Shelly Door Window Sensor with Home Assistant and Node-RED over MQTT

  Рет қаралды 13,731

KPeyanski

KPeyanski

Күн бұрын

Пікірлер: 46
@abbv2x
@abbv2x 4 жыл бұрын
Another great video! I like how you decided to cut the 'confusing' footage and explain why, thank you for being a 'real person' who has issues just like the rest of us! For constructive criticism, may I suggest a lapel mic for bench top talk, it should cut down on the echo. Looking forward to the next video!
@KPeyanski
@KPeyanski 4 жыл бұрын
Glad you enjoyed it, Adam. I'm usually using shotgun mic, but for the bench top talk I used the camera internal mic, which apparently was not a good idea. Thanks for your constructive criticism. Keep noticing stuff like this and keep watching :)
@MrBrettStar
@MrBrettStar 2 жыл бұрын
Something I’ve missed is how do I setup the user for mqtt broker?
@dartfrogdk
@dartfrogdk 4 жыл бұрын
Great Job Kiril as allways
@KPeyanski
@KPeyanski 4 жыл бұрын
Thank you Poulsen. See you around.
@Pabula
@Pabula 3 жыл бұрын
Can you use a 18650 battery instead of the 2x CR123a? if I recall correctly, from candleforums, the batteries should be the same size, just most of the 18650 are rechargeable.
@KPeyanski
@KPeyanski 3 жыл бұрын
I'm not sure about that, but it seems logical. Unfortunately, I don't have any 18650 batteries to test
@Pabula
@Pabula 3 жыл бұрын
@@KPeyanski Thanks for getting back to me, i confirmed with Shelly, and yes the 18650 will fit fine, the problem is, the sensor is designed to operate at 3v, while most 18650 are 3.7v, so he thinks it wont work, sad because there are really good rechargeable 18650 from Sony, Panasonic, LG and resellers like Nitecore that has 3500mh batteries, so it would be really good if at some point Shelly supports 18650 rechargeable batteries.
@lorenzodeluca3585
@lorenzodeluca3585 3 жыл бұрын
how did you integrate the shelly door in home assistant? I am not able to find it in home assistant, I need the shelly id to fill the config.yaml ( I was able to integrate shelly 1 and plug)
@KPeyanski
@KPeyanski 3 жыл бұрын
there is no shelly id, just use the method that I'm describing in the video or try the native shelly integration available in Home Assistant
@Xinud
@Xinud 4 жыл бұрын
Great video! Can you tell me if the Shelley Door/Window sensor is rated for outdoor use as well? Does it specify indoor or outdoor use only? I'm not able to get the sensor here in Canada yet but would like to consider using it for an outdoor gate.
@KPeyanski
@KPeyanski 4 жыл бұрын
It is not rated for outdoor use unfortunately. I wanted to do the same, but to protect it from rain somehow. Still thinking how to do it.
@CriticalCipher
@CriticalCipher 3 жыл бұрын
anyone know how to get around the dns issue? Running duckdns and can't get the shellies to show up in mqtt explorer at all
@KPeyanski
@KPeyanski 3 жыл бұрын
Can you try with a VPN? For example WireGuard - kzbin.info/www/bejne/mpecqZ2DqLOJl6s
@CriticalCipher
@CriticalCipher 3 жыл бұрын
@@KPeyanski thanks for the responce, have set up wireguard. Now do I tell the shelly to connect to the wireguard's ip on port 1883? Did test to see if wireguard is up, just alittle unsure how to use it for this use case.
@raulrodriguez9786
@raulrodriguez9786 3 жыл бұрын
How would I get the telegram message to only arrive if a door is closed and not when it is opened?
@KPeyanski
@KPeyanski 3 жыл бұрын
You should tweak a bit the automation. It shouldn't be hard just check the HA automations documentation
@iot_enthusiast
@iot_enthusiast 4 жыл бұрын
Nicely explained! I am using hall effect sensor 3144 for my doors
@KPeyanski
@KPeyanski 4 жыл бұрын
Sounds good! I don't really know that sensor. Did you manage to integrate it with Home Assistant or Node-RED.
@iot_enthusiast
@iot_enthusiast 4 жыл бұрын
@@KPeyanski integrated with home assistant using mqtt
@iot_enthusiast
@iot_enthusiast 4 жыл бұрын
@@KPeyanski please see components101.com/a3144-hall-effect-sensor for details
@Master-iv4vj
@Master-iv4vj 4 жыл бұрын
@@iot_enthusiast It's just a component. Show and explain the real life device.
@KPeyanski
@KPeyanski 4 жыл бұрын
interesting, thanks for sharing.
@PaulKelly1
@PaulKelly1 4 жыл бұрын
Can someone please point me in the right direction - I'm trying this with dw2 sensors, I got it working to the point where when I triggered a sensor I got a notification from gmail that something was trying to use my account (that's absolutely fine, I can sort permissions later but it PROVED that activating the sensor triggered an automation that at least ATTEMPTED to send a mail so I'm good with that so far, however as soon as I try to add a sensor section with "- platform: mqtt" etc. I can't validate my configuration.yaml file, it says: Component error: - Integration ' ' not found. What am I missing from my config? I've used mqtt explorer connected to HA and it correctly updates state etc. so why am I getting the configuration error? Any pointers to info appreciated!
