Trying ghost pigments in my resin coasters!!!!! Video #61

The product's that I used in this video are:
Enviro tec lite resin mixes 8oz for the top and 6oz for the bottom
Casting craft opaque pigment white 9 drops in 1.5oz of resin
Black diamond pigment sapphire ghost blue 1/8 tsp added to the above mixture
Blue mini confetti tubes 1tsp with resin
DecoArt Americana decor Metallics Deep Sapphire
Recollection Chunky Glitter Marine blue
***********************************************
Here is the link to my Amazon store.
Canadian
www.amazon.ca/shop/sherrymoulton
USA www.amazon.com/shop/sherrymou...
***********************************************

[@barbaram5787]

So gorgeous. Being stuck at home I'm binge watching so many new ideas (for me). I want to try everything, lol.

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 would love to see what you make 🥰🇨🇦

[@lullysmommyify]

Me too. Lol. Ive seen so many new and cool things

[@melimel9265]

me too, I buy all the stuff I would need then I never end up doing it. if I do its weeks later. lol

[@dianestanley3304]

I Love watching and listening to your videos! You are GREAT. 😻😻❤

[@KatieSanvick]

tip from one artist to another: try using plastic bottles with little nozzle caps- they come in all different sizes and when youre done you just remove the caps turn them upside down and let the resin drip out, and peel it out after it has cured then you can reuse them and you wont be using and throwing away so many plastic bags. beautiful effect by the way!

[@SherryMoulton]

Thanks so much and yes I have ordered some silicone cups I do have some of the little squeeze bottles I will have to try that thanks so much and thanks for watching 🥰🇨🇦

[@patcosta4117]

Great idea! I love the way the blue background shows through the flower

[@SherryMoulton]

Thanks so much 🥰 thanks for watching 🥰

[@poohbearcomingatyou7581]

“I am special” I love it!!!

[@SorayaZiziArtist]

Beautiful! Cool technique.

[@JaniceBlake128]

I love your older videos too

[@rendaowe]

Thank you, I loved this video! They all are beautiful so honey, stop being so hard on yourself. The ghost pigment was a great idea!

[@nancynorland260]

Beautiful...they are called beads, for jewelry or any other craft you need them for. I love your creativity, thank you for sharing. So much love.

[@tinabuenzow9992]

That is amazing that you can put a cured piece inside a non cured piece and the meld together like one!!! super cool!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 I thought it turned out pretty good 🥰🇨🇦

[@Oonagh72]

🤩👏🏾👏🏾👏🏾👏🏾 just watching and realized “how am I not subscribed to this chic??” I have now rectified that.

[@SherryMoulton]

Lol welcome to my special world lol. Thanks so much and thanks for watching and subscribing 🥰🥰🥰🥰🥰🇨🇦

[@susananderson1071]

I've been watching videos from several coaster artists. This is my favorite. The finished product is pretty from both sides.

[@pkotesky]

So pretty Sherry !!! Like always ! 👏👏🤩👏👏👏😍🖼💫👏👏🕊👩‍🎨😘

[@SherryMoulton]

Thanks soooo much 🥰 Happy Easter 🐇🐰🐇🐰

[@DAMArt-dq9vw]

Wow! Those are really beautiful!

[@SherryMoulton]

Thanks sooooo much 🥰

[@patriciabrowning2262]

Turned out beautiful

[@peggystearns5573]

These are gorgeous. Love the 3D look

[@SherryMoulton]

Thanks so much 😍

[@Malak-gi3gu]

Love your video and your work

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@margaretdietrick5401]

Great tips. Your step by step demonstrations are great!

[@SherryMoulton]

Thanks so much and thanks for watching. Love doing these 😍🇨🇦

[@sandyhughes4694]

Sherry, I love these!! You have inspired me to try to make some for myself. Thank you!!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@lullysmommyify]

Love watching to learn more about resin pouring. Thank you

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@pattieholder3917]

Wow, they turned out beautiful!!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@chelseaarlequin4812]

I was able to pick up a few containers of resin at Michael's. Try searching up resin specifically but if not try your local home depot I found resin there as well. Love your work🥰

[@SherryMoulton]

Thanks sooooo much I'm glad you found some..... Have fun creating 😍🇨🇦

[@ellishansen8115]

Just found your channel. Those coasters are beautiful. The interference or ghost colors are fun to work with. I find they show up better on a darker background, like that gorgeous blue you have.

