Shaving my 240SX Engine Bay | Budget 5.3 240sx Build Pt. 4

[@meangreenrt7608]

3 words: QUALITY over QUANTITY. Posting every other day or 2 days is fine with me 👍🏽

[@johnc7678]

I vote making a video over the course of two days if not much progress is made!

[@minicossie]

Love that you welded all the holes. Will turn out supergood!❤️

[@JUBBS417]

Just take your time kalvin everyone digs the 300zx bay so please bless the 240sx with same quality its your baby!! Keep up the work though great job!

[@lukehoar7169]

I think you should take the time and weld all the holes , I get so stressed doing all the finer details on my own car but when I watch your videos it makes me want to get out there and do it to the best of my abilities and done right ! 👌

[@PeterFrancisMartin]

Getting a solid groove man, really like where your editing and transitions are going as well. I also agree with a lot of the comments below, Quality over Quantity, post less, but with more progress etc. You will be at 250k subs before you know it (and hopefully start getting paid too, you deserve it)

[@pumdiada]

Kalvin, my man, i've been watching your videos for a long long time. In my honest opinion you are too worried about what people might think or say about you and your passion, this channel's content that is. Inlike your videos a lot, especially because you do what you like, and i think you do it very well too. F**k the haters, the talkers, your work speaks for yourself! :) Keep it up, and try ti enjoy your pssion!

[@theaxelerator_]

Definitely the coolest youtuber that I follow. Keep it up man!!

[@226sickology]

Dude that engine bay will be fire af just like the zx

[@george9267]

Kalvin were all here cause we love your work. Take some pressure off and do what you want. Either take your time or nuts. We’re all along for the ride

[@shaneblacklord3313]

Kalvin, please fill all of the holes. I know it is time consuming, but it is far more professional, and in the end you will know you have done things to the best of your ability.

[@Mexirican16]

I wanna see all those holes welded. I feel it would be worth it in the long run. And gives me a little insight on how to do this on my s13😊

[@rvdical]

your content, while not the most professional, is honestly mindblowing to watch. proving that making high quality and DETAILED show-ready cars can be built in a garage with a couple of buddies. Absolutely love what you're doing, keep it up chief

[@kizjay2730]

Here in Australia it’s the long weekend and I’m getting my engine bay ready for paint but didn’t feel to keen on doing it. Watched this video and now out in the shed going full tilt at it. Cheers for the inspiration.

[@Nissan570Lsx]

For the wiring check out weather pack connectors for anything in engine bay. Keeps connections sealed from moisture.

[@dougcohen3364]

For better "quenching the weld" try a wet rag, not dripping cus it's messy and you want to avoid getting water on bare metal. Dab with the cloth after welding. Also multiple wet cold rags can be used to surround the area to be welded. Helps stop the warping that can be caused when the heat spreads out across the metal. Pro tips ;) i-car certified in mig

[@Dre.Elevates]

Love it man !! I get excited every time there is a new video 👌🏼

[@carlosnoneya224]

Nice work and tips.Fill in those holes,you'll be proud letter

[@jeivygarcia3428]

Your work ethic is something else man.

[@jakevoysey9192]

i wanna see another shaved and tubbed bayyyy!!! loved the last one :D

[@YoBoyNero]

Kalvin I want you to look at the engine bay of the Z and ask yourself are you dissatisfied at the finish of the engine bay? If your answer is no then apply that to the 240sx man I don’t mind watching videos of you covering holes in the engine bay of the 240 if you’re going to redo the engine bay minus well do it the right way without cutting any corners just like you did with the 300zx gotta tackle the 240 with not content with ”just good enough” attitude

[@dr.dodrugs8963]

you could tub the bay but that's pretty common, I'm in the process of making custom tubs for my s chassis. Everyone uses trailer wheel well or whatever it's called but I'm doing tubs made out of tubing, it'll be gorgeous.

[@maheshsukhram4982]

Hi Kalvin been watching your video's for a long long time. Keep on producing dude your channel's great man. Love the work that you do.

[@manny4450]

this is something i planned on doing for my builds, but make some badges and etch into them your build#, engine, and date you started then finished. not too big just a small detail

[@kheff46]

Hey homeboy! You need a media blaster, with walnut hulls. That's gonna save you time and hassle. Well worth the investment my guy!! Spend way less prep time, more perfection time! I know what you're aiming for

[@nickhunsecker826]

Kalvin take your time with the s13, I want to see that car done right. Also with the fuse box harness relocation, I saw your first video on it ,but it was short and was informative. I’m interested in modifying the oem harness to be compact and accessible under the dash. How clean can a relocated oem fusebox harness can be? Keep up the videos I’m glad to see your still making informative content. It’s so satisfying to see a good end result.

[@blkferrari355]

Kalvin, great video because of the progress. My vote is to weld up all the holes and make the engine bay look as good or better than the Z32’s. I like seeing the quality you put in your builds. Also my vote is for quality of content over quantity also; but it’s your channel and I’m sure that whatever you decide is fine with the audience.

[@StabTheDabb]

Repaint the bay Midnight Purple and get a new bash bar from street faction

[@raceday-iy7vm]

Get her done bro do what ever it's good for you .

[@z28gerardo]

Kalvin can you please include details of when you get around to the wiring!! It would help a bunch

[@z28gerardo]

LOVE THIS BUILD KEEP IT BRO NO MATTER WHAT anyone says you inspire me so much love the content

[@arden6035]

Yeah cal just do it right.you have the time and it brings good content.

[@crazidig]

A famous person once said, document dont create. You make good content just by doing cool shit, document it and turn that into video format. I love your work ethic, keep going man! Have you decided on what color the bay will be?

