still kind of like that you're missing is the big sun visor - but the one I remember was pretty noisy.

[@sheriwillhite2697]

Tim here, I have a 96, black and white, brush guard, spare on the top, three antenna's, lights all around inside and out with power inverters(2), and will be getting bug deflector and window trims. I'm 65 so I don't care what people think. Like what you are doing.

[@fwblack]

Like you channel and I've learned a few things, but... it is not a "square body"... they ended in '91... I've had both and currently have a '92 Blazer that's the same body style as your Suburban.

[@StormLaker]

I live in the midwest, and I frequently drive on gravel roads.......a hood deflector like this is a MUST.

[@brandonkahuna1251]

Window visors are a must for every vehicle. I've never been a big fan of the hood bug deflector, but they look pretty good. Just not my thing. My first set, over 25yrs ago, were in channel. I thought that was the best and only way to go. Over time I found out they come with some problems and headaches. Been using the outside tape ons ever since. They work great. I use the AVS brand though and never had a issue. Love the truck and original look with the factory rims.

[@BrawndoQC]

lol no it's not, it's old fashion that expired in the 90's.

[@Fox_Pawtography]

.😊

[@007connecticut]

Weather tech are the best. The old style bug deflectors work great. The new ones are not as good, more for rocks chipping the paint. Years ago they were straight 5" ish flat plastic that really kept the windshield clean.

[@SilverBullet93GT]

Your Canyonero looks amazing

[@orangemanok5800]

I bought one of their guards for my 2000 Ranger when the truck was new. It lived in the California sun most of the time. It finally cracked last year. 22 years is a pretty good lifespan for a hunk of plastic.

[@franktstets8037]

Mine are on a Dodge Nitro and they are Wade by Weston made in California. They are the in channel type don't like the stick- on type. I trimmed my corners with my Dremel tool smooth operating now

[@patricknugent771]

Looks great! Personally I prefer the vent shades that stick to the door than the in channel. I've had the in channel visors brake over a short period of time from opening and closing the windows.

[@stevefritz6843]

Looks great , add a set of black nerf bars.

[@bentnickel7487]

You need a set of curb feelers next. I have a 98 Taurus SHO that I love and the window plastic (though I dislike) makes perfect sense to me right now. Your recommendation of Weather Tec stops my searching. Thank you.

[@bentnickel7487]

Continued heat then cold will challenge the adhesives on your additions, so your trips to the beach and the mountains will prove if they hold up.

[@thomasvess6253]

I’m picking up my 97 GMC Suburban 4x4 SLT Friday and I’ve been watching your videos for ideas, I can’t wait to get my new toy..

[@Tbonz19]

Hey Jimmy, I am a Grand Paw and I have had Vent Shade brand (bug and window deflectors) on my 99 Yukon for 15 years. Mine go over the window. Love your Truck and Channel. Keep up the great work for us OBS'ers out here!

[@robertocastillo2260]

90’s GMC front are the most beautiful !!!

[@peterbradley6299]

Awesome, Jimmy! Looks just like mine, same color too.

[@jaydegelder2964]

I do like yours. You didn't ruin it, you improved it.

[@Breakit_fixit_loseit]

The old (they defectors that were about 5” tall with zero angles, just straight up, and most of them were either clear or had a blue tint) ones on the square body Suburbans, actually worked. Growing up, we had a ‘74 ‘Burban w/ 454 and went on minimum 3 family camping trips a year. 2 of the trips were in the Cascades mountains in Washington. The other 1 was our annual trip to Montana to see other side of the family. So, 6 of us in this suburban pulling a 21’ Terry travel trailer with that billboard of a bug deflector. By time you got through eastern Washington, which believe it or not is partially a desert, that deflector would be covered with at least 2 layers of large insects lol.

[@andymccorkle9469]

Mine came from oriellys. They stick on the outside of the doors around the window. They work just fine.

[@Diana-wg1tm]

I bought one And? The front middle tip of the hood is separated. So when I put on the bug repellent. In. Front of it, the hood continues and it looks stupid on a 2022 Toyota Corolla. Waist of money

[@DetroitDieselDoctor]

Your truck looks much better now. You’ve smoothed the boxy look out. I’ve been using window shades since the 70’s when stainless steel was the “in-thing.” I’ve always added the shades I installed them on my 1998 zR2, 1500hd 4 door and most recent my 2011 Denali YukonXL. You keep your vehicles in great shape and looking great. 👍

[@jeepinspence]

Who cares what we think? I use them when I can because of the old adage form follows function. I’ve always thought they afforded a lot of protection and I love the ability to crack the windows in the summer and leave them down without worrying about rain entry. I don’t get the whole grandpa/old man thing I loved these as a teenager so…?