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 yes I'm excited to play this them a little more 🥰🇨🇦

[@UniqueAgate]

So pretty...

[@beverlyaten1775]

Wow just watched your channel for the first time. Oh yes! Gotta try this! You must be my long lost sister! 🌞❤️

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 lol well hello sister 😍

[@debrasmith1592]

Gorgeous Sherrie, I love the ghosting

[@SherryMoulton]

Thanks me to was not sure if it would work. Happy Easter 🐇🐰🥰

[@hanneromeike9786]

I just found your channel and I’m loving your work!!! So beautiful these coasters 😍😍😍

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@mookzmom]

Love this technique, and now I'm thinking a snowflake pattern in the white with the interference in it would be to die for!

[@SherryMoulton]

Thanks sooooo much 🥰 I'm just in love with these even with all my miss happenings hahahahaha 🥰🇨🇦

[@carolnichols2692]

Impressive! The flip and no lip. Subbing!

[@SherryMoulton]

Thanks sooooo much and thanks for watching and SUBSCRIBING 🥳🥳🥳🥰🥰🇨🇦

[@MindyDrummond1414]

These are gorgeous, I can't wait to try this myself. :)

[@SherryMoulton]

Thanks so much would love to see them when you do 🥰 thanks for watching 🥰🇨🇦

[@cynthiacarr3294]

Awesome so unique Beautiful!😁💯

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@MonicaBarnesArt]

That’s such a cool idea love them❤️

[@SherryMoulton]

Thanks so much and thanks for watching 🥰

[@joallawestervelt6918]

Gorgeous

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@canavanseniorchrissy4003]

Nice job!!!...love the 3 D effect !

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@gladyskiplimoart]

So pretty 😃❤️💙

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@gladyskiplimoart]

@@SherryMoulton you most welcome Sherry!!! Great job 👍👏👏👏💕

[@SherryMoulton]

🥰🥰🥰

[@monamcculley219]

Really nice depth you got in these.

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@yolettahall4003]

Beautiful 🦋🌹❤️❣️

[@conniemorgan9992]

Pretty pretty pretty!!!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@margaretrangel7110]

Great Job Sherry. I’d like to give a shout out to Julia Cutts, “Pouring Your Heart Cut” in New Zealand... she also does the floral coasters and generously shares her expertise. I loved the blue coaster in this video... it’s one of my favorites. Blessings!💙

[@margaretdietrick5401]

Beautiful

[@SherryMoulton]

Thanks sooooo much and thanks for watching 😍😍😍🇨🇦

[@JERZEE847]

Curiosity got me, had to see the blue ones also.

[@SherryMoulton]

Lol I got you addicted hahaha. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@ninamcrae7295]

might be a help if you make up clumps of your center for the flower ahead of time and let them cure,and then add them to the resin later when you start your project.

[@lynnmariemoriarty9193]

So pretty!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@secretsquirrel7374]

I don't know why but I love the sound of the coasters knocking together

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes is does sound good lol🥰🥰🥰🇨🇦

[@a.k.5423]

Great video and technique! Thank you so much!

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@RinirocksArtistry]

They look great! Happy Easter!

[@SherryMoulton]

Thanks and Happy Easter to you as well🥰

[@bethdibiase5804]

It's blue Pearl. Pretty ❤️

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@MrsCynfuller]

Beautiful and Happy Easter to you

[@SherryMoulton]

Thanks so much and Happy Easter to you as well 🥰

[@Sooz3112]

They are beautiful. I can't buy Castin' Craft in England but I'm using alternative pigment pastes..trial and error - I won't give up until I get it right x

[@DOESRightDesigns]

If you notice when you heated them with the heat gun they didn't move at all like they do on your newer videos so I think that it will work for you. When I don't want things to sink or move I wait till it's pretty warm before I start to use it.

[@SherryMoulton]

Thanks sooooo much next set I will be trying this 🥰🥰🥰 thanks so much for watching 🥰🥰🥰🇨🇦

[@MrsCynfuller]

When I have extra left, I always have an extra little project to dump my extra resin in, a bookmaker or something

[@SherryMoulton]

Yes for sure.... I hate to waste the resin soooo expensive... Happy Easter and stay safe 🥰

[@MrsCynfuller]

A book-marker not maker lol dang autocorrect

[@SherryMoulton]

Lol I hate auto correct 🤣

[@vickiwhite603]

Had that happen to me too, with my freezer.