[@moisesalcala7450]

I am down to see 40 MORE DAYS on the engine bay🔥🔥

[@aaleexsaalaazaar]

Holy shit the amount of work you put into your builds bro, keep grinding, you’re gonna blowup any time now

[@infamous_turbolag9049]

Please do a detailed video of the fuse box relocation!!!!! Very few explain how to do a clean relocation!

[@jamesfcookjr]

Kalvin are you going to weld the seam’s to your strut towers to strength them up 🤔😊👍

[@cool_breezee]

Take your time with the build. Quality takes time and “patience.”

[@Bababoui1000]

Will you ever do tubs?

[@richardm713]

Glad to see the s13 Good videos I could see everything This is gonna look clean but what do u think about a tube and sticked front end

[@ramirogonzalez7471]

Keep up the hard work broski! 💪🏽💪🏽 I Enjoy your vids every time you upload 🔥🔥

[@Spatakula]

Glad you welded the holes $$$$

[@xZKrYpTiK]

sick builds dude your my hero

[@Alysavos15650]

take your time and do what you gotta do... quality and rush dont go together😏

[@JoshIsParty]

I'm used to waiting for weekly uploads. just take your time my man.

[@BrokenSilvia]

Good work mate

[@rhernandez2798]

Keep making that content man.

[@docbrown303]

do it legit man ! we like seeing you do this !

[@NineLivesEditing]

4/20 blazed this video, nice 😂🥴

[@slythemongoose9138]

I don't remember if you had an upper strut bar, but maybe fab you up one of them? Videos 3x a week, every couple-few days is totally fine if it makes a better video. Quality is where it's at for me 👊

[@z28gerardo]

Also if you want to fill all the holes you choose bro it’s your car , we love seeing content and how you do it and how it turns out

[@jacobrohlinger9038]

You should weld something that says kalvins garage in the engine bay somewhere

[@MrALEG213]

Hey bro, why don't u buy a lil sand blaster to prep up that engine bay? Nice video btw..

[@Agie08]

Great video man keep it up

[@joeydrifts]

I love engine bay/ body work videos for some reason. I bet you get your car running before me😂

[@ry996]

I find myself paying more attention to daily uploads that have "BUILD PT.xxx" in the title.... keep doing that shit. Like all the shakedown stuff for the 2j Z shouldve just been under the build playlist

[@Uglier.]

Thats what i’m talkin’ about 😎🔥

[@ihxE.]

I'd love to see a custom front strut bar

[@chasemoneyy]

Would rather see you go in on the engine itself and get it looking crazy clean

[@chasemoneyy]

if your planning to swap it again anyways you can worry about making the bay perfect when that time comes

[@rinorzmajlaj]

You looked and sounded bumped in this Video. Don't stress to much. Do like 3 Video a Week and Work every day on your car. So you have Videos filled with content and get with less Videos more views. Keep grindiing Kalvin. Your hard work will pay off. And try to save as much Money as you can to move to Florida. I think, thats the one Thing you need to get the big rock rolling.

[@tunstall10]

Firewall to strut top gussets

[@oldglorydrift]

Work with texas speed to get a cam

[@kaidenhall3223]

Add a see-through intake box

[@yahirmendoza5950]

Just take your time with the build

[@nazarbratko3401]

How much you charge for swaps

[@shaefinlay1909]

100% weld every hole it will look so much cleaner

[@ginoplsm8]

imo you should cover the bay with truck bed liner

[@waymenlawrence2064]

Fill them all make a show car engine bay that's kinda you and your style as far as I've been following you

[@leo2jzgte]

Make it like the Z 😍

[@C0DG0D22]

Take a whole week if you need to. Look at goonsquad. Their videos are always long and they get so much done. Much more enjoyable to watch that way

[@ceeloc4420]

Great video

[@MRTuning704]

I don’t wanna do my bay... but I’ll have to when I do the clutch

[@Went__Awol]

The song in the beginning. really? You doing diy videos now?😂😂

[@Joebamms]

*Early roll call*

[@jonathanrojas4841]

If two days produces better content I’m good with that. As far as sanding goes I wouldn’t mind some content but not excessive. But as always great job on the bay will turn out sick.

[@jasonkmvang]

Kelvin dont half ass it fill the holes make it something your kids would be proud of ..

[@MrRoven009]

2 days max so you stay in the tubes algorithm

[@jesusrincon24]

DROP A LIKE!! IT REALLY HELPS HIM OUT!

[@Stelios.]

Make it spotless, otherwise you regret it in the long term 😉

[@fischerko3947]

Absolutely yeah Kalvin. Do it properly now and when it get to swaping RB, You'll be laughing.

[@C.JPhotography]

Daily , if it takes to long just time lapse it

[@WelcomeToTheMadness]

Well, you are the one that will be enjoying it. If it bothers you do it, if it doesn't bother you, then why even bother doing the rest of the holes. Meh, either way.

[@Gewdfellow]

Weld the towers dude.. you already stripped all the stuff

[@aaleexsaalaazaar]

I thought i was watching subaruwrxfan review lol

[@darg682]

Camera fell like... 3 times?

[@prostock83]

If you don't have copper use a peice of wood.

[@MrRoven009]

Do it right gee...

[@MrRoven009]

#kalvenspec

[@luke_james]

Tub it

[@sabeehtahir6014]

Shave it

[@aitoblitz]

Eyy Im early I quesd

[@42gilligan]

Yes put more work in the vids. It's boring when you do a small job then talk for 10 minutes. No offense you do great work but I wanna see how it's done more then talking about it