[@Carvingwanderer]

Did that to my 94 gmc k1500 within about 2 months. Also did fender flares and recently upgraded the mirrors. It looks great.

[@EuroGunOrg]

I've done the same to my excursion. Just love it. Unibrow is next

[@anulfadventures]

I have a '93 GMC Suburban SLE I'm working on. I'm using this site for my inspiration even though mine is nowhere as nice a shape as your '95.

[@a.r.o7697]

To make it a "grandpa truck" you'd have to put some silly looking running boards on it or a roof visor.

[@toddstevely7095]

Took my old man running boards off when it came home! Want em?! Haha

[@michealrobinson]

I've always used AVS window deflectors. Good quality and price. Never had an issue. I've only used the type that stick to the door. I just never wanted anything additional in the window channel because I've seen those types get loose and prevent the window from closing.

[@A.C.71]

I just put on the AVS deflectors but put them on crooked..is there a way to take them off and reposition them?

[@michealrobinson]

@@A.C.71 AVS uses 3M automotive grade 2 way adhesive tape, which is usually impossible to pull up and reuse. If it hasn't been adhered to the vehicle for an extended time i.e. more then a few hours, it may be possible to slowly pull the misaligned ones and reposition. In my experience, you will likely have to pull them, remove the old 3M tape, apply new tape and reinstall. 3M automotive tape can be found at just about any auto parts store. Pro tip, next time you go to install, position the piece where you think it looks and functions as intended, only lightly press on one position on each end to hold it in place while you take a step back to check alignment/fitment, if it's good, continue to secure the rest, if not, this makes it a whole lot easier to remove and reposition.

[@A.C.71]

@@michealrobinson That is a good tip. Thanks

[@kellyaustin7487]

Glad I stopped by, I was looking for a front bug deflector for my 04 gmc yukon xl but I'm really liking the side window deflectors on yours. I appreciate your video and review. Thanks.

[@michaelpakadronermike8146]

Can we get an update on the full transmission fluid change? Any ill effects? I am thinking about doing the same thing with my car.

[@1RoadGarage]

Hello Michael, I have no ill effects with my transmission. Shifts like new. But, don’t take my word for it. Please do your research to make sure a fluid change is right for your vehicle.

[@MrBowNaxe]

Exactly what I have on my '99... They look and work great Jimmy.

[@1RoadGarage]

Cool! So how’s the window rubber doing? Is the window able to roll all the way up without problem?

[@freedomdove]

I like my AVS window guards, but I did get the outside mount type. I'm currently shopping for a hood guard. The Weathertech seems to be my best choice.

[@Tablesaw818]

Looks good Jimmy. Not crazy about the mounting system for the window deflectors.

[@1RoadGarage]

Thanks! Yes, I’m second guessing myself... hopefully it works out well overtime.

[@jamesg6860]

Are you ever going to install a front windshield visor i have a 2000 gmc serria and i have one to put one on my truck

[@ED-ti5tc]

Nothing wrong with the way that suburban looks! I wish my 98 Chevy looked that good.👍

[@jboldt73]

In the thought of buy low, is it worth a #1 WW priority slide to pick up Pacheco and stash? I have Brooks on IR currently so I could slide him in there. Thoughts?

[@bradhickman1618]

Can you tell if the window deflectors increased or decreased the wind noise at highway speeds?

[@patrickpicansoiv9938]

Hahah never been so early. The deflector is a life saver when it comes to rock chips.

[@NotAnotherG]

LOL Grandpa jokes kept me from getting a bug deflector way too long. Definitely helps 👍🏻

[@chiphill4856]

Looks great! I put window deflectors on every vehicle. Gives the ability to crack windows when parked in the heat of summer. Weather tech makes good stuff!

[@alexisduarte3917]

Just turn on the A/C

[@rsmillican3299]

I like it , the deflector will help keep your windshield cleaner and small sand from hitting your windshield. I have watched you work on your burb.