[@TracyD2]

I never played with epoxy. This video was recommended to me. I guess because I make soaps and such. Now I’m interested in other projects. 😩I’m crying because my house isn’t big enough for me and my experiments.

[@SherryMoulton]

Hahahaha I know the feeling to many things not enough room, time and of course money lol. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@staceymoten3202]

simply gorgeous. would have loved to see it in red.

[@SherryMoulton]

Thanks so much and thanks for watching. Well that could be done 😍😍😍🇨🇦

[@joycedavidson895]

I Luv these. I've gotta order some molds.

[@SherryMoulton]

Thanks so much 😍 and thanks for watching . I just put up my new one like this but pink's..... 🥰🇨🇦

[@karylgammon8760]

Awesome!

[@tsiraberger5360]

Looks amazing

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🇨🇦🥰🥰🥰

[@deetanner7153]

the group of four look like chrysanthemums 💜💜💜

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🇨🇦

[@margaretdietrick5401]

Very pretty

[@SherryMoulton]

Thanks so much and thanks for watching 🥰🇨🇦

[@margaretdietrick5401]

you're welcome. I hope all of you in Canada are safe and well. praying that this pandemic Will be over soon. Until then take care ❤🙏!

[@SherryMoulton]

Thanks yes all is well here hope you are as well. Yes hopefully it will be over soon . 😍🇨🇦

[@lindagray6029]

Beautiful.

[@SherryMoulton]

Thanks sooooo much and thanks for watching 🥰🥰🥰🇨🇦

[@artsabeach]

Beautiful! Was wondering, why not just do the blue layer first, let it cure and do NOT remove from molds. Then pour the clear/white/blue flower layer directly on top and let it cure, then remove from mold?

[@lauriekerestes7840]

Hi Sherry, I am loving that you use a lot of canadian products. Have you tried the mica powders or pigments from Windsor plywood. The few that i have used are awesome!

[@vickieradford3498]

I know you were not sure what you did different with the blue ones.... the hole was a little bit larger because the circles are a little bit wider.

[@SherryMoulton]

Thanks yes I think your right. Thanks so much and thanks for watching 🇨🇦🥰🥰🥰

[@istcian557]

Hey, sherry I am new to this field of resin art. Please explain few things if possible- 1 where we use pigments? 2 where we use alcohol ink? 3 where we use mica powder?

[@SherryMoulton]

I'm kinda new as well learning as I'm going lol. You can use any them anytime and I even mix them together. I find the mica power usually gives a non transperant colour. The alcohol is used when you want a little bit of colour. I also use acrylic paint when I want a solid colour. I think pigments are matt and the mica powders a shimmery. I hope this helps.🥰 Thanks for watching 🥰🇨🇦

[@istcian557]

@@SherryMoulton thanks..much clearer picture for me

[@SherryMoulton]

Glad I could help anytime 🥰🇨🇦

[@nadiaswanepoel8691]

I just found this channel and I am loving it. But I have a question (I am new at this so maybe a stupid question) - why do you remove the top (with the white flower) and then add it back later? Why not just pour the blue glitter on top of the first piece after it is cured?

[@SherryMoulton]

Thanks so much. Well I quit using this mold because it was leave a rim/lip so when I was trying this method I thought if I turned it over I then have 2 good sides and NO lip lol I now alot of work hahahaha but love the end results. Thanks so much for watching 🥰🇨🇦

[@Kimmie978]

These are so beautiful! Maybe I'll be courageous and give it a try!

[@SherryMoulton]

Thanks so much go for it and please I would love to see how they turn out😍 thanks for watching 😍🇨🇦

[@andreshurtado9478]

Visit

[@andreshurtado9478]

N by

[@teresawarriner8812]

Put some charcoal in your freezer and basement it will absorb Oder's. Love the coasters

[@SherryMoulton]

Thanks so much smell is gone thanks goodness 🤮🤣🥰 Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@sylvialonghurst8745]

Fabulous

[@tinaprocaccini4351]

Hi, I have subscribed to your channel, you make beautiful coasters

[@SherryMoulton]

Thanks so much 🥰 thanks for subscribing and watching 🥰🇨🇦

[@jenniferodell2681]

For your husband's pudding cup thing you are making use a rubber or silicone it will grip the cup better, maybe it is just a thought.