@KPeyanski
@KPeyanski 4 жыл бұрын
Try to add mosquitto as home assistant add-on to see if it works. Just for the test.
@pnietos
@pnietos 4 жыл бұрын
433mhz sensor with sonoff bridge, Home assistant, send the state to the old wired alarm.
@KPeyanski
@KPeyanski 4 жыл бұрын
Very good solution you have. Nice job! I will also try this, but I have to find decent 433mhz sensors
@pnietos
@pnietos 4 жыл бұрын
@@KPeyanski This is the sensor I'm using, they beatifull and works oerfect: www.banggood.com/DIGOO-DG-HOSA-433MHz-New-Door-and-Window-Alarm-Sensor-for-HOSA-HAMA-Smart-Home-Security-System-Suit-p-1388985.html?rmmds=myorder&cur_warehouse=CN
@Tommyownzz
@Tommyownzz 3 жыл бұрын
​@@pnietos does it also report change from "open" to "closed" status? I am asking because I ordered some other Digoo door sensor (looks smaller than the one you have), and it only reports change from "closed" to "open".
@pnietos
@pnietos 3 жыл бұрын
@@Tommyownzz it only reports change from "closed" to "open". Example if you have the window open, and reset Home assistant, it will shows "closed".
@dretwav
@dretwav 3 жыл бұрын
Thanks so much. The pairing was a bitch. Had to do it several times. The key was after you set up wifi , quickly hit rest button to wake it up. After I got that working the rest was easy.
@KPeyanski
@KPeyanski 3 жыл бұрын
Glad to help & thanks for the tips! Enjoy!
@pablosergiohernandez
@pablosergiohernandez 4 жыл бұрын
Great Job!!!
@KPeyanski
@KPeyanski 4 жыл бұрын
Thanks, Pablo. Greetings from me
@ronm6585
@ronm6585 4 жыл бұрын
Thanks.
@KPeyanski
@KPeyanski 4 жыл бұрын
You're welcome, Ron! You're welcome...
@mrbilky
@mrbilky 4 жыл бұрын
Wyze sensors with the wyze hack for home assistant from Kevin Vincent works great
@KPeyanski
@KPeyanski 4 жыл бұрын
I will google for that wyze hack. I didn't know about it. Thanks for sharing.
@mrbilky
@mrbilky 4 жыл бұрын
@@KPeyanski Yep you don't even need a camera for it just the bridge and sensors
@healeydave
@healeydave 3 жыл бұрын
Are you still using this and how are your finding it? I have one installed but most of the time it doesn't work. The sensor battery is fine and its setup correctly but the transmission is slow slow from waking up to doing anything that its not recognised that anyone even opened the door. I have it configured in home assistant using MQTT. For example, HA says the door was closed 3 hours ago. If I go an open the door now, wait until all the flashes have finished (to signify its booted up and done its thing) and then close the door so it does the same sequence, that should be two sets of communication messages sent but HA still says the door has been closed 3 hours ago. valueMosquito logs, I'm seeing: "1611944068: New client connected from 192.168.X.X as shellydw2-483FDA8XXXX (p2, c1, k60, u'mqtt').
@KPeyanski
@KPeyanski 3 жыл бұрын
I'm not using it at the moment. I wanted to mount it outside and to cover it somehow in order to protect it from rain/snow. Unfortunately I didn't manage to think of some good cover till now and the Door/window sensor is still waiting it's time.
@healeydave
@healeydave 3 жыл бұрын
@@KPeyanski Ok, thanks. I did post on the home assistant group and one of the dev's advised that the build in Shelly integration in HA still in testing for battery operated devices but should be committed soon, so fingers crossed that will fix the issues I'm having.
@KPeyanski
@KPeyanski 3 жыл бұрын
They are really good news! Thanks for sharing 😉
Node-RED Basics with Home Assistant - Part 1 How To
14:53
digiblur DIY
Рет қаралды 86 М.
УНО Реверс в Амонг Ас : игра на выбывание
0:19
Фани Хани
Рет қаралды 1,3 МЛН
Mastering Node-RED: Custom Alexa Commands + Node-RED Dashboard
16:02
How to get started with Node RED and Home Assistant
10:25
JuanMTech
Рет қаралды 115 М.
Wake Devices Remotely Using Home Assistant and Wake On LAN | WOL
10:47
Home Assistant MQTT Install and Setup - A Beginner's Guide
10:44
Everything Smart Home
Рет қаралды 297 М.
Building my PERFECT Smart Home Control Panel!
13:24
Everything Smart Home
Рет қаралды 1,2 МЛН
Advanced Smart Home Dashboards Made EASY
9:44
Smart Home Solver
Рет қаралды 1 МЛН
Node Red for Beginners - 2021 Edition (Using Home Assistant)
14:48
The Hook Up
Рет қаралды 371 М.
Fully Kiosk Browser and Home Assistant
19:13
Jimmy James
Рет қаралды 192 М.