[@doitbyyourself66]

Can u tell me how to fix a noisy bug deflector ? It makes noise in speeding above 130 km / h

[@ford1546]

It looks very good. I like the look but not always how they are mounted. If you mount something over painted metal, it will be often rust. dirt colect underneath and rub into paint. It is important that the plastic also has UV protection, otherwise plastic does not last long in the sun.

[@DriveChevys-526]

Tht Suburban is the cleanest I've seen, love that truck 💪

[@CertifiedSunset]

I'm gonna put one on my 2003 Chevy Tahoe LT, looking forward to it!

[@artdecco8617]

Good to see a great and honest review......before buying something for my 1995 Chevy Silverado 1500. Checking out Westin Wade hood deflector and wondering how that compares. Thanks

[@lcmm55]

I have a 2019 VW Atlas, tried AVS(cheaper than WT) and they did not have a chamfered edge and in the front did not go from The mirror to the top corner of the door. Kept falling out. The rear window kept clipping the visor. The chamfered edge is definitely important. Got a refund from avs and bought the WT. Perfect fit. My floor mats a Max 3D Pider. Less expensive and do not slide around like the WT.

[@OldManFrank]

*I have a bug deflector on my 2010 Explorer but, the styling of the side window deflectors just does not appeal to me - the bug deflector I bought used factor holes for the middle screws but, I needed to drill holes for the outer holes.*

[@whitefang4592]

Do you know where I can get a wiring harness for a 96 chevy k1500 5.7. I know you are more experienced than . Please help.

[@1RoadGarage]

I’d probably go to the local pick ur part... 🤷‍♂️

[@mike4796]

That is one fine Yukon XL much nicer than newer versions!

[@omarzowila]

It is a Grandpa Off-Road Beast

[@johndickerson9328]

My 96 had the window deflectors. I like it. 👍

[@PaulCTownsend]

I think you did a good job but the product needs work. I've had lots of Weather Tech floor mats and every one of them has curled up.

[@opera93]

Thanks,!, interestingly my two vehicles WEATHER tech LASER CUT 2015 Journey, & Fitted Mat 2007:GMC CANYON- are Super Premium.& stable ( in HeLENA Valley MT , severe range of Weather).. Interestingly, my Grandson lost (? ) ONE OF MY Truck MATS LAST Summer: still replacement Guaranteed!, ( I sent phone Picture od BACK,OF REMAINING PASSENGER MAT, GOT new marched Set( interestingly looks like my 2007 Set not made anymore....)!! Ps: my Daughter got set of mats , supposedly Brand name, look cheap compare to WeatherTechs.....etc.Actually, my Third Set of WT Mats: as I got set for 1997 DODGE INTREPID & forget purchase Date;; good product for use Northern Indiana , severe Cold *& weather too....where we used to live, Thanks for listening...

[@bmxdenver1]

Me too, the high sides curled inwards, it is very irritating

[@tlpoutdoorsman]

Looks awesome

[@thechuckster6435]

love the way your keeping it kleen we must be tha same age .. 58yrs old here anyway keep her kleen.

[@tenguronin1597]

Looks awesome and I agree that the older styles fit 😀

[@davekana8388]

WeatherTech is good stuff, the Suburban should last a lifetime, especially the way you give it 💕

[@OscarRodriguez-ln2om]

Anyone know if these come off when you go through the automatic car washes?

[@biringen]

Add Bushwhacker Cut out fenderflares i think you will find that very cool.. and you will fit some bigger tires for overlanding without rubbing the wheel well..

[@vincentvillanueva3234]

I took care of my truck for years. No dents or nothing, until we started using the freeway, now the paint is chipping and that would of protected it

[@jameshelms190]

It's not the square body style.

[@hughstephenson2957]

No, actually they are what are called "OBS" for "old Body Style

[@anthonyperotti151]

I have a 2012 Silverado crew cab. Had the WeatherTech in-channel model on all four doors. The rear doors...the clip moved down slowly. Just enough that when the windows was eventually rolled down. Each flew off the truck at different times...after having been installed for over three years. So...periodically check this clips.

[@craigmyster4063]

I have the same ones in mine. I've had them for a couple years now and for the most part, no leaks or scrapes. But, the front window deflectors near the mirror don't seem to stay in their spot very well.