[@Kanchanrani1234]

Omg 😳 luk so Amazing ❤️👌🏻Waoooo Plz plz can u explain for Beginners. What we need & How many resin I mean measurements.

[@rilanajansen2652]

Looks wonderful, but why not take yellow or Orange for the inside of the flower? Now the inside of the flower falls away becouse the outsider is the same color?

[@brittanydavis5597]

In another video you mentioned that the reason you got such a beautiful flower effect this time is probably because you heated the resin, how much did you heat it and for how long?

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes actually it has to do with leaving your resin set for a bit. I now leave my resin set for 15 min before I start piping the white and it makes a huge difference. Once its piped you can use the heat gun to move it around but not for long. Hope this helps 🥰🥰🥰🇨🇦

[@brittanydavis5597]

Sherry Moulton thank you!!

[@AndreaStevens2012]

Another cool project! I am wondering if you've ever used a color other than white for the petals? Do you use the white for a particular reason, like, does it's density have something to do with the way it keeps its shape or? Just wondering. Thanks!

[@SherryMoulton]

No I've never used a colour but willing to try lol thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@judyortmeier4479]

Sherry, I was watching this video, and seen how much of the white resin you use for the flower. Why don’t you make a flower only with the left over, then when it is cured, do some clear or coloured resin over the top of it! Or if it would all run together, add something else to it, like the curly cues in the flower loops, you wouldn’t need to much! I don’t know but it would use up the left over white! Just some thoughts! Are you by any chance from Canada? When you mentioned Master Craft, gave me the idea! Love your videos, learn a lot from you! As for your freezer been there done that!

[@SherryMoulton]

Thanks so much for watching and yes I'm from Ontario Canada 🇨🇦 Yes I've now started making the full 6 coasters will have another video up sometime tomorrow. Not the first time for the freezer wow it was gross hahaha🤢🤮 So where are you from and I hope your being safe with all this crazy stuff going on 😍

[@EmilySilvergingerlocks85]

I looooove these. Just curious, do you use any other ppe or ventilation besides gloves and an open window?

[@charlottesills1174]

May I ask directions on mixing the white, also where did you get the white? Beautiful

[@carolynmichal]

Love watching your videos. Thanks for sharing. Every time I try these I get an air bubble between the two layers. I press them down just a little - not too much. I swish them around. If my touch is to heavy the bottom layer comes up over the edges and I have a mess. Any tips or suggestions?

[@judyortmeier4479]

Yes I’m from Alberta, we are doing real good! Live in the rural area nw of Edmonton about 50 Klms. Where do you buy your glitter and Black diamond hues? I’m kind of tired of having to buy from the US, sometimes it takes forever! Would like to get some suppliers here in Canada! You keep well! Going to try these just love the flowers!

[@SherryMoulton]

That's good we are safe as well . I get my pigments off of Amazon and the glitters I get from micheals.

[@shirellebryant8913]

@@SherryMoulton where can I find the molds. You make me want to do these

[@SherryMoulton]

I have these in my Amazon shops here are the links Canadian www.amazon.ca/shop/sherrymoulton USA www.amazon.com/shop/sherrymoulton

[@MsCountrykitty001]

Beautiful! I tried this technique and ended up with air pockets on the bottom side when I put the flower top on creating the sandwich of the resin coasters. Any tips?

[@kategreenway1025]

Hi Sherry. Why did you take the flowers out of the mold vs pouring the blue onto? Thanks!

[@lisetapps824]

Hello, I loved your video and I found your superb coaster 💞 I have a question I live in Quebec Canada is there another product that I could find here to replace casting craft opaque white pigment ? thank you and i will continue to learn some tricks with you! thanks 💕

[@gatorsem8427]

I absolutely love your coasters. I have a question, do you let your resin sit (particularly the white) so it's thicker and stays put?