[@bradhickman1618]

Can you tell if the window deflectors increased or decreased the wind noise at highway speeds?

[@craigmyster4063]

@@bradhickman1618 it's about the same with or without, since most the wind noise for a 90s OSB comes from where the door meets the cab.

[@eldiablo2044]

If alot of the milage is done on the highway these are a must have if you dont have a lebra mask. I can put a little bit of looks aside to protect the front end of the vehicle but thats just me. My truck is all black so everything blends anyways

[@broncanus9222]

Let us know how your window deflectors work out in the future. I've seen that the deflectors that you have installed which go into the windows wear out your motors quite quickly. Did you consider this and weighed the pros and cons before your final decision?

[@1RoadGarage]

Hmm. I hadn’t thought of that. I guess it’s possible. I haven’t noticed anything as of yet.

[@broncanus9222]

Cool beans man. Stoked you replied! Yes look into it. I'm really excited for you and your family with your move to Tennessee. Thank You for all the hard work and great information in all your videos. On behalf of all your subscribers Thank You.

[@YouLookinAtMe-Bro]

I don't understand. Can you please explain how they could wear out the window motors?

[@robertphillips93]

Thought I might have to settle for the adhesive mounted vent shades for my SUV -- then found the W-tech items. They are tight and you do have to fiddle around to get optimal seating, but mine don't have the clips. To increase the overall "slipperiness" of the glass I siliconed the crap out of the side channels and cleaned the top edge well. For a month or two, every time I got in the vehicle my synapses were telling me I'd left the windows partly open . . . but they are really good to have.

[@KevinLSX619]

I actually like the unibrow thats been on my NBS sierra forever

[@carlglacken2050]

I always use the outside mounted window covers they don't leak like those always do when driving . But still it looks great.

[@samsquires2877]

Looks good all my Chevrolet trucks have vent visors and bug shields.

[@mikeydejon2148]

How do you raise hood latch

[@thomasbrunt9323]

I love your Suburban, have you thought about doing a winch under the bumper? I am thinking about doing the Rough Country kit on my 1992 k1500 Blazer.

[@swolarvortex]

I've had one on my 95 for forever. I've always preferred the look. Plus all the country driving would have made the nose look like my roofline after all these years without it.

[@warrenshattuck7547]

Bug deflectors make the chevy/gmc's look amazing I have a 98 z71 and I'm going to put one on it. Love your videos suburban is in great shape will last a long time huge fan of the obs body style

[@Wayz2Bpaid]

Looks good Bud! Got them on my 95 Z71. Have you done a Knock Sensor replacement yet? That's the last sensor I need to replace. 285,000 miles and going strong. Just put a Redhead steering box in, Expensive but Wow..... Such ease to steer, no play whatsoever....

[@jtj1331]

My ‘94 ext cab already has a bug deflector but will do the windows also

[@miguelrobledo8847]

Hell Yeah Truck looks Gr8 I'll definitely look into Weathertech

[@PuffsDragon]

on my town n country van I had the deflectors that tape on . they eventually loosened up and would flap in the wind. I re-taped them twice. on my f150 I went with in channel. I had to shave a little bit of plastic off to let the windows seat properly but now its a beautiful thing. if you don't like those clips you can get 3m tape and use it. I think in the long run the clips will hold better. they do look fine. im debating about adding a bug deflector, do they actually deflect bugs?

[@1RoadGarage]

Good tips. You know, I’ve never actually witnessed a bug being deflected from the windshield. On my next trip maybe I’ll update ! 👍

[@wheelstandr]

I run the vent visors on all my trucks. However, I do remove all bug deflectors. Way too nice looking without it.

[@familypurcell8008]

I think the new bug deflector looks better than the one that was on it before.

[@aaronpowell4885]

Looks good! I'm about 50/50 on the unibrows in general but I like it on your burb. I've had avs ventvisors on my 1990 c1500 for 12 years, replaced the adhesive about 4 years ago, otherwise they've been great! Also just installed a set on my 01 Silverado z71. The stick on avs brand aswell. I thought about replacing the ones on my 1990 with the in channel version as mine are getting brittle after 12 years of desert sun. but after seeing how your weather tech visors fit the gmt400's I might look into other brands before changing from the stick-on type. Thanks again for another great video Jimmy!