[@SherryMoulton]

Thanks sooooo much and thanks for watching 😍 Now the first time I tried it I didn't wait at all and they turned out amazing that's the black ones, the second time was the blue set and it turned out , now I did another set and I warmed my resin up and that was not so good I could hardly hold the bag it was that hot in this set the white did not spread and was like a bunch of 3D lines I didn't like this lol. Now with the pink set I did not warm the resin but I think I over heated the white it was a lit toooooo spread hahaha ... such a trial and error 😜 can be expensive....... hope this helped a little. 🥰🇨🇦

[@SherryMoulton]

And no I don't wait , I mix all the resin and then hit record to video so you see when I do the white i dont wait ...

[@anukataria1919]

Could u please help me? When i pour white resin like a flower then after aome time whole white settles down at bottom and there is no 3d effect like yours.. what may be the reason?

[@SherryMoulton]

Thanks sooooo much for watching 🥰 Yes I've also been having issues. I've discovered when my resin is cold it does not work as well. So today I did another set and I warmed my resin first and it worked . Also I found when it was gone to long it didn't turn out either. Hope this help's 🥰🇨🇦

[@colleensmith5462]

love! can you show how you mix the white? please

[@SherryMoulton]

Thanks sooooo much. The white is 2oz of resin and 10 drops of casting craft opaque pigment that's it 🥰🇨🇦

[@annagray6491]

Love watching you create. Always lovely results. Can I ask a question please? Is that a 30ml cup you were using to put the initial resin in? Thanks!

[@SherryMoulton]

Thanks sooooo much and thanks for watching. Yes it is. 🥰🥰🥰🇨🇦

[@Pottedlady]

I tried your method of the double pour, first one worked fine, took that one out and did the second pour, well when I put the first pour on top, there was places that I couldn’t get the trapped air out so I have soft spots, any ideas what to do to fix it?

[@jessicamiranda7662]

Hi, thank you for the video. Im trying to do the same design as you did here. However having issues with the white resin. A little while after the design is completed, the white resin sinks and all the design blends together. Any tips on how to avoid this from happening?.

[@amiraclea9550]

What makes these flowers float and layer like that ??

[@katiewiserkrizek8055]

Can I ask why you pop them out and then put them on top of the background resin instead of just letting them cure and putting the background glitter on top? Just curious. Your coasters are gorgeous!

[@SherryMoulton]

Thanks for watching 🥰 I hate sanding so if I flip them both sides are nice and smooth......

[@katiewiserkrizek8055]

Sherry Moulton ahhh! Makes sense! Thanks!

[@SherryMoulton]

Not everything I do makes sense lol 🥰

[@katiewiserkrizek8055]

Sherry Moulton lol too funny!

[@harlemite221]

Sherry Moulton I love this. Thank you. Where did you get those large molds

[@Sara-ql2bb]

Hi sherry I love your video and I am happy I found you .would you please tell me what glitter you used in the center of flower ? I try to find in Michaels but I did not find it .

[@SherryMoulton]

Thanks so much I'm glad that you found me🥰🥰 the glitter in the center is called confetti tubes now I got these ones at the Dollarama here in Canada . I know that micheals sells them but not sure about the colours. Thanks so much for watching 🥰🥰🥰🇨🇦

[@Sara-ql2bb]

Thanks sherry for response. What can I use instate conffite tubes ? I live in united state and I checked dollars tree and Michaels but i didn’t find it.

[@SherryMoulton]

You could use any glitter . I just had them on hand. Thanks 🥰🥰🥰🇨🇦

[@ciomaria6137]

Fabulous work. What are the metallic curly-cues actually called? I’ve been looking for something like that and can’t find it.

[@SherryMoulton]

Thanks sooooo much and thanks for watching. They are called mini confetti tubes. 🥰🥰🥰🇨🇦

[@ThisOLmaan]

Sherry you let ur Resin sit a bit B4 adding the pigments? the reason I ask so far I been using Epoxy resin from UV Resin and I really Like Epoxy Resin better, but I been using my 24mm and some 20mm Ball Orb Mold i been trying Alcohol Inks the Lets Resin Inks nag they hardly give and effects for me, but Pinata yes are good, but the Ink when I drop in in my resin gives this running effects mainly on the sides not even being able to see the center on the orb, I saw many videos and they get some gorgeous effects. Now I do rush and drop my inks right after I add my Resin in, and my thoughts tell me maybe I should wait 15-20 minutes when I add my resin in my orb's or juz let it sit for that long so the inks won't fall and run down the sides to fast, thas my Theory at least maybe wrong, well hopefully you can help my love my runny inks LoL and Ur pieces came out sooooo Beautifully Muah Lovely😘 hope you can give me Advice TY 4 got to add sherry whats the work time of the resin Ur using?

[@SherryMoulton]

Thanks so much and thanks for. Yes from my experience with alcohol in when you drop it in right away it will spread if you do wait a bit they will not spread as much. Hope this answered your question. Have fun creating 🥰🥰🥰🥰🥰🇨🇦

[@ThisOLmaan]

@@SherryMoulton : thank you Sherry, it sure did answer my question Deary😊 don't get offended me saying dear, I'm an older fella all out of respect, i'' still astonished of Ur work you did really stands out you know when you add a picture to ur video just an eye-catcher or it will make you look twice. forgot to ask after I mix it and in case there are bubbles i leave it sitting for 5-10 minutes, How much longer should I let it sit after the 5-10 minutes? you know I thought Exopy Resin have longer work time or pot life, but mostly some Resins have 20-40 minute work time B4 it starts getting gel like I thought one had hours to work, really new to Epoxy Resin used UV Resin for a bit, but Epxoy Resing is much better despite the long cure wait its worth it.

[@whereyoubeensyn8481]

Ok.....what do I do if the back doesn't attach all the way and there's an air pocket

[@PattyPuckettPouringArt]

Very pretty Sherry. My top edge always has a lip. Does yours? How do you get rid of it?

[@SherryMoulton]

Thanks so much and thanks for watching 🥰 Yes this is why I tried it so both sides are smooth 🥰🇨🇦

[@ishangomber8479]

How many layers of resin are put in the coasters? Can you tell me the process of putting in the things? Is it resin, glitter, pigment, and then resin? Or is it resin, pigment, resin, glitter, resin, pigment, then resin again? I just wanted to know. Btw I love your videos.

[@ishangomber8479]

For the first part of the coasters before the glitter at the bottom.

[@SherryMoulton]

So for the first part I put clear resin in the mold then I add a small bit of glitter in the center then I put the white on. Leave it set for 24hr then I remove them from the mold add your glitter resin mix the mold then put the first layer on top. Hope this helps thanks so much and thanks for watching. 🥰🥰🥰🇨🇦

[@ishangomber8479]

@@SherryMoulton Thank you so much!

[@SherryMoulton]

Your welcome 🥰🥰🥰

[@bonitablackburn848]

Wait,wait,wait until your sire the wet resin is cool before you drop the cured pieces on top. I saw how the steam was sealed on other coasters you did. These are pretty but save yourself the wonder in why you have steam and the wster it creates.❤

[@SherryMoulton]

Thanks I will have to remember that for the next time 🥰 Thanks for watching ❤❤❤

[@susandells8595]

Please, please tell me where you found your silicone molds. I am so excited to try this. All of your coasters have been gorgeous!!!!

[@I.am.crafttini]

i don't know if you answered this yet but what are the names of your fire opal glitter match??? and where can i find them ??? thank you

[@SherryMoulton]

The glitter is Martha Stewart confetti glitter colour is fire opal. Be careful you wont be able to buy just one lol its soooooo beautiful. Thanks so much and thanks for watching 🥰🥰🥰🇨🇦

[@gourdhead22]

Sherry have you ever tried a different color other then white. I ordered the white castin craft op but I got yellow and blue.

[@SherryMoulton]

Thanks sooooo much and thanks for watching. No I have it and I just recieved my new one its blue .so will be playing around with it. Hopefully it will be the same as the white. 🥰🥰🥰🇨🇦

[@nancyscheneman4967]

My day with resin is a day with a lot of brain freeze! Love the video just found your channel. Very nice,I watched you put the white pigment in your resin and of course yours worked! I myself did the same thing twice now and both two ounce have not set up. I know it was mix correct because I use the remaining resin which was about 10 ounces on another form and it did set up fine. The two ounce came out like a piece of rubber. Same brand of pigment went into both projects. Green pigment fine white did not set. And the two ounce got one drop of white and green at least five drops. My resin was stone coat casting epoxy. Would you have any suggestion ? Is it just the white pigment. And the pigment is compatible with resin I bought it together. Thanks for your time!